Having problems with your KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher ?

I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine but half way during the cyc

\015 I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. \012\012The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine after the reset seeing that the wash cycle started. The problem was about half way during the cycle it shuts down and the "Clean" light starts blinking again. Yes no clean dishes. This last time the water was actually hot or the rinse was but thinking it is not even allowing it to rinse since stuff is still not clean. After looking at the other problems and recommendations it looks like the heating element could be bad on this one. What type of diagnostic can I do hear to determine if it is the heating element or something else? Is the heating element pretty straightforward to fix?\012\012The other unit just won't start even though everything appears to be fine. It was working and decided to stop working. The lights are fine meaning the "Clean" light does not blink but even after reseting that unit there is no noise when the "normal" or start or combination of those too buttons are pushed. This one could be the door latch or maybe one of those cable things I read about in another post. Please advise what I should do with this one. \012\012My concern with sending a tech out I could run in to a thousand bucks in fixing the two when I should go out and buy something new that will be under warranty at least. Doubt I will purchase another KitchenAid based on review.s I have read lately\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine but half way during the cyc


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

For my Kudi01dl model dishwasher, the rinse light is on, but the unit will not respond to any buttons being pressed and won't turn on. When I press any buttons, two horizontal lines show in the front, but go off as soon as I let go of the button. Is there a ways to reset the unit? Everything was functioning fine the last time I used it. I use it about once a day. The problem started when I heard sounds coming from the unit, very loud motor sounds. The door was closed but I had not turned


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

My bosh dishwasher SHX55M06UC/46 will not drain. A new disposal was put in and the dishwasher drain plug was not punched out and the dishwasher was ran that way. Now it just holds water in the bottom. I've tried resetting or canceling the wash cycle but that doesn't work and the washing cycle works fine. I'm hoping there is a reset or a safety for the pump if it gets clogged.


... Dishwashers

Idl 705 Hi our indesit IDL 705 stops half way thought a wash with the red salt light on(despite salt being full), can reset it and get it away but not ideal any ideas? Thanks


I have the same problem, what was the problem and how did you resolve it? ... Indesit 24 in. IDL700 Built-In Dishwasher

Cycles improperly My dishwasher does not cycle properly. It races through the cycles, even when set to pots & pans, in about ten minutes. At first I thought it not filling properly, checked the fill switch, it's fine and water does come in. Then when it's finished it does not always drain completely. I have checked everything on the drain end as well. It seems to have a mind of it's own. I replaced the $145 computer control with no luck. It actually sped up from the original 16 minute ful


Hi there,\015\012\015\012please let me know the make and full model # off your d/w.\015\012\015\012thanks ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Maytag silverware blast not working at all. First a few buttons would not light up but I was still able to start it. now nothing works. Electricity is fine, circuit is on. It is only 16 months old. is there a way to reset the circuits ? tks


I just wanted to post because I got a used Maytag from a friend and its panel wouldn't work. There is a reset button on the underneath of the dishwasher next to the power supply on a white plastic thing. I pressed it and it washes now. it puts it at ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a Kitchenaid KUDK03CTSS2. It goes about half way through the entire cycle, let's say half hour in and then it sits there buzzing/droning for at least 30-40 minutes, then it finishes fine. Had a service guy in and he would't wait for the symptoms to appear. Everything is good at the beginning. He replaced the pump motor, didn't find any debris in the unit. But it's still doing the same thing.


Turn the dishwasher off about 20 minutes after it starts the droning/ buzzing and feel the water temperature.\015\012\015\012Also run the dishwasher in a short cycle where it uses cold water only and see if there is any difference.\ ... KitchenAid Dishwashers

Hi, I have a Miele G681 dish washer with an intake/drain light problem. I've read all posts about similar problems I could find both on this forum and others but I'm afraid I still can't figure my problem out. The intake/drain light starts blinking mid way into the dishwashing process. The dish washer fills up, rinses, drains, water is hot, everything seems to function just fine. Some time after the tablet drops from its door mounted container, and the time estimate reaches 46 minutes r


... Dishwashers

Kleenmaid DW10 dishwasher has blown motor. Everything else works fine. Service guy said part has to come from Brandt in France. About 6-8 weeks but no guarantee if it will arrive at all due to Kleenmaid's problems. Any other time and cost effective way of replacing the motor?


