Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

I was installing a thermal cutoff, one of the wires came loose from the thermal block while i was reattaching the panel and cause a spark. Now there is no power from those leads. Is there anything else that could have shorted out in the dishwasher?


Answers :

Hi,
\012Check the control board... if your lucky the board has a fuse in it that blew... if not then the board is fried...
\012
\012heatman101
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was installing a thermal cutoff, one of the wires came loose from the thermal block while i was reattaching the panel and cause a spark. Now there is no power from those leads. Is there anything else that could have shorted out in the dishwasher?


Hi,\012Check the control board... if your lucky the board has a fuse in it that blew... if not then the board is fried...\012\012heatman101 ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

See below This is a post that I just copied to this space "I have a whirlpool Quiet Partner II, Model GU2400XTB1, that just suddenly will not start, as if the power was cut. Circuit breaker is fine. from the little Internet research I've done it looks as thou it could be a thermal fuse problem. How easy are these to replace, assuming that's what it is?" Mine is quiet partner III ... there is power to the connection box at the dishwasher it self (checked w/ light tester) ... but there is no power


Have you tryed leaving the power cord out of the socket for an hour or so sometimes they don't lose the memory until they have been left disconnected for a while ... Whirlpool GU2400XTP Built-in Dishwasher

Belling Dishwasher IDW450. When turn on power button it starts bleeping. About 25 times. The you can select your program, it sounds like it is draining but then doesnt do anything else. Cant hear any water running in. I have turned the power off and back on. Water is connected


When you say you have turned the power off and back on. do you mean the switch on the appliance. if so turn off the power by removing the fuse from the fuse panel for the dishwasher. wait about ten minutes, put the fuse back in and see if that res ... Belling 24 in. IDW603 Built-in Dishwasher

Leaking dishwasher I have traced my leak to the outside top of my dishwasher. I think it may be at the upper arm. Could it be anything else and what do I need to do to repair it? Thanks for your help. Evelyn


... Kenmore 24 in. 16534 Built-in Dishwasher

When trying to start the dishwasher, pressing the Normal wash button, the dishwasher gives a huge clunk and then it trips the circuit breaker. Upon resetting the breaker, I tried the next button over, which is Soak and Wash, and it seems to go thru the cycle fine. Another time I tried the Normal button, but put the left dial on Rinse and it started up, but it would clunk periodically and it seemed to have a 'hot' smell. I'm worried to use it - what could this be? Is there anything else I can try


Hi\015\012\015\012This is a very dangerous situation you must remove from the wall supply and desist from using, such a fault could easily make the casing "Live" and anyone touching it may be killed. You need to discover why this is happe ... Dishwashers

My kenmore 587.1516 dishwasher has a constant blinking "sani rinse". It will not run at all, before I could push other buttons and it would run. I have disconnect the power for a few seconds in the hope it would reset, but no luck. Is there anything I could do to solve this problem?


... Kenmore Dishwashers

Neff dishwasher has power but no light on. Won't work. Loud bang heard during cycle then stopped. Had panels off and pump works when float switch is lifted. Could this be capacitor at lower back where power lead comes in ?


... Neff 24 in. S5443X2 Built-in Dishwasher

I have a Dishlex Global 300 dishwasher that stopped working mid-cycle. I had to sponge out all the water. Now none of the buttons do anything and none of the lights come on. When I turn it on at the power outlet it gives a single beep, but I cant get it to do anything else. I've opened it up and there is no water or dampness anywhere inside. Any ideas?


It is your control board inside your dishwasher. ... Dishwashers

We have a kitchen aid dishwasher model # kudso1msso -- quit working and the control panel button lights are out so i assume there is no power to control panel. we have power at the plug every else looks ok. . could the internal fuse at the control panel be blown or the circuit board blown.


Sounds to me like a 'breaker' must be thrown; ... KitchenAid Dishwashers

Own a Frigidaire Dishwasher Model Number FDB4315LFSO and now after about 2 years suddenly the display will not light and function anything. Without pulling the power panel off the whole line circuit seems to have power as they have my disposal unit tied into same electric line and that runs and so does everything else and no breaker is tripped. Is their a reset somewhere to check or any ideas what can casue the display panel not to function any commands at all. Nick


... Dishwashers

My Kenmore dishwasher leaked out through the door and into the kitchen. It appears it is not draining and once the water reaches a certain level, pushes out the door. It did this before and we thought maybe the drain was clogged, but couldn't see anything. Ran it again and was fine but has now done it again. Could this be the control module or the overfill control, or something else?


