Having problems with your KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher ?

Door broke door comes crashing down, nylon rope broke. where can I get parts and how to fix it


Answers :

Pick up some nylon rope (same diameter or slightly larger) at any home store such as Home Depot, Lowes etc.. Need to attach the original plastic ends to your new nylon rope as well as to the door spring and then re-install on the bottom side of the door. Hopefully the other rope for the door assist is still intact so you can use that side as a guide as to how to route it around the pulley. Make sure that you lube the new rope up with some Vaseline etc. My door was squeaking very bad. Seems that the rope dries out over time which could have possibly caused your to snap. Pretty bad when your $1200 dishwasher door uses a length of small diameter rope to keep your door loaded with sensitive electronic boards from crashing to the floor!!!
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Door broke door comes crashing down, nylon rope broke. where can I get parts and how to fix it


Pick up some nylon rope (same diameter or slightly larger) at any home store such as Home Depot, Lowes etc.. Need to attach the original plastic ends to your new nylon rope as well as to the door spring and then re-install on the bottom side of the d ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Hello, My built-in Jenn-Air JDB5900AWB dishwasher door has lost it's springs and comes crashing open. I am pretty handy and would like to try to fix this myself, is it possible? I have a great parts store here that the plumbers use (I was the only person there who wasn't a professional that day!). Where can I see instructions to fix this? Thanks, Miss Fix It


Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... Dishwashers

When the door is closed tight, the plate warmer cycle comes on and repeats over and over. a technician came out and said he had to order a part that costs over $100. Can we fix this ourself or get the part cheaper?


Did the tech tell you what the part was called? ... Haier ESD311 24 in. Built-in Dishwasher

The springs in the door broke. Where can I get the parts and can I fix it myself?


You can get replacement springs at an appliance parts store or on line. Remove the bottom front panes to get to the connection points for the springs on the door at the sides and on the bottom frame. ... Dishwashers

I have the part to fix my dishwasher. The handle broke. I do not want to take the door apart and not get it back the way it should be


Dishwasher not draining where is the filter located ... Jenn-Air Dishwashers

The door would not shut. We checked all around and nothing was blocking the door from shutting. We determined the latch on the door was not releasing. I forced the door shut. The touchpad works...lights come on but unit will not operate. The release handle on the front just wiggles back and forth without effect. Lowes says it is one of three parts...none returnable. Any thoughts on what part and whether this is something average consumer can self fix? Thanks.


Hi,\015\012 Lowes is right regarding the parts needed.\015\012\015\012First check the strike part is ok - that's on the body of the machine not the door.\015\012\015\012Unplug the machine.\015\012\015\012Remo ... Whirlpool DU1055XTS Built-in Dishwasher

Leaking from the dryer vent on base of door during wash cycle. I know I have water coming down through the dryer vent in the door. I guess it works like a thermostat in a car and opens when it gets hot, but it leaks cold. Can I get that part?


Before try to repair, gather the model and serial number from the unit and contact LG support line. There was a recall on early versions of the (energy saving) condensing drying cycle and specifically most of the components in the door.I ... LG LDS4821ST Stainless Steel 24 in. Built-in Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Door spring rope broke on door , door falls when opened like to fix it need part and diagram of unit


Http://www.bosch-eshop.com - enter the correct model number: SHE43P05UC in the search box on the right side, select which dishwasher you have from the results list. Click on the ... Bosch Dishwashers

Whirlpool ADG993, door fault: Hi, a few weeks ago soemthing broke on the door to my diswasher and it falls open wide with no stopping half way as usual. That was fine as the machine could still work, but now the door won't close. All seems fine until you get all but closed and then the door raises slightly from the bottom right corner, preventing it from closing. It looks like something may be jammed in there which pushes the door up at the last minute. There's a man coming out on Friday,


... Whirlpool Dishwashers

I have a jenn air dishwasher (floating glass door). The top cap of the door ($5 black plastic strip) broke and I need to replace it. Do you have instructions on how to take the door apart to get to the part?


... Jenn-Air 24 in. JDB1080AW Built-in Dishwasher

I believe there are counter weights on the main door that allow you to open the door a few inches. Mine will only open the the full [down] open position. What typically goes wrong and how do I fix it? Also there is a streak of sopa leading from the rinse aid fill location. Where do I look to find parts. One of the plastic spacers on the handle broke.


