Having problems with your KitchenAid 24 in. KUDP02CR Built-in Dishwasher ?

Door continually pops open - KitchenAid 24 in. KUDP02CR Built-in Dishwasher


Answers :

You may have a problem with either the door latch assembly of the door switch. the part # for the door latch is 8193830 and the door switch is 8269209. i have attached a breakdown showing where the parts are located. hope this helps.250
Part of the latch is probably bent, or damaged. If nothing appears to have broken off of the door side, then the cabinet side must be removed for repair or replacement.
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Door continually pops open - KitchenAid 24 in. KUDP02CR Built-in Dishwasher


You may have a problem with either the door latch assembly of the door switch. the part # for the door latch is 8193830 and the door switch is 8269209. i have attached a breakdown showing where the parts are located. hope this helps. ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

KitchenAid Dishwasher Door Pops open during cycle


The problem seems to be the loosening of the screws that hold the interior stainless steel skin to the door frame--not the latch. \015\012\015\012With the door in the open position you should find a total of twelve screws (5 on each side ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

KitchenAid Dishwasher KUDP02CR door pops open


... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

We have a kitchenaid KUDP01FLSS6 built in dishwasher, and the door pops open several times during a cycle. Is this something that can be repaired or is it just a common problem? Thanks!


You should adjust the spring tension on the door. There are 3 settings. Move it to a lower number to tighten the spring. Be sure to adjust both sides of the door to the same setting. ... Dishwashers

Door will not open - KitchenAid 24 in. KUDP02CR Built-in Dishwasher


\015\012Hi,\015\012\015\012You can reset the control use this key dance within 5 seconds press: HEATED DRY, NORMAL, HEATED DRY, NORMAL . ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a GE Quiet Power 3 built in dishwasher. With 1 min. left in a cycle, I opened the door, removed an item, then closed the door again, but it didn't finish the cycle. The machine continued its single beeps to indicate the door was open. Reopened and closed the door. None of the buttons on the control panel respond. Have unplugged and left overnight, plugged back in, beeping continues.


... GE 24 in. GLD6500L Built-in Dishwasher

Is there a way to have this dishwasher continue the wash cycle automatically after the door is opened? The kids always forget to press the start/resume button after opening the door during a wash cycle. This is for a KitchenAid KUDT03ST model dishwasher.


... KitchenAid Architect® Series II KUDT03ST Built-in Dishwasher

Kitchen Aid Dishwasher KUDS03ST We built our house and had this dishwasher sitting in the box for almost 2 yrs before finally using it. After finally installing it I find that occasionally the door to the soap does not open for washing as I find out when the dishes are supposed to be clean and I open the door to hear the soap then pop out of the dispenser. How do I fix this problem?


I have seen a lot of dishwashers that have this problem if they have a flip open lid for the soap .. often its caused by the top adjustable tray blocking the soap door from opening .. i put a camera inside to figure out what was happening ..in some ... KitchenAid Architect? II U SERIES KUDS03ST Stainless Steel Built-in Dishwasher

Soap dipenser My whirlpool built-in dishwasher model DU930PWPB0 serial # FR4104078. The door to the soap dispenser will not open. I have been washing the dishes with the door open all the time. When I close it(door) it won't pop open when it should. to dispense the soap in the wash cycle.


Try this... Wipe out the soap dish with white vinegar and a soft cloth.. make sure you get everything off the edges of the door and look for any nicks, blemishes or deformation of the dispenser door to make sure it is not mechanically binding up when ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Kitchenaid dishwasher model kuds01fl door pops open - it appears the latch is not keeping it closed while the diswasher is operating. We push and hold it closed and it stays for a time and then pops open again - any ideas on how to fix it?? Thanks,


... KitchenAid Dishwashers

Kitchenaidmodel # kudp01flss2 kitchenaid dishwasher door pops open at cycle start when water in ?


... KitchenAid Dishwashers

The door randomly pops open on my KitchenAid Dishwasher Superba Model# KUD501FLSS5 while in operation. How do I fix it?


... KitchenAid Kitchen Aid Superba Series Dishwasher Used Kuds011jbt0

Dishwasher door latch stuck. wont open - KitchenAid KUDM03FT 24 in. Built-in Dishwasher


... KitchenAid KUDM03FT 24 in. Built-in Dishwasher

Dishwasher door won't open - KitchenAid 24 in. KUDM25SH Built-in Dishwasher


Hello. here is the solution to your problem. The answer is quite lengthy so I will provide you with the link to it. ht ... KitchenAid 24 in. KUDM25SH Built-in Dishwasher

Kitchen aid dishwasher door falls open - KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Maytag MDBH965AWQ I have a Maytag dishwasher model number MDBH965AWQ. A few weeks ago the clean and sanitized lights would not go off after the door had been left open for over 30 seconds. Then last week, the diswasher would shut off in mid cycle and all lights would turn off with water still in the dishwasher. Today, I noticed that I am able to open the dishwasher door while the dishwasher is running and it will continue to run like the door was never opened. Now it is starting to trip the brea


2 items in need of testing are the door switch - and the main controller board/timer unit.CLIC ... Maytag 24 in. MDBH965AW Built-in Dishwasher

KitchenAid KUDS01FLSS Built-In Dishwasher; no door tension.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Have Whirlpool dishwasher Gold Series, Model GU9805CGB1 which stops part way through wash cycle with the led indicator blinks on the normal cycle.....if we ope nthe door and shut ...it continues until part way through rinse cycle...stops again....led indicator blinks again.....we open the door & shut and it continues....but then continues to run through the normal wash cycle continuously.....until we open the door again.....what's wrong???


Sounds like the door is losing contact with the door switch, first thing i would check is the door strike.Metal strike plate located on the tub itself that the door latch catches as it closes. its a spring metal striker, i would try bending it down ... Dishwashers

Door spring failed. need part # - KitchenAid 24 in. KUDP02CR Built-in Dishwasher


If the model number is correct, there are several parts on the door that can affect the spring. Parts you may require include:\015\012\015\012Door Balance Mount (part #8270021)\015\012Door Balance Wheel (part #8194001)\015\01 ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Door pops open during cycle - GE 24 in. GSD3400G Built-in Dishwasher


... GE 24 in. GSD3400G Built-in Dishwasher

Hi. I have a Siemens SE65E331GB Built in Dishwasher with an aquastop system. The problem is that it seems to be stuck at the end of a cycle. The pump is constantly running when stitched on. I won't top after a reset and it continues to run even if you open the door. The water supply light also comes on indicating that there is no water getting to the machine. I have tried resetting the aquastop as per the advice in other threads. This has helped in that the water supply light now stays


... Siemens Dishwashers

Soap door not opening - KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher


U need a new dispenser assembly.....u kind find the part at searpartsdirect.com by entering ur model number which is inside on the tag, to replace it u must turn off power at breaker, open door and remove screws around door to seperate dooors and rep ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door squeals when it is opened or closed - KitchenAid KUDA03CT Built-in Dishwasher


... KitchenAid KUDA03CT Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2382 seconds