\012\012Hi,\012Here\012is a tip that I wrote that will help you with your dishwasher not\012draining problem...Dishwasher Problems - ... Kenmore Dishwashers

I have a diplomat slimline ADP 8352 dishwasher which has just stopped working - the light comes on to show there is power to the machine but wont do anything else. Thank you for your help


... Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher

Blowing fuse when I conect my dishwasher to a power socket the fuse in the plug explodes. Is there anything I could check before calling a repair person out or is this likely to be a problem for a proffesional?


What exactly happened to your machine, before facing this problem? ... Hotpoint 24 in. DF55 Free-standing Dishwasher

Whirlpool Dishwaser Model #DU8000XX5. Dishwasher won't do anything. Almost as if not getting any power. Was told to check thermal fuse. Noticed some burning around suspected fuse. Ordered new one, but new one doesn't look like old one. Old has 4 connections, new one only has 2. What gives?


... Dishwashers

I just bought the Kenmore Ultra Wash Dishwasher model # 665.1389. It worked about 4 times then before the it finished it lost power while it was running. Now it won't turn back on at all. I done everything in the trouble shooting manual and nothing worked. It's not the circuit breaker either. Everything else on the same breaker works fine. What could it be?


... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

Dishwasher suddenly stopped working. doesn't do anything when you push the buttons. the lights don't come on. It's as if there's no power but nothing has changed in the kitchen. everything else works fine.,


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?


Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers

Beko d2731fw the dishwasher is just sitting on the drain cycle , the selector isnt changing anything , could this be the timer or something else.


Anti -flood could of activated? now just set to drain , need to disconnect power and pull machine out and tip it back to see if any water is sitting at base of the unit, please remember to put towels under and around the base to catch any such water? ... Dishwashers

Maytag Dishwasher WU482 had a big puddle of water in front of it tonight. Other than the door gasket, is there anything else that could be wrong?


A pluged or should i say a partially pluged lower spray arm nozzle redirecting the water spray under the door causing it to spray water in a direction it shouldn't be, causing your leak.another spray arm could again have a partially pluged spra ... Maytag 24 in. PDB1420 Built-in Dishwasher

Quit mid cycle - no apparent power issue - house breaker OK - Outlet OK - Will not do anything - Checked the one fuse I could find in the control panel area - it tested OK. Is there another fuse/breaker in the dishwasher that may be the issue?


There may be a thermal fuse in the rear of the machine. If the door switch is faulty (which is common) then the machine won't do anything either. You can test the power from the power inverter to the control board with an ohmmeter to see if there is ... Whirlpool Gold GU2475XTV Builtin Dishwasher

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Hello, My Kenmore elite dishwasher model 665.17282.400 seems to have a problem. The CLEAN light is flashing and can't do anything else with it. Do you know what thew problem is, or how to reset it. I tried cotting off the power to the unit but to no avail. Please help ASAP


Try pressing the heated wash then heated dry one after the other about 5 times. this should reset the unit.\015\012\015\012\015\012--------\015\012in some machines there is "Hi temp scrub " and "air dry" so press this ... Kenmore 24 in. 17282 Built-in Dishwasher

No power to dishwaser, won't start. I checked fusebox, not the problem. I want to know if there is a fuse somewhere in the dishwasher, I looked and could not see anything, also manual is no help.


You could try checking the door latch/switch. if it is burnt and not engaging, the machine may not start and will appear to have no power. i don't know the color of the machine, the letters after the LC will help with this, however maybe this brea ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

My dishwasher quit running in the middle of it cycle like there is no power going to it..... there is water standing in the bottom of it and i cant get the washer to come on or anything.... could it be something simple????


It is simple to repair. you need a thermal fuse. take the control panel off and right where the control board is you will see the thermal fuse. you can either replace it or just splice the wires. let me know if you need further help ... Kenmore 18 in. 14432 / 14439 Built-in Dishwasher

I have a Bosch Dishwasher about 10 years old, model SHV4803UC/U07. Yesterday it stopped working along with no lights on the selector buttons. I have reset the circuit breaker ( which did seem to not be off at any rate). It seem not to be getting any power if it's not the circuit breaker what else could cause this?


... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1636 seconds