Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

I'm having a similar issue with a unit that I purchased from Best Buy a few weeks ago. I'm not sure of the model number as it was a display unit and they didn't give me the proper user manual, but it looks just like the unit pictured in this post. I've uploaded a video of the issue to YouTube : http://www.youtube.com/watch?v=uCx8DzY-Iv0 The first time we hooked it up, it ran for about an hour before shutting off and becoming completely unresponsive. None of the buttons would light up. We repl


Answers :

Watched the youtube video about the problem with your dishwasher. The thing that I am unclear is who replaced the thermal fuse and the control board? Not sure how this was done without knowing the actual model number. Is it possible to clarify this please.
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I'm having a similar issue with a unit that I purchased from Best Buy a few weeks ago. I'm not sure of the model number as it was a display unit and they didn't give me the proper user manual, but it looks just like the unit pictured in this post. I've uploaded a video of the issue to YouTube : http://www.youtube.com/watch?v=uCx8DzY-Iv0 The first time we hooked it up, it ran for about an hour before shutting off and becoming completely unresponsive. None of the buttons would light up. We repl


Watched the youtube video about the problem with your dishwasher. The thing that I am unclear is who replaced the thermal fuse and the control board? Not sure how this was done without knowing the actual model number. Is it possible to clarify this ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My dishwasher is dripping quarter size drops of water right underneath the unit. I ran it last night and when I woke up water was all over the floor. The only thing was that I used a different soap for the first time. Suds were still in the unit. I'm running it now with the old soap and it's just dripping a few drops at a time.


Bottom door seal needs replaced. ... Dishwashers

Dishwasher drain is hooked to a food disposer and until recently the unit worked fine. Last week following a cycle a couple of inches of water did not drain out. All food is removed from dishes, silverware, etc. prior to loading and the food trap in the bottom is completely clear. I ran the unit empty through a Lightwash cycle and afterwards the water level (that which didn't drain out) looked to be the same as before. The dishwasher is run 2-3 times weekly whereas the food disposal is


Hi, The I don't think the problem is with the loop and the 32" above the floor.If the dish washer was removed from one house to another, did *********** ever have a dish washer in the house before that he replaced this one with? The reason I am aski ... Dishwashers

Dishwasher problems Hi. I have been having issues with my dishwasher the last month or so. There is a white powder-like residue left on dishes. I noticed it most on my silverware. At first I thought the detergent didn't rinse off completely so I did a ran it again without any detergent a couple of times. Still there. I bought some stuff that is supposed to remove build up from hard water. did that twice. Increased the amount in the rinse aid dispenser. Now I have noticed that the drying coil? is


I've been reading a lot lately about cleaning your dishwasher on a tight budget if indeed you want it working properly as well as clean properly. It is suggested to use ONE Kool-Aid Packet, Lemonade ONLY, and insert that into your wash dispenser to l ... Dishwashers

I have a new Frigidaire FDB1050RE diswasher. I ran it for the first time set on normal wash and pressing both the Hi-temp wash and heat dry button. This cycle is supposed to take a total of 89 minutes to complete including the drying cycle. After 89 minutes it was still in the wash cycle so I cancelled it to preserve sanity. In the instruction manual it states that the water temperature must be above 120°F. Our building's water heating unit is set at 110°F. Why there is a lower temperature


It should still work pretty well but you probably can't use the high temp wash because it will take too long for the dishwasher to heat up the water enough to satisfy the high temp washer thermostat. If the thermostat's calibrated closing temperature ... Frigidaire Dishwashers

We have run our dish washer several times, however, the dishes are not getting cleaned. We first ran it on "normal wash." The second and third time we ran it on "pots and pans." Not only are the dishes not getting cleaned, but the soap is hardly getting dissolved. We use liquid dish soap too. I noticed this last time, at the end of the wash, the soap was getting built up on the front-right (when facing the machine) and had turned into a solid clump; almost like plaster. I don't have a manual so


First idea goto your local home depot they make a product called AFFRESH for front load washing machines and dishwashers run this tablet inside your dishwasher with no dishes on the inside on the hotest setting this usually takes out all build up wit ... Dishwashers

Magic Chef DU55CA-01 unit runs but when pump kicks on for discharge cyle water leaks on the floor from the what appears to be the solenoid part. The leaking stops as soon as the pump turns off. What part needs to be replaced? The unit was in storage for some time would this just be an issue with it sitting for some time? What is the best way to determine the real cause of the leak?


