Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?
Diswasher stopped working
\015 Our Kitchenaid dishwasher is only 2 years old and has worked fine since install. Christmas day we did a load of dishes, that same afternoon we loaded it again, but when we pushed on the "normal" cycle, the light did not come on. We pushed start, and nothing happened, and tryed the reset button. \015\012Still nothing works. We checked power to the unit, and it has power up to the control panel. \015\012Can you please help?\015\012thanks\015
There is a fuse in the washer that needs to be replaced reply to me and will walk you through it
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Bosh Diswasher SHU3326UC/U12 Diswasher pump is stuck at drain, motor running non-stop. Control cycle button not functionning, only the ON/OFF. What can I do? I try to put circuit breaker OFF and ON to do a reset. It didn't work
Dry out the catch pan under the dishwasher. Unplug the unit for 45 min. Repair man said this should reset the unit. ... Bosch Dishwashers
Control panel will not light up, the dishwasher was running and now it has stopped mid cycle and will not do anything. I just replaced the control panel (black plastic with buttons, not control circuitry). was running the diswasher and it seemed to be working fine, then stopped. water is standing in tub, I checked the float, I don't think the float is the problem. There is power to the outlet, no tripped breakers. But control panel will not light up.
I have a kitchenaid dishwasher model # KUDC10FXBL1 I went to start it and none of the buttons were working. I have checked the breaker and the wiring and everything seems to be in order. ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher
My fisher and paykel 605 diswasher seems to have a problem... the timer stop at around 58 minutes on normal cycle or 25 minutes on fast cycle? Can you tell me what I can do for this situation? The botton diswasher works fine...but not the top one? Thanks for your help. Marc
... Fisher and Paykel DD605SS Stainless Steel Dishwasher
My Hotpoint diswasher suddenly stopped working last night. It seems like it has no power to it, as the motor or pump does not seem to come on at all. Obviously when I get home from work, I will check the obvious first - making sure it has power to it, connections are secure etc. (I had a wire break before) If it does have power, I would assume checking the door switch and timer is next. Any suggestions, and any suggestions for checking the door switch and timer??
Sounds like your on the right track. I would use an ohmeter to check the resistance of the door switch by placing the meter probes on each side of the switch. Test while opened and closed position. Same with timer ... Hotpoint Dishwashers
Vz9446e1 diswasher not working via pressing buttons and closing door .but will work if i turn programmer . it appeared to go wrong when machine stopped in middle of cycle
... Zanussi 18 in. DE4744 Free-standing Dishwasher
Diswasher stopped working
There is a thermal fuse on the controller that commonly goes out. If you take apart the panel, and see the computer part, there is usually a part clipped on the side with 2 wires on it. When that goes out, it acts like there is no power to the unit ... Dishwashers
Diswasher stopped working
There is a fuse in the washer that needs to be replaced reply to me and will walk you through it ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
I purchased a diswasher (Hotpoint)about 1-1.5 years ago. It's model # is HDA3400G02CC and its SS# is TH887451Y. I don't think I registered it. No Matter, Two days ago, my garbage disposal stopped working. I checked the outlet. It had power. The switch to the Disposal was next to the outlet. I assumed that the switch was wired from the outlet. It wasn't. Bottom line, the switch nut was loose. I tightened it and problem solved. When I turned on the dishwasher, nothing happened. It acts like
I purchased your service (telephone support) and the dishwasher expert contacted me. We discussed the issue, he made recommendations. I followed his advise and solved the problem. Before I could recontact him, he called to follow up on my progress. ... GE Dishwashers
Whirlpool ADG993, door fault: Hi, a few weeks ago soemthing broke on the door to my diswasher and it falls open wide with no stopping half way as usual. That was fine as the machine could still work, but now the door won't close. All seems fine until you get all but closed and then the door raises slightly from the bottom right corner, preventing it from closing. It looks like something may be jammed in there which pushes the door up at the last minute. There's a man coming out on Friday,
... Whirlpool Dishwashers
Shu9925uc/14 bosch dishwasher leaves standing water in the bottom of the pump. The pump seems to be bad because it wont drain out the back hose. I have run the diswasher full cycle and put the drain hose into the sink to test. It wont drain at all now and I dont hear the pump. Perhaps unrelated: Pump seemed to stop working after the back hose disconnected itself from the back of the unit spilling water all over the floor. When I reconnected the unit to the wall the pump now seems to be disfunct
Hi Dishwasher not draining issue occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dish ... Bosch SHU9925UC Built-in Dishwasher
Diswasher stop working, it fills with water but doesnt do anything else. you hear clicking and clunging as you turn the knob is there anything that can be done
Look very closely at the wash motor shaft extension on your dishwasher. You’ll need to disassemble from the spray arm downward to get to it. A plastic shaft extension was installed from the factory. If something too hard got caught in the cutte ... GE Dishwashers
Please help my wirlpool ikea diswasher was working well but suddenly it stopped!I have one of those DWF small ones and have the buttons on the inside top part of the door. when I press the start button nothing happens and when I close the door the alarm sound goes off!! can anyone help me please
Try dropping power to the unit for a minute and see if it will reset itself. if not, you have a logic board failure. that or a door switch. check the manual for an indication on the warning alarm.good luckmark ... Whirlpool GU2400XTP Built-in Dishwasher
My Bosch Diswasher has a red indicator 'on' light which shines onto the floor on the right side of the door. It had stopped working and I want to know if it is just the bulb needs changing but
... Bosch Dishwashers
My Zanussi diswasher zdt 6053 built in has stopped working I have claened the filter turned it off and on and when the door is closed it clicks shut. The light to show the machine is on comes on but I can't change the programme from the normal one of 65. Please could you advise me on what I might do to fix it! Glenn
I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?
