Having problems with your KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher ?

Whirlpool dishwasher will not turn on . Only the cancel/drain will work. Please advise I would like to repair it myself if possible.


Answers :

Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dishwasher will not turn on . Only the cancel/drain will work. Please advise I would like to repair it myself if possible.


... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Hi, please help. I have a Electrolux Visi dishwasher, previously it worked like a charm, now howver the water does not seem to get hot nor does it dry my dishes. Could you perhaps provide some advise of possible causes. Kate


... Electrolux Dishwashers

Hi I went to put my Bosch dishwasher on this morning only to find that it would not come on . there was water in the bottom of the dishwasher so i cleaned all the water out and cleaned all the filters but my dishwasher would still not work it was only when i went t o disconnect the dishwasher from the water supply did it come on Can you please let me know what problem i have with my dishwasher and is it likely to happen again


Hello,\015\012\015\012This video will help you fix your ouch dishwasher.\015\012\015\012 ... Bosch Dishwashers

My dishwasher makes the sound like it wants to start but doesn't. I had this problem about 4 years ago but the repair man would not allow me to see what he did. It took him all of 30 seconds to do something under the front of the dishwasher. I do not have the money to call the repair man again. Please help. I have a ge dishwasher.


You my have allowed your dishwasher to sit for a while. The seals in the motor and the pump can get frozen. Sometimes high minerals in the water can stick the seals together not allowing the motor to run and it hums.\015\012\015\012 ... GE 24 in. GSD4320Z Built-in Dishwasher

It appears that water is not running through the dishwasher or that the sprayers are not working correctly. There doesn't appear to be a clog. However, I did find a round rubber "washer" (I think that is what they are called) laying in the bottom of the dishwasher - where does this part go. It was working fine until this wash. The heating element works fine but like I said it appears that something may be wrong with the spray tower. Please advise Model number of Hotpoint: HDA3420Z01BB T


Hi,\012When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher ... Hotpoint Dishwashers

Portable Dishwasher I have a older model portable dishwasher. It works great and until it goes out I would like to keep it. I am wondering how or what I will need to make the dishwasher a non-portable. I get so tired of moving it across the kitchen floor. Is there anyway I can hook something up to my lines underneath the sink so it will stay where it is? it is only about 10 ft away from my sink but that it alot of moving around when it is full of dishes. Please help. [email protected]


I sent you and email with some instructions, Look to hear from you soon!! ... Kenmore 17252 Free-standing Dishwasher

Have had this dishwasher for 5 years, has never been effective at cleaning dishes. I can completely wash the dishes, and they will come out of the dishwasher with stuff stuck to them. I can't figure out why?? I had it looked at by a repair guy, and he said it is working properly. If I use any cycle other than China Crystal the dishes are dirtier than ever. Please advise.


\015\012\015\012\015\012Check the water temperature. Should be 125 to 140 F.\015\012\015\012Check pump re-circulation., Listen, see if it sounds like it is spraying the water arou ... Whirlpool Dishwashers

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary


Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

Samsung DMR77LHS Tall Tub Dishwasher displays HE code (flashing) and does not finish the cycle. I am very handy and would like to repair this myself. so as much detail as possible is appreciated.


EE1/HE/HE1\015\012The EE and HE codes refer to temperature errors. The EE1 designation refers to a thermistor issue, and the HE codes refer to heater problems. These are all functional errors that require a certified service technici ... Samsung DMR77LHS Tall Tub Dishwasher

Please advise how I can safely remove the water and energy rating labels from from my Dishlex DX103 dishwasher,without damage to the paint surface. The labels are stuck firmly and can not possibly be peeled off.I would very much appreciate your help. Thank you, Heather Jenkinson


Hello Heather,\015\012Most labels can be removed with isopropal alcohol without affecting the painted surface.. Try a small amount on a clean cloth to verify that it doesn't 'cut' the paint.. ..but that should work for you.. ... Electrolux Dishwashers

My SB908WL Westinghouse dishwasher is tripping the switch when it goes to pump out the water. What are the likely problems and solutions please! If anyone has some expertise that would be great. (I have recently checked the soldering on the main panel and touched one point up, the rest are fine it seems). The element is working as there is hot water in the unit. We have small kids so maybe something is jammed in there? How do I get access to check. All input helpful. Thanks!


... Dishwashers

Hi I have a dishwasher Maytag Model No DWU 7400 BAE and Serial Number is : 26294990 MK I would like have Get a user Guide for that. Is it possible to send it to me in french or in english ? My email is : [email protected] amd my adress is : Mourad Mlih 35 Micheline Gatineau (Qu?bec) J8T3G2 could you please send me the phone number of the support service. Thank you.


... Maytag Dishwashers

Hi There. My 25 year old Miele G527 dishwasher works very well but now 5min or so after completeing it's cycle it trips the earth leakage detector. Any idea what is causing this? Is it a component like a capacitor that is pre the on/off switch? Please advise. Regards Owen


... Dishwashers

I have the Fridgeadair Dishwasher FDB1502RGS model. It worked fine for several months but now it does not clean or rinse the dishes properly. It does not get hot any more. It used to be that when you open the door after washing is done it was hot and steam would come out. Now it is cold when you open the door. Please advise what the problem might be.