Leaking from drain valve shaft seal. If you just replace the seal it may still leak. Replacing the pump is a lot of work and not really worth it to cure a small leak. ... Magic Chef 24 in. DU6550 Built-in Dishwasher

Unit shuts off on first try, always works the second time.


Dear Sir:you have 2 options:1) The board can be faulty, tight any connector, loose wire, break, or burn. see if some component is heated. 2) The start button can be dirty , or stuck, clean with special spray contact cleaner.3) Test th ... Whirlpool GU2400XTP Built-in Dishwasher

Engine will not start,almost sounds like it is backfireing out of the carburater ,I cleaned out the old gass and put new in, cleaned gas lines,blew out carb with air two times, it ran for about 10 seconds the first time, and nothing the second time,----------What !


Pour a large amount of carb cleaner into the gas tank\015\012With choke on full, pull cord often to work carb cleaner into carb and then let it sit for a day or four.\015\012Your carb is dirty for sure.\015\012The venturi and jets a ... Honda Pressure Washer PSI 3000

First 2 weeks ago i put an electric control module into the upper section. what comes on is the green flashing light for clean. in checking connections i found the paper for trouble shouting. i did what they said to do. they said hit the time saver - high temp - time saver - high temp. from there all the lights went on & the wash cycle started and ran. then it just stopped & the green light for clean just flashes. the water is still in the bottom & won't drain.


The error indicates that the machine has taken too long to drain the water. Do the following.\015\012 \015\012\015\012Switch off the machine, unplug or disconnect the ma ... Kenmore 16874 Built-in Dishwasher

First we had drain issue with Bosch Integra® 500 SHX55M05UC Built-in Dishwasher ECO cycle. It stopped after a while. I thought it may be because last cycle might not be finished well. When we ran again ECO cycle with no drain issues but cycle did not finished as it used to be. I am sure because cycle countdown were not zero and because infra red light was off which is sing of complete cycle.


... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

Won start Was using the pressure washer 1st time this year and started on the second pull. Ran out of gas shut-off also noticed it needed oil. Believe, I put too much oil so, I drained some and added gas. At first, there was no resistant in the pull so waited an hour and tried again. This time the resistant was there on the pull but still would not start; no attempt even to turn over. It's been a couple of days...changed the spark plug although, hardware guy said nothing was wrong with it..still


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

I have a Miele Dishwasher 2430 Sci. It's been not used for 5 months and when I returned it worked fine for several times (at least 6). NOW the intake/drain light keeps blinking. I have already cleaned out the drain and replaced it properly (there was nothing in there and it was clean). No water is coming into the dishwasher?however I know that the water hook-up is on (the first thing I checked). I turned the water on and off several times and AM SURE it's on now. What else could be


The usual course of events is to check and clean the filter, check and clean the water pump and well, check and clean the waste pipe and any connection to a sink or waste disposal system, then check the inlet warer pressure, then the machine level / ... Miele G2430SCi Dishwasher

The dishwasher sat for 4 weeks in our basement while we remodeled our kitchen. When we ran it for the first time, the soap is just driping down the door..either it isn't opening at the right time, or the water isn't spraying where the soap is opening on the door. HELP


Two things will cause this problem ,1low water pressure to the machine.2blocked pipes check all filters and run the hotest tempture wash on the machine also put two tablets in the hot wash it should be ok.adrian;;;;; ... Kenmore 24 in. 15079 Built-in Dishwasher

Just installed bosch SHE68E15UC dishwasher today and during first cycle E15 error came up and unit will not go into another cycle or allow me to program anything else - sanitize and rinse aid lights are blinking - water went into the machine and it started filling the bottom and wasnt draining - i then adjusted the filter and the water drained - but e15 error persists - what should i do - is it install issue or machine issue - please help- thank you so much


... Dishwashers

I just purchased a whirlpool dishwasher DU1055xtvs. ran for three hours for the first time. Is his normal running time?


