Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

Model KUDY24SEBL5 latch is broken. Am I dreaming to think I can replace it myself with the proper part? I am not very handy.


Answers :

Hi,
\015\012No it is not that hard and most anyone can do it....the part is like 9,95 plus shipping here...
\015\012
\015\012http://www.repairclinic.com/Appliance-Parts?s=t-KUDY24SEBL5-%3d%3d&n=5
\015\012
\015\012It is at the very bottom of the page...
\015\012Good Luck!! You can do it!!
\015\012
\015\012heatman101
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Model KUDY24SEBL5 latch is broken. Am I dreaming to think I can replace it myself with the proper part? I am not very handy.


Hi,\015\012No it is not that hard and most anyone can do it....the part is like 9,95 plus shipping here...\015\012\015\012 ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

On 2/18/09, I had a part replaced (due to a recent recall issue) on our Bosch dishwasher, SHU43C06UC. I had not had any problems with my dishwasher - ever - and, since the replacement, my dishes are not being properly cleaned. The Sears repairman who replaced the part tells me that the part he replaced has nothing to do with my present issue and, because my DW is no longer under warranty, I would have to pay for any further services he may provide. 1) What do I need to do to troubleshoot this di


Http://www.boschappliances.com/safetyrecall/dishwasher/default.aspx?pid=BCH0905OIQ001 ... Bosch 24 in. SHU43 Built-in Dishwasher

Handle Replacement How do you replace the "latch" handle on the latch assembly?? I have both of the parts but there is no way of installing the handle on the latch assembly. Thank You


You can see a video of this very repair being done on your dishwasher here: http://thatsawesome.tv/?p=44 ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I have a Maytag MDBH 965AWW Dishwasher. I replaced the latch assmembly because the handle had cracked. I replaced it with Part w10130697 from Johnstone Supply. Now when I power the dishwasher up I


... Dishwashers

The water dispenser inside the unit doesn't seem to be rotating properly and I am not getting a proper water flow during the wash cycle. can I repair this error myself or will it require a professional? is there a part replacement available from the company?


The water level should come just below the heater. Also check your spray arms and make sure the holes in them are not plugged. Remove the bottom spray arm and check to make sure mineral deposits such as calcium and llime are not built up and blocking ... Dishwashers

LG - LDF7811ST Dishwasher will not turn on at all. I have replaced the main PCB board and checked all wires for shorts. The PCB board does have 120Vac to the board. I have also checked the latch and it does close the switch when the dishwasher is closed. I think it may be the main switch/power button board but can't seem to find the part number or alternate part numbers that can be used.


Hi. The likely culprit will be the power switch. The part number for this switch is 5020ED3011A.NOTE_ Make sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for po ... Dishwashers

My Viking DFUD042 dishwasher soap dispenser release is broken. The soap dispenser does not close. Can I replace only the latch or do I have to replace the entire soap dispenser? Where can I get the parts? Thanks, Robbie


You will need to replace the entire soap disp. You can find it at marcone.com w/ your model # ... Viking DFUD042 Built-in Dishwasher

The dispenser on a Maytag Dishwasher Model WU502 is not working properly. Is there a way to clean it or does it need to be replaced? Since it is an old model can the part be replaced and if so do I need a specialist to do it?


... Maytag Dishwashers

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

When I first contacted you, I couldn't get the soap door to close in my dishwasher. As suggested I got the part. I now have the door apart. When I work the soap latch I can't see what closes the door. The part I was going to replace seems to be working correctly. over


Well IF the piece, the latch, seems to be working OK, then the only other thing it can be, is the Electronic "Drive" from the controller board, or a disconnection between the Controller and the Latch, Sometimes it can be a "Sensor" not allowing the ... Dishwashers

My dishwasher, a Whirlpool DWF B10, is not cleaning properly. When the cycle has finished, there is always a block of undissolved dishwasher tablet/powder left behind. My guess is that the seal to the powder door has gone and allowing the tablet to get wet too early and part dissolve before the door opens - is this likely to be right? If so, can I get a replacement seal or do I have to replace the whole powder & rinse aid containers ??


... Whirlpool Dishwashers

I am working on a d8 dishwasher and found the cycle timer (49 sec/ 11 sec) faulty. Ordered a replacement timer from russell food equipment. The new timer is different mounting and timer motor specs. Can you tell me if this timer is the proper replacement. New part number cpn14480


... Dishwashers

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

Dishwasher model KUDP02CRBL3. Door latch pops open during cleaning cycles. I had a repairman replace the plastic part of the latch but it did not make a difference.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

The door latch appears to be loose, and consequently the dishwasher door will not latch. how hard is it to replace that part?


... Frigidaire 24 in. FDB421RF Built-in Dishwasher

I have replaced the latch on my F&P DW920 however I have to replace the top internal one to ensure it closes properly so I removed the old one but the new one won't screw back into place. Are there internal nuts that I have lost and how do I recover them?


... Fisher Dishwashers

Need to replace the latch assembly on Maytag dishwasher model # MDB5600AWW. How do I gain access to the area where I need to replace the part? I removed the 5 screws at the top, but can't seem to get the upper front panel off. I'm afraid of pulling on it to hard.


Remove all the screws on the inner door panel and lift it up it will be easyer ... Dishwashers

The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.


I've posted this before. The latch just needs a good cleaning. In the past, something placed in the washer kept the door from opening properly, which caused detergent to dry under the latch. This has happen several times until I figured it out. Don't ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Model#lds5811bb--started making noise coming from the water inlet area(bottom left). 3/4's of the way through the cycle, noise became louder and then an error code "le" came on. We tried turning breaker off, then we tried in the rinse only cycle, but 5 minutes into it the "le" code error came on again. I'm fairly handy, so I'm not sure what part I can replace to maybe solve the problem. I can't afford to spend a couple of hundred dollars for a repair man to fix it. I'll appreciate any suggestion


The LE code is a locked motor code. Something may have gotten into the pump impeller. I would take the screens and filters off and clean the and check the pump for something stuck in it. It could also be the motor going bad but I would check the obvi ... LG Dishwashers

Bosch model SHU9915UC dish whasher water feed will not turn off. Need to know if control can be repaired or replaced? Part number, where can I order one, can I change it myself, I am handy.


Hello,Welcome to FixYa. ... Bosch SHU9915UC Dishwasher

I need a parts manual for MDBH955AWS. The door latch is broken and needs replaced.


Go to appliancepartspros.com . there you will find a parts search engine to properly identify and possibly order the parts needed ... Maytag MDBH955AWS Stainless Steel 24 in. Built-in Dishwasher

Hi i have a technika bellissimo dishwasher and the cutlery basket has perished, i need to find a replacement. Also, the powder, tablet dispenser does not close or open properly so i need to just put the tablet straight in the dishwasher is there a spare part for this? many thanks!


Make sure the top drawer is fully pushed in when closing the dishwasher - that fixed the dispenser problem for us ... Dishwashers

The Frigidaire dishwasher #FDB658RAC1 door latch is broken. Can the part be replaced; does the door come apart easily?


... Frigidaire Dishwashers

Dishwasher mdc4650aww door latch very hard to open, replacement part


If the door latch mechanism is the only problem, (Meaning: although the door may be hard to open, it otherwise still works) you may only need to replace the latch and handle. The part number is 99003347 for the latch, and W10130694 for the handle. Y ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0888 seconds