Having problems with your KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher ?

My kitchenaid dishwasher takes upto 3 hours to do a single load, what could be wrong?


Answers :

Analyze what portion of the cycle is consuming the time. If it is the water fill portions, you probably have a plugged filter in the valve assembly.
\015\012
\015\012If it is excessive wash time, the timer probably is at fault.
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My kitchenaid dishwasher takes upto 3 hours to do a single load, what could be wrong?


Analyze what portion of the cycle is consuming the time. If it is the water fill portions, you probably have a plugged filter in the valve assembly.\015\012\015\012If it is excessive wash time, the timer probably is at fault. ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

We have just replaced our 11 year old KitchenAid dishwasher with a new one as shown below. It takes over two hours to wash a light load. Is this normal and if so is there another KitchenAid unit that does not take this long?


Run hot water at sink near dishwasher that will help shorten time some ka. dishwasher heat the water make a long run time ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

I have purchased a house with the single door dishwasher and it takes forever to wash - about two hours - what could be the problem?


Normal cycle is approx 2 hours. Fast cycle is approx 55 mins. You can download the user manual from the Fisher and Paykel website www.fisherpaykel.com.au, click on "customer care", then "Find a User Guide". \015\012The user manual has a lot of u ... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher

Frigidaire FDB520RHB Dishwashers : We bought this dishwasher about 3 months ago. Today I ran the washer before I left to do errands and when I returned, I believe the washer had finished its cycle. But about an hour later, I noticed it had started up on its own? It then proceeded to run for almost 3 hours before my husband canceled the cycle. We were kind of waiting to see if it would stop on its own, which is why we let it go so long. I think it usually takes about 1 1/2-2 hours to wash. Could


Try to run the dishwasher on a short cycle like rinse and see if it finishes the cycle.It is likely the heater or hot water temperature is not reaching the desired level and this could cause the extended wash cycle. Feel water temperature ins ... Dishwashers

Zanussi dishwasher My dishwasher takes up to four hours on a cycle which is supposed to take Eighty minutes..what is wrong ?


Chances are you either have a broken heater element or programmer as the washer is not moving itself on correctly ... Dishwashers

Dishwasher takes about 24-36 hours....yes hours....to complete the cycle because it stops....for sometimes more than an hour and then starts again on its own. When it stops the green light blinks. No explanation in the manual for a blinking green light. It will eventually complete the cycle, but who has two days to do a load of dishes?


... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

My Bosch dishwasher has several problems: 1) Water doesn't completely drain out and dishwasher kind-of smells when I open it -- I do keep the filter very clean. 2) The dishwasher takes HOURS to go through one load, no matter what the time says on the display and no matter what type of cycle you choose -- quick, delicate or regular. 3) The red display often displays something that looks like "2h" at the beginning of the cycle. 4) The place where you put the detergent doesn't shut.


Hi Kathryn .I think you have a defective pressure switch. The pressure switch is located near to the drain pump, and the device is used to determine when water had been drained completely.Also check the floater switch located ... Dishwashers

Kitchenaid Dishwasher (KUDM01TJ) replaced thermal fuse, blew out again after two loads, could there be a larger problem?


... Dishwashers

Hello, We need some assistance with our Kenmore dishwasher. Last night after I started a load, the dishwasher just stopped and then the washing and drying lights started flashing red, sanitized and green are flashing green and the 6 hour delay button is flashing red. I have pushed the start/cancel button but to no avail. My husband shut the power from it to see if it would reboot, it does not help either. It runs a little bit then quits and does not clean the dishes. Could you give us sugg


Hold the start button for 3-4 seconds and see what that does ... Dishwashers

My Siemens dishwasher takes 4+ hours to complete a cycle. The inlet water supply has been always COLD, which means that the dishwasher always managed to heat the water properly. What could be happening now?


... Siemens 24 in. SE53200 Built-In Dishwasher

My Bosch dishwasher is taking hours (at least 3 - maybe more) to complete a cycle. There is gummy, yucky stuff building up inside - sorta pinkish brownish. Could the water not be hot enough? A couple of months ago we installed an on-demand hot water heater and I wonder if that could have anythig to do with it. I've tried running the hot water in the sink first but that doesn't help. Any ideas


If your on demand heater is one of the small ones that mounts under the sink, it will not flow enough water to fill your dishwasher. the dishwasher is waiting for the water level to fill before it starts washing. your bosch will heat its own wat ... Bosch SHX46A07UC Built-in Dishwasher

Brand new dishwasher, installed last week. When it is done there is quite a lot of water standing in the bottom of the tub. It has only been run 2 times since installed and both times several inches of water were left standing. Is this something we could check or do I need to have the installer come back, which will probably take a week at least. Oh-KitchenAid #KUDC031VWH


First was a new garbage disposal also installed? There is a knockout on the garbage disposal where the drain hose connects to.\015\012If that is not the problem make sure it has the correct high loop or also called air gap. If that is not right ... KitchenAid KUDC03IVWH Builtin Dishwasher

My dishwasher takes about 6-8 hours to do a load,is this a fixable problem?