No check warranty ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

I have a Dewalt 3800 pressure washer fitted with a 67DX39G11 pump. Started unit up for the first this year, has pressure for 15 seconds then nothing. Water is flowing through okay, everything seems in order but no pressure. Unit is 2 years old but has only 15 hours of total running time. I think the pump has failed, is it normal for a pump to fail with only 15 hours on the clock?


... Dewalt 3800 PSI Pressure Washer

Dishwasher Fault Hi, My dishwasher is a Diplomat ADP8322 (which i think is a rebadged whirlpool unit) & has been playing up recently. When you start a cycle it is fine for a minute or so then it starts beeping, the rinse light comes on & the light next to the start button flashes 11 times, pauses then repeats. I have read online that this flashing relates to what the fault is, but i cannot find out what fault the 11 flashes relate to. The first time this happened i cleaned out all of the filters


... Dishwashers

Water stays in the top draw filter area, have checked hoses found good connection and no kinks in the lines , could this be a pump motor problem. I have had a problem the first month with this unit and the tech. replaced a lot of parts including the computer for the top draw . i am now out of warr. time not by much and am starting to get upset that this problem is happening after such a short time.


... Fisher and Paykel DS605I Built-in Dishwasher

Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Kitchen Aid Dishwasher KUDR24SEBLO does not drain 100%. I have removed the drain hose and chcked the sink P-Trap, [it drains thru the garbage disposer]. Unit is 10 years old, otherwise works fine. I am having difficulty removing the impeller and items above the pump to see if it is clogged. Do you think I have a partially clogged pump or a timer issue that prevents the pump from completely emptying the bottom of the dishwasher? We have run the dishwasher 20-30 times since observing the problem.


Hi there,\012Please check out the following -Pump - Your dishwasher pump ejects the water. The pump is usually mounted directly to the motor, then attached to the bottom of the dishwasher. You can reach the pu ... KitchenAid Dishwashers

Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the softener. Recently [a few weeks later] the glasses have all come out cloudy, something that never happened before. Also, the cutlery has whitish marks on it which are impossible to remove. I would love some help on this. Many thanks, Terry


Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have help ... Dishwashers

I have a PLD3460RDC1 dishwasher.The power got shut off and it now displays an ER message with all the other lights blinking.I have shut off the power to the unit many times, first getting a PF error and then it goes to the ER with all lights blinking. How can I reset this?


HI, there has been a power surge/pulse, that has been absorbed by the electronic control board. There may be serious damaged here, in this case. You can try to reset the main logic chips by unplugging, or shutting power down for five minutes. If the ... Frigidaire Dishwashers

Flashes that there is a heating problem. Reset and used 3 times and then "heat" issue returned...now unit will not do anything unless I do the reset proceedure. is there a high limit or something easy to find?


If you have selected "heat" with the wash cycle, then heat should be activated at the proper time during the cycle. If not, you could have an issue with a defective heat element or thermostat. If the heat element and thermostat are fine, then your ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Craftsman model 580.752020 electric pressure washer. First time I used it worked for about three minutes then the motor stopped. I cannot get it to start again. Plugged into a 15 amp gfi circuit which did not trip. The light on the plug is red as per instructions. Unit is beyond warrenty. What to do?


Turn off water and machine electrics.remove high pressure hose from front of machine, this may be tight if there is still pressure in the system.turn on water, when water comes out of machine hose outlet turn on machine. does the ma ... Electric Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0727 seconds