If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher
Kitchen Aid diswasher controls don't work
I had a similar problem with a KUDS01... model. The Baked on\012cookware and the high temp switches did not operate. The normal light would come on but the\012machine would not run. I opened the front\012to expose the timer/controls. There was\ ... KitchenAid 24 in. KUDI02FRSS Stainless Steel Built-in Dishwasher
Whirlpool Quiet Partner II: Was making loud noises while working. Then stopped working and cleaning light blinking only. Did the push buttons thingy - stopped blinking. Now just fills up, makes a humm
Mdb7759 Control panel stopped working, replaced it and got two cycles out of it and it stopped working again. I feel that this machine is a real lemon and should be recalled. Any possible solutions? I've tried the heated dry/ high temp wash reset but I does not work. Help
... Maytag 24 in. MDBH950AWS Built-in Dishwasher
The washer cycle stopped without warning, i thought the timer or the timer motor but it is not the timer works fine and so is the motor. but the timer motor runs til the washer motor starts than is the timer stops and the washer is working but not cycling so no rince or drain or soap etc... just pumping water. if you can tell me what might be the problem, thank you. like i said the timer stops when the washer motor start.
... Jackson JPX-300L Dishwasher
Avanti dishwasher stopped working. I have checked breakers-the dishwasher lights do come on-it will not cycle. When it first stopped working, the motor was working, but the dial would not move. I tried to cycle it to drain the water, but then nothing more happened.
... Avanti 18 in. DW19PSS Platinium Built-in Dishwasher
I have a Kenmore Ultra Wash Dishwasher model # 15951,it will be working fine then just stop working it will have no power at all.I leave it for a 2 days and starts right up , works for week then stops.
... Kenmore 24 in. 15932 Built-in Dishwasher
Hi I have a westinghouse 904. It stopped working. I found that it wasn't heating the water. The elemet looked fine so we replaced the thermostat The one that has the safety switch and now it goes to wash then it works for 5 seconds then stops. I have tried to use all settings including eco but stops at the same place everytime. It then flashes on normal.
Elements often have no visible sign when they go bad ....they need to be checked with an ohm meter ....check and replace if circuit is open ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher
My Maytag Dishwasher DWU9962AAB randomly stops during any cycle. I got very frustrated and kicked it then it started working again. Since then if I lean up against the door when it stops working it will start working again.
Had same problem with same model. replaced door switch/latch. $30 part. common problem ... Maytag 24 in. MDB7650AWS Built-in Dishwasher
Hi . I have a Zanussi DE6965 which has started displaying the error message AL6 every now and then. When it stops and shows this the water has not pumped out. If you turn it off, leave for half an hour or so and turn back on it sometimes works fine to the end. Sometimes it stops again. Eventually after several stop starts it works through. Any advice what could be causing this? Thanks.
... Zanussi 24 in. DE6965 Built-in Dishwasher
Hi, we have a Blanco dishwasher model number BFDW4. The dishwasher has stopped working, it fills with water then stops. We tried cleaning all the filters and we tipped it on it's side on a 45 degree angle to drain the water out of the Overflow reservoir but the machine continues to stop working after filling with water. Please help. Regards. Jayne
Hi,\015\012\015\012Sounds like you may have something jamming the circulation pump from turning. A dishwasher has steps in the cycle to complete before it moves onto the next step. once the unit fills with water it then circulates the wat ... Fisher DS603W / DS603B / DS603I Dishwasher