... Zanussi 24 in. DE6544 Built-in Dishwasher

My tecnik inter-grated dishwasher with code SE6 TIE2GB/70 is taking forever to finish a cycle over 4 hours and there is always dirty water left in the bottom of machine? Please advise what this could be.


Have your heating element tested ............also check the filter.. ... Tecnik Dishwashers

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? thanks


Water is getting on the wiring somewhere, take it apart right after a cycle and see if you have a door leak, or the motor is going bad ... Whirlpool DU1055XTS Built-in Dishwasher

I use Cascade Complete detergent and Jet Dry rinsing agent in my Kitchenaide. Every load leaves a white residue in my dishwasher and on every dish as well. The rinsing aid compartment doesn't show "empty" very quickly, could that matter ? Hope you can help. Thanks!


Hi, \015\012 I would try the new detergent packs with the rinse aid right in them to see what happens then....\015\012I have an older dishwasher also and recently my wife also complained about it not c ... KitchenAid Dishwashers

My bosch dishwasher takes 3 hours to run. It does not seem to get hot. The dishes are not dry when I open it the next morning. What might be wrong and how do I fix it?


... Bosch 23 in. SHU33A Built-In Dishwasher

My dishwasher takes 2.5 hours to run, what's wrong with it?


Check user guide. Check the program you have switched. Two hours or little more is OK. But check your inlet water flow to the machine. If it is slow then also you will get this delay. ... Kenmore 15762 Dishwasher

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? It's 2 years old, i have already replaced the heating element, the main control board, and now the thermal....twice.


Hi.If the thermal fuse is blowing, that means that there is overheating.Common causes for overheating are:Thermostat cutting off too late.Plugged element.Plugged element means that the element sta ... Whirlpool Dishwashers

KitchenAid KUDP01DLBS2 dishwasher. Runs for a very long time on any cycle; time does not seem to advance. (takes 2.5 hours or more for normal cycle. "sensing soak", "water heating" lights on for a long time, even though it appears that water is not being heated. Checked incoming water temp, is hot. Did not do this when new, something has changed. Typical cycle was 1 hr 10 min. before.


Sounds like the heater inside the dishwasher is not working. The machine is trying to get the water up to a preset temperature, probably in the neighborhood of 140 degrees. That is one of the things that it is sensing.After the machine fi ... Dishwashers

Dishes and the dishwasher look dirty after they run, like it redistributed dirty water. The door is very dirty/filmy except right under the soap dispenser, like someone squirted dirty water on it but wiped right under the soap dispenser. If I run it a second time with vinegar it gets clean, but that is crazy, esp since it takes 2 1/2 hours a load. I have 2 of them and both are doing it. I have changed soaps, added more soap, used less soap, pre-rinsed dishes, put them in filthy, used jet-dry, no


Hi Mike_wend604,\015\012\015\012I am looking for a used Asko #1504, if you would like to sell yours please e-mail me at [email protected] and put "Asko" in the ... Dishwashers

Frigidaire/electolux dishwasher..model number..fdb1050rec2....does it have an inline filter or screen? only had for 2 years...takes over an hour to wash a load...wondering if there is restriction


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My Whirlpool dishwasher takes two hours to wash, not including the dry cycle. what is wrong with it?


There is nothing wrong with the unit if it is a electroniclly control unit they are programmed to run for up to 2hours or a little longer. ... Dishwashers

I have a couple of problems. Firstly, the auto programme now shows a cycle time of 199mins but actually takes much longer than that to complete - more like 4 hours. On the quick (!) wash cycle the time is 97 minutes, whereas it should be less than 30 mins. Second problem, the detergent box flap won't stay shut when loading, so I have to put the tablet in loose in the bottom. Could the 2 problems be related?


There is an issue with the machine not heating properly, it could be the control panel or the thermostat, The flap not staying shut is not connected to this. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2520 seconds