Having problems with your KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher ?

Nothing lights up. seems like no electricity. checked breaker in breaker box, not tripped.


Answers :

Hi.

If possible use an extension to test the appliance on a different main socket , or test the socket using a different device. In any case check power cord connection.

If main is OK replace the BI-METAL fuse. Click the blue link to get the part page. Cost of spare is $23. The part can be tested reading Ohms with a multimeter. If the bimetal is good it will read low or zero impedance, if it is gone it will read open.

If replacing the bi metal does not help, then you will need to test power cord and control assembly, reading volts (or Ohms) on different parts. In that case you may need to call a technician by ringing the service number listed on the use and care manual.

Part is nr 6 on diagram below, click on diagram to enlarge:

671eafa.gif

Here all parts and diagrams for your appliance.
Hi,
\015\012
\015\012The problem is the control panel. You may have to shut the power off for a few seconds to reset the control board, then check to see if it works. If not, the control board has a break in the wiring or the keypad is no good. Look at the control circuit board and recheck for any broken wire…
\015\012
\015\012Let us know if you have something more to know else accept the suggestion.
\015\012Thank You for contacting Fixya.com
\015\012
\015\012
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Nothing lights up. seems like no electricity. checked breaker in breaker box, not tripped.


Hi.If possible use an extension to test the appliance on a different main socket , or test the socket using a different device. In any case check power cord connection.If main is OK replace the ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

No lights no sounds no nothing like it is unplugged but it is hard wired in and the the breaker is not tripped


... Haier ESD310 24 in. Dishwasher

My Kenmore Dishwasher won't turn on. Was working fine last week, but when I went to start it yesterday, nothing starts or lights up when I push the button. The options buttons still light up, but thats it, the wash cycles and the start and stop buttons...nothing happens. I tried tripping the breaker to reset and it did no good.


Hi,\015\012\015\012A device may cease to function or operate sporadically if the electrical cord is damaged. Inspect the cord for any damage. Check whether there are any black smudges or burn marks on the outlet, cord or anywhere the cord comes ... Kenmore 15129 Built-in Dishwasher

I see the questions and follow-up comments on this site but not the answers that led to the comments! My 665 Quick Rinse light is blinking and pressing it does nothing, nor does pressing any of the other buttons. I turned off the power at the breaker box; power back on - blinking light still.


A light will blink on the control in the manner that you describe when a button is stuck. The Quick Rinse light blinking indicates that the Quick Rinse button is apparently stuck. The control will not respond with this type of stuck button. The contr ... Kenmore 24 in. 15932 Built-in Dishwasher

Dishwasher model# FGHD2433KBI. washer was purchesed mid July, used 4 times. I just put in some dirty dish's and closed the door. A couple minutes later the washer turned on. No lights were on. After a few minutes I pushed the cancel button. Nothing happened. I opened the door and it sounded like a sucking sound and the pump stopped. No water in unit. I closed the door it started again. I cut the power at the circut box. Waited a few minutes and turned power back on. Power failure light came on.


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

My dish washer just stopped working, no power no lights no nothing. it is plugged in and the circuit breaker is not tripped the wires for to the plug are tight and i didnt find an loose wires, the gfc plug is not tripped either, any suggestions?


This machine has no power, and i would suspect a broken wire but you say the trip did not trip,have you got a voltage tester?if so set to x1k or until when you touch both points it workes.with the plug in hand put one point on the right plug ter and ... GE 24 in. GSD3630Z Built-in Dishwasher

Frigidaire FPHD2491 electronic buttons not working. Only China/Crystal cycle will light up and can be selected. All others do nothing. I checked the control lock and it does nothing. seems like the electronics are messed up or something. I turned power off and back on through the breaker and it made no difference.


Hello bamspry - From what you are describing if only the China/Crystal icon is working, then the dishwasher could possibly be experiencing a communication problem coming from the main control panel or wiring failure. If I was in your position, I p ... Frigidaire FPHD2491K Builtin Dishwasher

MDBH945AWW maytag dishwasher panel lights will not light up. checked breaker and was not tripped. Hardwired circuit. will check tomorrow to be sure power gets to dishwasher. Suspect have panel control failure. In which case should I box it up for the local dump.


These control boards do not have fuses on them. I opened mine up when the front panel touch pad stopped working and the LED indicators were anemic. This is a sign of the ribbon cable connections have oxidized. The ribbon cable connects the touch p ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

My dishwasher ran this morning with no problems. This evening it won't work at all. No lights come on at all, as if there is no power. I checked the circuit breaker box and all is well there. I flipped the breaker just to double check, but nothing. Sadly, I cannot find my instruction manual. Do you have any ideas?


The manual is no problem you can download it from this site.\015\012The problem you are experiencing will not be described in ... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Wash cycle stopped with water in the bottom. Seems like there is no power. Can't get lights on cycles buttons to turn on. Power button does nothing. Checked circuit breakers. All are on. Lights and outlets around dishwasher area are working.


