Having problems with your KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher ?

No power at controls - KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher


Answers :

Hi.Scott.well no power at controls meaning totally dead right?1-check power supply and trip switches.could be as simple as bad connection ,fuse,or cut cable.internally u need a visual and tester.coul be the on/off switch or prog/pcb.hope this helps.ali
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No power at controls - KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher


Hi.Scott.well no power at controls meaning totally dead right?1-check power supply and trip switches.could be as simple as bad connection ,fuse,or cut cable.internally u need a visual and tester.coul be the on/off switch or prog/pcb.hope this helps.a ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

I own a KUDS01FLSS3 KitchenAid dishwasher. The lights on the control panel do not come on and a cycle can not be started. There is about an inch of water in the bottom of the dishwasher basin and it looks like the previous cycle did not complete. I have checked the wall outlet that the washer is plugged into and the washer is receiving power from the wall. And ideas? My next thought was to take the door off and check the power supply running to the door panel and control panel.


Servtek06 writes:\015\012check connections @ control board/module. May be Control Board/Module. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a KitchenAid dishwasher model KUDC10IXWH1 that has no control power. I have already verified that there is 120V at the control board. The unit kept the lights on after the cleaning cycle was done and I couldn't shut them off. I reset the electrical breaker and now nothing works, but the board has power. Please give any advice you might have. I was thinking of replacing the board, but I'm not sure if it is the board or the front control panel. Any way to tell?


... KitchenAid 24-in Built-In Dishwasher White ENERGY STAR KUDC10IXWH

KitchenAid Dishwasher Model #KUD535FX553 - KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

No power to kitchenaid dishwasher w10311123b - KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

RESET CONTROL UNIT ON KITCHENAID DISHWASHER - KitchenAid KUDR24SE Built-in Dishwasher


... KitchenAid KUDR24SE Built-in Dishwasher

No power to kitchenaid dishwasher kudi01ss - KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

Kitchenaid Dishwasher KUDS01FLSS6 Control Panel won't light up. NO power to dishwasher at all. Service man says it is a fuse. Could it also be control panel?


... KitchenAid Dishwashers

KitchenAid KUDS01FLSS Built-In Dishwasher; no door tension.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Kudc10fxss4 I have a KitchenAid KUDC10FXSS4 w/o any power. Circuit breaker is on, and it's getting power. But there are no lights on the display. I called a parts place to see if I could order a thermal cut off fuse. But the representative stated there is no fuse listed for this model. Any ideas on what would be causing a loss of power? Seems odd/wrong to me that there wouldn't be a fuse. If there is a fuse, would it be located in the door (the control is built into the door, such


... KitchenAid Dishwashers

Kitchenaid dishwasher after power outage states "Control Lock" model # KUD101ILWH5


... KitchenAid Dishwashers

I have a KitchenAid Whisper Quiet Dishwasher. Has been working fine. Circuit breaker seem to be working but control board is now not lighting up and buttons do not respond. Seems like no power to control board.


I may have leaked water into the mother board ciruitry. This can happen when there is a tiny leak or when steam gets in. Check with kitchenaid, that is a good product and kitchen aid will stand by thier equipment. ... KitchenAid Dishwashers

Kitchenaid kudc10ixwh control panel - KitchenAid Classic Series 24" Built-In Dishwasher KUDC10IXWH


... KitchenAid Classic Series 24" Built-In Dishwasher KUDC10IXWH

Dishwasher control panel is dead - KitchenAid KUDM24SE Built-in Dishwasher


First sounds sarcastic: Is the power on? Second: Check the door switch. Thrid: check the thermal fuse Fourth: Look at the circuit boards for burned spots. Fifth: Call for service. ... KitchenAid KUDM24SE Built-in Dishwasher

KitchenAid 24" KUDI01ILBL1 Stainless Steel Built-in Dishwasher All of the Control lights are flashing. I need the reset code to reset the control panel.


... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

My Kitchenaid dishwasher (model KUDS02SRSS0) keeps burning out my dispenser. First I replaced the dispenser, then I replaced the control board and dispenser, it worked for two weeks and now I have a melted solenoid again in my dispenser. I've measured voltage to the solenoid and it is getting 110V through the entire diagnostic cycle. This is wrong. It should only get power at some point during the cycle to open the dispenser. It appears the control board has failed again and in the same wa


HI. The relay that controls the voltage and timed release command, via logic chip, is indeed damaged(stuck on). This is a common theme with this particular design. The original control board was recently replaced with a substitution model ... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

KitchenAid Diswasher Model KUDS01FL no power - KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

Kitchenaid control locked - KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher


... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

My Kitchenaid dishwasher model KUDS01FLSS has a foul smell and I found black sludge built up at the bottom of the door. When I was cleaning it up, it seems as if there is a seal at the bottom of the


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

There is water on the bottom and no power - KitchenAid 24 in. KUDU02FR Built-in Dishwasher


Hi,It sounds like you lost power during a cycle. It is most likely the thermal fuse. Take a look at this link I put together it will explain the places you can loose power to a dishwasher but on this model I would suspect the ... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

How do i run diagnostic program? - KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

I have a KitchenAid KUDS02SR dishwasher. If I push any buttons on the control panel the Normal light starts flashing rapidly and will not stop no matter what I do. While this is happening it will not start a cycle. If I turn off the power the light will stop flashing, but when I push any other button the Normal light starts flashing again.


The touch panel may have a bad push pad and will not let it probram there is a tech sheet under the dw just behind the toe panel this wil help you understand the flashing code . it will tell you what is wrong . but a ... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

Control buttons are nonfunctioning - KitchenAid 24 in. KUDU02FR Built-in Dishwasher


... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

I have a Kitchenaid dishwasher, KUDP01FLSS5. Just now I used the normal wash and sani rinse cycle. The tub did not fully drain, and the lights on the buttons are unresponsive. I have power at the outlet, but nothing is happening at the controls. What can I do? I am an electrician, so if anything needs to be replaced let me know.


Hello. turn it off at the panel for two full minutes. that will reset it. Then push the drain button and hopesully it will respond.\015\012\015\012If not get back. Joe ... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

Maytag 300 no power after storm - KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher


Did you check the fuse panel in your house it may look to be on and may be tripped. try this first,if still no power must replace unit it's fried. ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1650 seconds