Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

Our dishwasher won't start. When I press the buttons, they don't light up. Is this something I can fix myself? Thank you!


Answers :

A common issue with kitchen aid dishwashers i have come across is the thermal fuse. it is located above the control board inside the door. Take the screws along the inner edge of the door to access the board. Make sure to disconnect the power or shut off the breaker because there is live power to the fuse. Check the fuse for continuity. There is a kit to fix this problem.
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

Dishwasher problem hi there I have a fault with the dishwasher. when i try and switch it onto wash, it produces a loud beeping, and all lights apart from the last 2 flash. i dont want to pay £70 per hour labour. is it something simple i can fix?


Your unit is trying to tell you that the door is not closed or the door switch is not working properly. i would guess that you will have to call someone out to repair the latch and switch as it has to have the control panel removed to gain access to ... Kenmore 24 in. 16222 Built-in Dishwasher

Hi i dont know the model of the dishwasher.. but the controls are fairly staright forward... a little knob for temperatur control and an on/off button.. and a light that lights up green when dishwasher is switched on... now the problem is as happened recently, when you switch the washer on greenlight is on and washer can be heard doing something but after a minuit or so the washer stops and the green light flashes. open up the dishwasher no sign of water or that it has done anything at all... th


It sounds like your washer is not getting enough water to start. If your washing machine is filling too slowly or not at all, then you probably have a clogged screen on the back of your washer. To check this: \015\012\015\012 ... Whirlpool Dishwashers

Lights blinking The light on my ASKO 3112 dishwasher wont stop blinking and it wont stop running, how do i fix it?


I have a 3122 and had a similar problem, Lights flashing, humming noise and me standing there scratching my head! I emptied all the water out of the filter basket and then tilted the machine backwards (only needed about 20 degrees) and then the rest ... Asko 24 in. D3112 Free-Standing Dishwasher

KUDP01ILBS6 Kitchenaid dishwasher Doesn't work, except flashing lights on front panel. I have the normal light flashing. When I push any other button the cancel light starts blinking as well. I replaced the fuse, the main control board inside and it still doesn't work. Push button panel next fix? This is getting expensive. Could it be something minor? The troubleshooting papers didn't provide much guidance.


The first thing I would check is if the dishwasher is properly connected\015\012 to power input. There is a junction box under the dishwasher. To get \015\012access to it you have to remove the bottom panel. The power cord should \015\012be connected ... Dishwashers

Whirlpool dishwasher lights on the panel dont come on and it dont run is there a fuse or something ??


Did you check your electrical panel/fuse box? ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

Whirlpool dishwasher I have a 2.5 year old Whirlpool dishwasher and all of a sudden it stopped working. It is getting power because the Clean light just keeps blinking. Do you have any idea if it is something I can fix for cheap or is the unit junk?


I had the same problem with mine awhile back. I tried clearing it out like the book said and it would start blinking again when I started it. Then it wouldn't do anything. Based on research, I decided to replace the heating element and that solved th ... Whirlpool GU2400XTP Built-in Dishwasher

With Kitchaid dishwasher KUDS01FL, it wont run. All control buttons seem to work (by lighting up when pressed) except "start". When press "start", it doesn't blink or start. Does this indicate a bad start button switch or something else? Is this something I can replace? Thanks.


Hi Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...-high temp wash - ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The dishwasher started making a really loud noise a few weeks ago. Then today the clean light started blinking and it wouldn't start. Fixed that w/ advice from this website and retarted the dishwasher. Now it smells like something is burning.


What your smelling? is the motor itself / bushings have worn out!! ... Whirlpool GU2400XTP Built-in Dishwasher

I have the Miele g863scvi plus dishwasher manuel and we accidentally stopped the dishwasher when it was not finished. Now the intake/drain light is blinking and the only other thing it will do is turn off and on, is there something we can do to fix it?