Most of my exprience has been that there is a pully/spring arrangement for the door tension. You'll have to pull your D/W out far enough to see and adjust.\015\012Regards, --W/D-- ... LG Dishwashers

The door hinge on my hotpoint dishwasher BF1620 has come unhooked and has jammed so i cant fully shut the door now. How would I find out which part is broken and is it fairly easy to fix a hinge yourself. Thanks


... Dishwashers

I have a Philco dishwasher Svelta DWN17 which works well but has lost its spring or counterweight for the door. The door now drops open when not locked for washing. I am having difficulty finding a servicing firm for this machine and would try to fix it myself if I could find a part and get some details on how to go about it. Can you help, please? Alan Wright


... Dishwashers

My KitchenAid dishwasher's door tension broke. The door falls to the floor now. The model # is KUDIO1FLSS6. What part number do I need and can I fix this myself?


... KitchenAid Dishwashers

My Equator door hinge broke to. Where can I get parts for the little PLS602S? I ordered a door for it once before about six years ago. But do not still have the information on the place where I ordered it.


... Equator 20 in. PLS602 Free-Standing Dishwasher

Hello, I have a Craftsman Clean N Carry® 2150 psi Gas Pressure Washer w/4.0 hp Briggs and Stratton Engine. My problem is that I can't get any water to come out of the nozzel. What can I check to fix the problem? Also, where can I get a book to look at for parts and problems?


... Pressure Washers

The door of our Eurotech Dishwasher EDW 254 E when opened and released just suddenly "drops" down uncontrolled. Apparently the "spring" the right lower corner broke. Also, it does only poor, unacceptably thorough cleaning job now. Will you please dispatch a repair person or suggest names and addresses / tel. nos. / e-mail addresses of repair persons / shops that can fix it. If spare parts are needed please indicate the source(s) for them. Possibly send us via e-mail a copy of the manual for t


Hi.Problem is likely the door hinge springs, hinges, stoppers or other part comprised in the door hinge assembly.See parts B ... EuroTech 23 in. EDW254E Built-in Dishwasher

I'm having problems with the drain pump constantly running. I understand so far that it'll be the anti-flood device that is causing this. I've taken the dishwasher out and tipped it backwards to drain as much water out as possible but nothing comes out from anywhere ! It appears to be a sealed unit so how do I get to the appropriate part and fix it ? Cheers !


... Neff 24 in. S5453X1 Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

The door spring on my Kenmore Limited edition 8542516 broke what part do I need and how do I fix it


Door springs usually don't "break" they iether get stretched over time or come off their mount...\015\012\015\012springs are adjustable and can sometimes be set to a tighter tension without pulling the unit out but that may be necessary.. ... Kenmore Dishwashers

My Maytag MDB9150AWS is no longer working due to what I believe is a electrical fire in the front control panel as there was smoke coming out of the top of the front panel. There were no flames but the smell took your breath away. We had to open the Kitchen windows and door for several hours to try to get rid of the smell, but you can still smell it by the dishwasher. This model is not part of the recall. Has anyone else had a similar problem with this model?


My dishwasher (same make and model) had a similar problem except I did see some sparks coming out from th front on the side of it (on Thanksgiving Day no less - a lot of manual diswahing followed). What the problem ultimatly was is what I believe to ... Dishwashers

I have a maytag quietseries 200 dishwasher. The door handle seems to be broken. Can this be fixed or does it have to be replaced and where would I get the part?


It can be fixed, and very likely by YOU.\015\012Examine the handle and see if you can remove it- always a good exercise prior to the following: \015\012Collect the model and serial number from the unit, and find an actual "appliance parts ... Maytag Dishwashers

KitchenAid KUDS01FL - door spring tensioner snapped - how do I fix / get parts?


Replaced the tension spring cords. The plastic portion of the cords had broken. I think this is desined to fail since it is such light plastic. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door just drops open. I guess that a spring broke. Do I need to call a serviceman to come? Can I order the part and ask my superintendent to repair it?


You should be able to do it yourself if you can slide it out from the cabinet. Post your model number ... Maytag 24 in. MDBH940AWS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1680 seconds