Check the wiring in the units junction box. Its located at the bottom right corner. You will likely find melted connectors. If so, you need to cut the wires back and replace these connectors. Make sure you turn the power off before doing any of this ... Bosch 24 in. SHX46A05UC Built-In Dishwasher

Ge dishwasher model gld5560l00ss --when you hit start nothing happens - if you hit start again , light on any selected switch begins to blink. have tried rebooting control that was suggested in owners manual by tripping breaker and then resetting after 30 seconds, ( this did not change anything). machine makes no noise but lights do come on.


... GE Dishwashers

Starting the dishwaser on NORMAL and HEAT Dry (the lights go on) I hit the START/RESUME and nothing happens. Breaker box is good.


... KitchenAid 24 in. KUDS02FR Built-in Dishwasher

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed. Model #SHU5314UC/U06 FD#8001


Test the door switch. It can be faulty or misaligned. You can also check the back of the unit and/or remove the rear panel and take a look at the thermal fuse. It may be bad not allowing enough current flow to operate the machine. ... Bosch SHU5316UC Dishwasher

My dishwasher just stopped running in cycle like there is no power to it. I have tried to rerun it but the controls will not respond or even light up. I,ve already checked the breaker box in the house. Serial number mdb6759aws3


Hello,\012Everyone\012expects their dishwasher will work correctly. They can become\012nonchalant about it until one day it does not function. Sometimes the\012dishwasher doesn't drain as expected. Most people immediately call ... Maytag Dishwashers

Hello, Our kitchenaid DW has stopped working. Non of the buttons cause a any of the lights to turn on. Of course, it will not start. On its last working cycle, it had a very strange washing cycle. It almost sounds like the water was not splashing around (even though I opened it while it was working and noticed water at the bottom). I checked the circuit breaker, and it is not tripped. For a couple of weeks, the DW had started making a kind of metallic noise while in the washing cycle. Also,


It is nice to see a problem described with such a depth of observations. It helps in closing on to the possible causes of the problem.\015\012\015\012For the moment let us make sure there are no remnants of the glass left in the dishwashe ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My dishwasher's buttons will not work at all. Nothing is lighting up. I have already checked the breaker (not tripped, but I turned it off and then on again just to rule that out)... I assume that it is some control panel (the manufacturer said that it is a covered part... but I will have to pay the tech to come and install). Just trying to determine if it would be something that I can do myself and save some $. the unit is only 3.5 years old...


... KitchenAid Architect? II U SERIES KUDS03ST Stainless Steel Built-in Dishwasher

Just had a Bosch dishwasher installed in my new kitchen. The plumber who installed it ran it and it worked. Now we cannot get it to run. We have tried everything. Restarted several times, turned the circuit breaker off and on, changed the cycle and nothing works. The light comes on but it does not get water or run. What are we doing wrong. The dishwasher is brand new out of box but we bought it 4 years ago and remodeling was delayed.


Do you have the manual?What is the exact model #?Thanks~! ... Dishwashers

My dishwasher will not start. It is a frigidaire / electrolux FDB1050REQ. I have checked thepower....and reset the circuit breaker.......then pushed the start button.....the light comes on on the front of the washer like normal but no water starts filling. I have jiggled the anti water overfill device but still nothing. HELP!!! The front of the dishwasher says Frigidaire, however, the inside of the door where the model# is says Electrolux


... Frigidaire Dishwashers

Got a Frigidaire model FDB750RCS0. Now it was running for a couple of min then I hear a clicking sound. Thought it might be something hitting the propeller. I opened the door and nothing. Closed it and now it wont even work. Thought the breaker got tripped but not even that. Now when I had it set back to the cancel part, the Clean Light comes on very dim where as before it use to be bright. Any solutions?


... Frigidaire 24 in. FDB750RC Slim-Line Built-In Dishwasher

Kenmore dishwasher model #665.16039401 no lights, no power, breaker is not tripped? Any suggestions? There is some water in the bottom of the dishwasher, like it stopped mid cycle?


... Kenmore 24 in. 16039 Built-in Dishwasher

I fill dishwasher and add tablet then go to press on button and nothing happens. Unit plugged in. Breaker not tripped. Tested socket and its good. I did fiddle with it a bit and the light did come on for a few seconds but then back off. What next?


... Whirlpool 24 in. DU927QWD Built-in Dishwasher

Hi, I have a KitchenAidDishwasher (Model KUDP01FL). It's worked well for a few years. Yesterday, when we went to turn it on, none of the lights on the buttons were on. WE can't turn it on at all. The fuse box looks fine, nothing is tripped. Any ideas?


Kill the power to the unit. Pull the control panel down to access the control board located on the right hand side of the panel. There will be 2 wires coming in to a white plastic clip on fuse located on the side of the control board. It will have a ... Dishwashers

No lights on LED panel on Superba KitchenAid dishwasher. It's dead. The breaker box is o.k. - nothing in the off position.


... KitchenAid Dishwashers

Same problem! Stopped mid cycle, no power, no lights, nothing. Checked fuse box breakers fine. Bought it a year and a half ago! piece of SH#$! Its a Kenmore now its a $350 drying rack. please help!


Sounds like the main control board needs to e replaced this is the most likely problem ... Kenmore 15129 Built-in Dishwasher

Cannot get Maytag Jetclean Dishwasher-Quiet Plus will not start at all. Push the buttons and get nothing. The circuit breaker is not tripped. Is there a reset button or something like that.


... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0919 seconds