Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

Proper KitchenAid KUDIO1FLSS Door Balance Link Installation

\015 KitchenAid KUDIO1FLSS door not working. BOTH of the door balance link rope cables broke on this door at the same time. I have the repair parts but no diagram to show how the rope cables attach correctly to the door. The plastic piece at the door end has a 45 degree elbow that can attach one of two ways. Would like to know if there is a correct way or that it really doesn't matter.Thanks.\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Proper KitchenAid KUDIO1FLSS Door Balance Link Installation


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

How do you install the link door balance? - KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Need detailed instruction to replace Door Link Balance Kit for Kitchenaid Dishwasher KUDS01. Thanks


... Dishwashers

Hi, I'm working on a KUDI02FRSS0 for my neighbor. She complained the door flew open one day during a wash and the door had been very heavy since. A quick check on the internet, and I thought it would be simple... I installed an 8194001 balance kit. Both cords had broken. However, the door was very hard to close, and once you did close it, it would tend to pop open by itself shortly thereafter. When the door popped open, thanks to the new balance kit, it would not fly open as it had p


Is it possible that the door hinges or springs are installed backwards or upside down? Just a guess. Good Luck to you. ... Dishwashers

KitchenAid Dishwasher Door Pops open during cycle


The problem seems to be the loosening of the screws that hold the interior stainless steel skin to the door frame--not the latch. \015\012\015\012With the door in the open position you should find a total of twelve screws (5 on each side ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

The door release bar on our KitchenAid KUDV24SE is hanging loose and so the door won't open. According to the installation booklet, the dishwasher should be attached to the floor or countertop to prevent it falling over when the door is opened, so I can't pull it away from the counter for better access. How do I open the door from the front? Thanks.


Looks like a very tight spot to be in. Your best bet is to get the toe panel off (item 8) in ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

Door latch won't close on dishwasher. Hard to close. In addition door squeaks very loud- almost like it is catching on something. the dishwasher moves slighly when trying to close the door -it doesn't appear to be properly installed


... Jenn-Air JDB3610 Built-in Dishwasher

I just installed a new Kitchenaid dishwasher (Model KUDE60FVSS3). After filling with soap, closing the door and starting the machine, it fills with water, waits a couple of minutes and then I can hear low humming noices coming from down below. After opening the door it appears that neither spray arm has turned as if to wash. This dishwasher was purchased new a few years ago and kept in storage as our basement was being finished. This dishwasher has never completed one cycle. Any and all inf


If you have a garbage disposal, there is a plug in the dishwasher that has to be removed for the washer to drain. ... KitchenAid KUDE60FVSS 24 in Builtin Dishwasher

GE Quiet Power dishwasher door springs are not working. How do I properly install and increase tention for heavy door panel?


... Neff 24 in. S5409X0 Built-in Dishwasher

I bought the Frigidaire® 24-Inch Built-In Dishwasher( Model: FDB4315LFC) from LOWES 2weeks ago. It seemed work properly just after installation, but it had been stop again and again. if I press the door little bit forward, it run again but stop continuously every 5~10 minutes. It was new and I am sure i installed it correctly. What should I check up?


Check the door is not obstructed by cabinets on sides ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

How do I replace a door link on a KitchenAid dishwasher model KUDS02FRSS1


... KitchenAid Dishwashers

We have a MDB4651AWW dishwasher. It is very loud, we have the bottom front panel that seals the dishwasher at the floor but cannot figure out how to install it. One way it does not fit, the other way it won't let the door open and close properly. The noise is terrible and it has been that way for three years. We don't believe there is anything wrong with the dishwasher, figure the bottom panel will deaden the sound. can you show us how it goes?


... Maytag Dishwashers

Delamination I'm installing KitchenAid KUDS03CT which has the venting out of the top of the door. The steam and heat are vented directly beneath the edge of the counter top. The counter top is a preformed laminate over high density particle board. Will this cause swelling of the particle board and delamination of the laminate?