... Miele 24 in. Incognito G863 SCVi Built-In Dishwasher

My Ge profile Triton Dishwasher wont start when I lock it just keeps beeping and the" normal "light flashes there was something stuck in the turnstile and it stopped and beeped all night when I took it out it was left this way I have turned the power off and on and I still cant reset it any ideas it just wont reset


... GE Dishwashers

ASKO dishwasher D3122 drain pump wont stop pumping and the machine wont respond when we press any of the program or start/stop buttons. the program light is flashing. We can turn the power off with the main switch on top of the door but when turning it back on the pump starts pumping again. please tell me how to fix this problem so we can get it up and running again.


... Asko D3122XLSS Stainless Steel Dishwasher

Dishwasher wont work - starts but then stops and the light flashes. Have tried cleaning it out but dont know what else to look for?


Hello, Try this Crack the door open and then hit the following botton combination high temp wash - heated dry - high temp wash - heated dry then close the door and hit the cancel button. wait for the pump to stop. Hope this helps! Mike ... Whirlpool Dishwashers

I have a whirlpool quiet partner 1 dishwasher. I ran a load and it worked fine, after the load finished the clean light keeps blinking and I cant do anything but cancle/drain. Is there something I can try to fix it?


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012This is the first thing I'd try, based on your description. On your control panel...If you press these buttons in sequence with the door closed it should reset the error code and you can run anot ... Whirlpool GU2400XTP Built-in Dishwasher

I just replaced the heating element and it was working fine for about a week. Yesterday, the soak and scour light (which I've never even used) started blinking constantly. The dishwasher, Model GU2400XTPB3, won't let me even enter the reset code. I need to know if it's something we can fix without paying for another part/service by finding a manual. Thank you.


... Whirlpool Dishwashers

I purchased a second hand Electrolux Dishlex DX403 with a kitchen. The dishwasher turns on when I turn the powerpoint on and makes a noise as if it is about to start. I attempt to press the buttons to set a mode and start it and it wont work, the buttons dont do anything. How can I fix this?


... Electrolux 24 in. EDW5505EPS Stainless Steel Built-in Dishwasher

The red s light is on and dishwasher wont drain.. any ideas how to fix?


... Beko Dishwashers

Our dishwasher won't start. When I press the buttons, they don't light up. Is this something I can fix myself? Thank you!


A common issue with kitchen aid dishwashers i have come across is the thermal fuse. it is located above the control board inside the door. Take the screws along the inner edge of the door to access the board. Make sure to disconnect the power or shut ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

My kenmore dishwasher quiet guard is stuck on cleaning cycle! the lights dont seem to change and all it does is clean and wont drain! what can i do?


... Dishwashers

OUR HOTPOINT AQUARIUS FDL570 DISHWASHER WONT DRAIN 4 LIGHTS WERE FLASHING .WE DONT KNOW WHERE THE WATER INLET FILTER IS TO TAKE OFF AND CLEAN,IS IT INSIDE OR OUT


... Dishwashers

Whirlpool dishwasher model DUB700XB has quit cycling. Fills with water but will not start wash cycle. Making intermittent humming noise unless the door is open to disengage the switch, even when on stop. No LEDs lighting when rotating the dial through the various cycles. Unit is old and wondering if it's better to buy a new one rather than fix this and have something else go wrong in the not to distant future. Thanks in advance


... Dishwashers

Telmann dishwasher We have just moved into a new house with a Telmann TEL12DWMS dishwasher. The dishwasher will light up but wont start. Power and Rinse cycle lights light up but when you turn the dial it wont start. Any suggestions? Thank you


... Dishwashers

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

Electrolux dishwasher all lights blinking and wont turn on push start button either all lights flash or normal light stays on  either case the dishwasher wont run a cycle


Remove the toe kick by loosening 2 screws. There is a panel there with little lights that correspond to specific problems. The light that is on will correspond to the problem that the dishwasher has detected. Correct the problem and you should be goo ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2388 seconds