... Frigidaire FDB1502RGS Built-in Dishwasher

My dishwasher KUDi01IL is having trouble with the electronics...only the cancel button will work. The other buttons are no longer lit, but occasionally I can get the "normal" wash button to light..however, the machine will not start. Called technical support last night, tried unplugging and plugging back in due to possible power surge or storms....it did not help. Please advise.


Hi,As we are not there, we can make some intelligent guess. This is a common problem in Dishwasher.There might be million of reasons for the same and to be frank you would agree. Let me put down some main reasons which i have found ;- ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Jenn-air dishwasher is not working the pad where the wash cycle u would like has everything it up including the lock button but it does not lock or go on please help


... Dishwashers

WE have a LG dishwasher model LD-14AW3. It recently stopped working properly and stopped draining the water. WE called our dishwasher repair man in and he said he thought it would need a new board and we would be better off to discard the dishwasher.I took the dishwasher downstairs to discard but left it there for awhile as I still had reservations about it. I took it in and hooked it up again it worked very well doing the whole cycle. We brought the dishwasher back up into its place and it con


Hello, welcome to FixYa.\015\012\015\012The OE code is designed to indicate an overfill error, however there has been a revision made on these dishwashers since they can often incorrectly display the error. I doubt if there is anything very serious w ... LG Dishwashers

Hi there I purchased a Simpson Riviera 966 Dishwasher about 10 years ago and was very happy with it. All of a sudden water was flooding the kitchen from somewhere under the dishwasher, and not having the money to repair it at the time, it has just been sitting, and possibly the seals may need replacing. All electronic funtions seem OK on it however. Would it be possible to give me a quote on repairing the dishwasher - I HATE washing up !!!! My name is Hartley Cowderoy, and I Live at 65 Rosemount


... Dishwashers

Whirlpool dishwasher The dishwasher works off and on. Every few days it stops going on altogether...only the cancel button goes on and the the dishwasher's timer says 2 minutes. Sometimes the air dry button works,but none of the other buttons work. The problem has been when the repair person comes out, it all of a sudden starts to work and so he can't diagnose the problem. I spoke with someone who said it sounds like with the touch pad or computer control board is bad. You don't seem to list my


THE TECH WHO CAME TO FIX MY DISHWASHER FROM Y=THIS EXACT PROBLEM TOLD ME THAT IT IS CAUSED BY THE WATER THAT TAKES TOO MUCH TIME TO GET WARM, SO YOU HAVE TO MAKE SURE THE WATER IS NOT GOING TO BE COLD BEFORE YOU TURN THE DISHWASHER ON. AS TO FIXING I ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Whirlpool dishwasher The dishwasher works off and on. Every few days it stops going on altogether...only the cancel button goes on and the the dishwasher's timer says 2 minutes. Sometimes the air dry button works,but none of the other buttons work. The problem has been when the repair person comes out, it all of a sudden starts to work and so he can't diagnose the problem. I spoke with someone who said it sounds like with the touch pad or computer control board is bad. You don't seem to list my


Hi there,\015\012\015\012your problem is intermittent and before you start replacing parts, i would recommend that you do these checks:\015\012\015\012unplug the dishwasher from the wall\015\012check the connection betwe ... Dishwashers

Wash motor My dishwasher was working fine but the timer went out. It has sat there for about 1 year and I have now replaced it. It now cycles through but no water ever comes out to wash. I had an different dishwasher that we use to have at a lake house that would sit there over the winter and all I had to do was reach underneath and spin the little finned wheel and it would work....is there something like this on a DRU141 model? I just have a hard time believing that it is that when everything w


When a dishwasher doesn't get used, the gunk under the float switch dries up. Get that thing moving again, and you'll be back in business! ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

I have been interacting with Daniel about my Dishwasher Smart Dispenser problem. The last thing he had to say to me was that I needed to replace my drain pump. Before doing this, I would like an explanation of why a new drain pump will solve my problem since my dishwasher is draining just fine...it is my Smart DIspenser that is clogged up and not working ?? See the discussion here: Dear go4t9ers, There is a new Comment for the I would like to run the Smart Dispenser Purge Solution on


Ok first this is the schematic for your entire machine http://www.s ... Dishwashers

My dishwasher (model #110763510) lets water go out from the door; I think the problem comes from the overfill protector because it is no more linked to the system: I can pull it out from the dishwasher. I would like to know if it easy to repair, easy access from under. If so, then I would order the piece and repair it myself. Thanks for your advice. Claude


Hello Claude. Yes. The best place to order parts is Sears Direct. Just go there, enter the model number and you get a great schematic showing every part, screw, etc. J. ... Kenmore Dishwashers

I have a Kenmore 665.1373 Ultra Wash dishwasher that will not work. In the past few weeks, it stopped mid-cycle, the the clean light began to flash. Sears sent out a technician who told us that the latch was not catching. He adjusted it, did something with a computer and the dishwasher worked for a couple of days. This time, it would not start a cycle, it would only show heated dry if you pushed the smart wash button and nothing if you press start. It looks like some of the lights are continuous


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Dishwasher would not work and clean light would blink seven times. Asked an expert and they said to hit saniwash and heated dry two times. This work for a couple of times but now the dishwasher acts like there is no electrical power goimg to it. I tested the power with a voltmeter and there is power going to the circuit board.


Normally this happens when the dishwasher electronic control does not detect a water temperature increase during the main wash cycle. The issue could be in the heater element, the thermostat or the wiring that is connected to those or on the electro ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2526 seconds