Its not supposed to as there is not that much steam coming out if it does contact whirlpool and check your installation instructions ... Dishwashers

How do we install a door balance kit on our Kenmore Elite dishwasher? Model is made by Whirlpool I understand. The plastic pieces are broken. The wheel and the spring are okay but the plastic piece on the string is broken and another plastic oval shaped piece broke as well. We plan on ordering a kit but don't know how all of the pieces go together.


... Kenmore Dishwashers

The door spring mechanism and/or balance has been repaired before on Model # KUDS02FRBL1 Kitchenaid dishwasher and is currently broken again. Any suggestions


... KitchenAid Dishwashers

KitchenAid KUDC25CH Dishwasher Just installed a new control board, last week after some lengthy emails we decided it was probably the control board , control board in now in, as far as I know the dishwasher cycles thru all three of the small lite rinse buttons ad it may have finished completely, there wasno water in the bottom of the washer so all was pumped out and the dishs were dry......the large rinse button on the panel is blinking. I open and close the door but the light contiues to blink


The system does not allow me to view what other consultants have suggested to you about the problem with your dishwasher.\015\012\015\012Before you try anything else, get a Finish dishwasher cleaner kit from the supermarket and run the di ... Dishwashers

I have a Diplomat ADP8234 and the door won't close properly. It appears to be a problem with the catch. I also can't set a program but I think it might be linked to the catch problerm. Any advice


Hi, I have the same problem and when I use a screwdriver to flip the door catch to what looks like a closed position the dishwasher works fine but once finished the same problem is back until I reset the door switch again. Did you ever find a solouti ... Dishwashers

I have a newly installed Kitchenaide dishwasher. The copper pipe is secure under the sink and appears connected properly to the dishwasher. When I turn the shut off valve on, water begans to run from underneath the dishwasher. There is no water under the sink. The plastic hose does not seem to be the problem.


You should be able to remove the panel below the door and see where water inlet hose is connected to the solenoid valve. I'd bet that's where it's leaking since you say it's newly installed. ... Dishwashers

I have a Kitchenaid dishwasher model KUDS01FLSS2. I finished replacing the door balancer cord and started the dw up and it started leaking underneath from the bottom somewhere around the middle of the unit. This is when it first enters the cycle, so there is no water inside. I pulled the DW out and look at the hoses and components under the DW and all looks in good shape and could not detect any cracks. However noticed that one of the hoses (not sure what the hose is called) that connects to the


In this Kitchenaid dishwasher model KUDS01FLSS2, the whole motor and water pump assembly simply sits (I think loose) in the bottom of the DW. From the inside, it is the round mechanism where the sprayer is mounted above the chopper, all one piece sit ... KitchenAid Dishwashers

How do you install a soap dispenser in a kitchenaid dishwasher? do you have to take the door apart?


Yes .take all screws out.when door panel comes out you will see the dispenser between inner panel . check for push tabs to release dispenser,then when reinstalling make sure add lubricant around seal so it will go in easier. let me know if i was help ... KitchenAid KUDS24SE Built-in Dishwasher

Our Kitchenaid 577-0 isn't cleaning--residue on door and now gooey (liquid, not powder) soap left in dispenser. Trying to dismantle the base to see if something's stuck in the food grinder but we can't get past the three star screws. I have the User and Installation manual but they don't deal with the internal workings. Ideas?


... KitchenAid Dishwashers

For the Kitchenaid model#kudso1flbl2 type 5770, the door will drop like a rock, if not supported. Does this sound like it requires a spring? Is there a way to fish out or reattach the old opring? How hard is it to install a new spring? Thanks Jeremy.


Very easy, take out the two screws from the counter that hold the unit inplace and only pull it out a few inches, then you can angle it a little and get to the spring. They are on the sides at the bottom (you can miss em) if its broke go to marcone.c ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0725 seconds