Having problems with your KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher ?

The door to my Kitchenaid dishwasher lost a spring. It will fall to the 100% open position. When you close it, the spring does not help it back up. Where is the spring? How do I get a diagram to see how to fix this? thanks.


Answers :

The springs are located at the bottom of unit one on left and one on the right remove bottom cover and they are above the side railing...sometimes there is not enough room to access from the bottom and you actually have to pull unit out a few inches to gain access... as far as parts
\012www.apdepot.com
\012www.sears.com and hit the parts direct link on top
\012both sites will allow you to enter your model number and a parts diagram will come up for you to look at parts diagram and check availability of parts
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The door to my Kitchenaid dishwasher lost a spring. It will fall to the 100% open position. When you close it, the spring does not help it back up. Where is the spring? How do I get a diagram to see how to fix this? thanks.


The springs are located at the bottom of unit one on left and one on the right remove bottom cover and they are above the side railing...sometimes there is not enough room to access from the bottom and you actually have to pull unit out a few inches ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Mod. mdc5100aww ser. 28126829ax purchase date dec. 02 i called the serviceman he said the sprayers are pluged. i'm on a fixed income. with food house payment medicine dr. bills. i can't afford to get it fixed. i tried to get the bottom sprayer off. i could not get it off. now i have it unsnapped & can't get it back together. if you can help me i would appreciate it!!!!!!


... Maytag Dishwashers

Hello, we have a Frigidaire dishwasher Model# FDB1250REC2. There was all kinds of junk down in the lower filter area and when I tried to remove the parts they all came out together and then fell apart. I need to see how the parts go back together, because I thought I had them in there correctly, but when I opened up the dishwasher after running it the water sprayer was laying on the heating element. Could you please help me get it back together right? Thank you


I am having the same problem...were you able to fix it? ... Frigidaire Dishwashers

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I have a brand new Miele dishwasher which has worked grate since it was installed 2 weeks ago. It keeps shutting itself off & indicates an F13 fault. I looked in the manual, see that water is going in fine & pressure is good. It then says to clean water intake filter. How do I get to that ? I don't have a user maintenance manual. I'm on city water & doubt that the filter is clogged but My wife will kill me if I don't get it fixed today. Can anyone help. Glenn


On my Miele 1220 dishwasher, the inlet filter is inside the inlet hose connector, where it screws onto the water supply. To clean it:\015\012\015\0121. Turn off the stopcock.\015\0122. Unscrew the inlet hose.\015\0123. Remove the black rubber s ... Dishwashers

I recently purchased a Dewalt DXPW 3835 Pressure Washer from Home Depot.... After 4 hours use I no longer get any pressure. After depressing the trigger, I get a second of pressure and then it just dies. I called DeWalt and they couldn't help and to take it to the Warranty Shop. They informed that they wouldn't be able to look at for 2 weeks so I took it back to HD and got a new one and this one does the same thing. I'm pretty sure it's probably a pretty quick fix but no one seems able to te


... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure

My dishwasher has no power so it won't turn on and I need help fixing it to get power back. Anyone know how? PLEASE HELP


First check the power at connection, bottom right, if you have power here, check the fuse ... Dishwasher Accessories

Our top rack is not getting cleaned at all-- although the rinser seems to spin freely when pushed, and fits correctly into the hole back. We were using powder detergent, and a little residue was always left in the compartment. So we tried liquid detergent, to see if it would help, and now it seems like almost none of the detergent is dissolving out, at all. The compartment's full and a goopy mess after each cycle. So now the bottom rack isn't very clean, either! Please advise. Thanks!


Welcome to FixYa,Based on your description... I`d suspect a plugged or really dirty wash pump. It could ultimately be a worn out wash impeller/chopper assembly, but I'd certainly try my suggestions before considering that. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Hi the dishwasher is leaking from the back of the machine, problem is I cannot get the machine out to see or fix the problem as i cannot unscrew the rear feet and dont want to pull too vigorously as i would break the feet. Any suggestions?


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

Hi, we have an aquarius hotpoint df61 and it goes through the cycle but does not drain out the last few inches of water and the wash is not as good as it should be, have unscrewed the plastic bit under the filter thing to see if there is a blockage there but nothing, have now taken off the top and side panel to try and get to the pump, currently on it's back but hard to access underneath and not sure how to remove the solid bottom of the dishwasher..please help!


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My top spray arm has come off AEG 24 in. Favorit 60870 Free-standing Dishwasher I cannot see how to get it back on can you help please


... AEG 24 in. Favorit 60870M Free-standing Dishwasher

Hi there My Bosch Exxcel Dishwasher is tripping out the fusebox RCD and I think there is an earthing problem. It will run for 3 or 4 minutes and then the house alarm goes off and the cooker clock needs resetting! I have tried to look in the back but don't know how to remove the panels. I've tried tipping it to 45 degrees to see if there is any water in the innards but non water came out. I have no idea what to look for - and no manual to help me get inside the beast! Thanks in advance.


It will probably be the water heater element is failing and shorting out.\015\012\015\012Be careful as you do not want to electrocute yourself ! ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

Upper spray arm and tube assembly. This part fell off the back wall. Can not figure out how to get it to stay on again. Looks like it should clip in, but nothing to snap it in place. The part does not look brocken when compared to the part would order to replace. No info in the manual and their service department was no help, How do I fix this.


Hi,\012Those p[arts wear and even though the parts do not look broken they are not up to the specs. of a new part...\012That is not that hard to fix and you can easily buy the parts yourself online... ... Bosch 23 in. SHU 8805 Built-in Dishwasher

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

Had problem with clean bilking light. I was able to reset with your help. But it keeps coming back after every cycle. Dishes are not drying as well. How can I fix this?


The flashing light indicates there is a heater issue caused by a failure of one or more of the following: (1) The heater. (2) Door switch. (3) Water high temperature limit switch. (4) Electronic control heater relay. (5) heater wire may have loosened ... Whirlpool Dishwashers

Mod m.d.c.5100aww ser28126829ax I had a repairman come out. He said the "sprayers" are plugged. I'm on a fixed income. With my bills I can't afford to get it fixed. Trying to fix it myself. I have the bottom sprayer unsnapped & can't get it back on. Thank you Don


Most dishwashers dispense the detergent via gravity and the sprayer\015\012arms spraying against the soap dispenser once the little door flips\015\012open during the wash cycle. Since it sounds like the soap door is\015\012opening I would look at the ... Dishwashers

I have a GE Triton XL dishwasher that all of the sudden stopped cleaning well. I now find food residue on the dishes, and the detergent cup does not empty completely. I use the gel detergent, and I just see the gel dripping down the door after the cycle is complete. This machine is about 5 years old, and I'm looking to see if it can be easily fix. I rather not have to call someone to tell me that I have to get a new one, or pay more to fix it that what it is worth. Thanks


Hi If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liqu ... GE Tritonr XL GSD6260JCC Dishwasher

I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This


In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers

Hi, my hotpoint aquarius df61 makes all the noises of washing, i hear the water going in, motor is running, however i dont believe the spray arms are revolving, so the dishes are not getting clean. i have cleaned the individual holes in the spray arms, but i don't think the water is getting up the back pipe and into the top spray arm. it does not spin at all. no problems draining. help please. and were can i get a copy of the user guide, free preferably. thanks


How old is your machine? it is posible to have something in the watwr pump, you hear the water and the motor, but the fan of the pump (washing pump) is blocket. also the pipes hat make connection to the water pump and the arms. at someoane i found gl ... Dishwashers

My dishwasher does not turn on. You folks helped me fix it a while back and now I need you help again. It is in theswitch that has to do with the handle to close the door. Could you help me to what I need to do again. Thanks Paul Straub


Hi\015\012 \015\012If you have a voltmeter you can check the door switch and replace if that has gone bad. You can also blow compressed air on the door switch or blow some air with the help of hair dryer so that if there is dust st ... GE Dishwashers

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

My bosch dishwasher wont dry. The model number is she44c02uc/47. I don't know what codes i need to see to get it to heat. I've tried to hold the cancel drain buttons in to change the code. I get a C1. what does that mean. Thanks for your help. john


... Bosch Dishwashers

How do I remove the main conduit on my GE Triton XL dishwasher? The cover inlet that traps food from going down the drain somehow came off and clogged up the drain. I got the drain cleared but cannot get the cover back on and need to move the main conduit (pipe connecting lower and upper arms) before I can get it on. Anyone know before I spend too much $ finding someone to fix it?


... GE Dishwashers

I have a G E Nautilus dishwasher that has been in storage for 2 years. Every thing works but the Drain. When the cycles are finished I' m left with a dishwasher full of water and it dont drain. I checked the bottom as u said in a previos question I see not obstacles, trash etc. How else4 can I get it to unplug? Also where can I get a owners manual? I can be contacted at [email protected] if needed. Thanks ahead of time for the help.


Hello. Here is the link to a free manual http://kitchen.manualsonline.com/manuals/mfg/ge_appliances/ge_ap ... Dishwashers

Where can I get a wiring diagram for for a Hobart Model #CL44E. The plate on the dishwasher said the wiring diagram is: F17927B. I calle Hobart but they said they couldn't help me.


... Hobart Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1477 seconds