Time and cost effective way = have the electric motor repaired. All an electrician needs to do is to rewind the coils inside the motor and replace the brush... you will save around 80% if you will just have it repaired plus, it would only take 1 week ... Dishwashers

The clean light won't go off on my Frigidaire 1000 series dishwasher and the only way to make it run or work or do anything is to reset the breaker. I have tried everything. PLEASE help


Hi\015\012If clean light is blinking 7 times then it may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting the same error. If yes, th ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My dishwasher if a Fridgedare Gallery dishwasher appros 6 yrs old with an electronic front...just ran the dishwasher..everything fine and now all the lights are flashing and i can't reset and the dishwasher won't turn on. Can u help


Hello. I would turn the dishwasher off at your electrical panel and leave it off for five minutes. THen turn the power back on and it may reset everything\015\012\015\012lem me know as I have additioinal ideas if this doesnt work ... Dishwashers

My dishwasher is out of warranty only had a year and it just quit we had an electrical storm is there a way to reset it whirlpool Model # DU915PWSSO ive tried everything and im so broke right now


... Whirlpool Dishwashers

I brought this model second hand when i first switched it on it seemed to work fine then it stopped half way through the program and now has a unreadable desplay on the front panel and wont do anything i've tried resetting it but still know luck?


... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Where are course and fine strainers on Kitchenaid dishwasher KUDSO1DL, so I can clean them? Glasses are cloudy and not getting clean and we've tried everything and thought strainers could be plugged up. The instruction book refers to them but does't say where they are.


... KitchenAid Dishwashers

John Lewis JLDWW906 Slimline Dishwasher, White. Hi all, have a problem with my dishwasher. The display is showing an error of i30. Can't reset it. Have checked the filter etc and everything seems fine. John Lewis technical advice not open till Monday and engineer can't come till Thurs. Help? Thanks


... Dishwashers

Our GE Triton Dishwasher, mod# GSD5620D01BB is 10 years old. A problem started two days ago where; when it runs through a normal washing cycle; it contuously beeps about every 1 second when it reaches the Drying Cycle and the LED Green light flashes next to the Drying . I reset the breaker and tried again; same thing happened as it went through the normal cycle and when it reached the Drying part; same thing happened. The dishwasher is cleaning and everything else seems to be working fine.


The drying fan and vent system seems faulty.\015\012\015\012Refer this diagram. Item 918. ... Dishwashers

My dishwasher only fills half way and it dosn't go through the wash cycle. It pumps the water out and then go to the rinse cycle but has the same problems with the water level. We have checked the motor, pump and the water valve. It seems to be working fine. Thought it might be the timer.


Hi,\015\012\015\012This is an issue with the wash motor..\015\012There are two motors,a wash motor and a drain pump/motor assy\015\012The wah motoe must have been the issue with the case.Changing the wash motor will solve your ... Dishwashers

Maytag mdbtt79 high current error but have checked everything broken impeller was replaced but still getting error is there a way to reset the control board have checked with ampmeter and current is with in specs


You may need to check connections on the control board,it may be receiving a "glitch"code from poor connections ... Dishwashers

OE Error I'm getting an OE error which is a drainage trouble error. I checked the hose and the drain, and everything is clear. My diswhwasher runs 98% of its full cycle and usually with 2 minutes to go I get this error. I have 2 opinins as to why this is happeneing. 1. Maybe the clog is in my trash compactor, however that seems to be working fine and my sink is funning with no slow down. 2. My 2nd theory is I have to reset the progam within the dishwasher. Like how sometimes I


Had the same problem and had the pump replaced ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Have a genarac pressure washer when trying to start the engine catches half way through the pull with spark plug out it cranks fine


... Briggs & Stratton Power Products 1539 Pressure Washer

Electrolux ESL 63010 dishwasher. This worked fine until the door catch broke. I replaced the catch but could not remember which way round the two electrical leads went (red and black). I tried both ways with the same result. The lights come on the control panel and I can change the programme, but on closing the door the house fuses blow. I have checked the earth cable is fine. Any ideas?


Red - is active powerblack - ground or neutral ... Electrolux Dishwashers

I have a GE Profile Triton Dishwasher and it has worked fine for about 8 years. Suddenly it will not reset. The reset light blinks after reset but you can not choose a normal cycle afterwards. I shut of the machine by pulling the fuse box. I turned it back on but again it will not reset?


Hello, how are you?\015\012It sounds like you have a stuck key on the keypad, preventing you to push any other key.\015\012I've seen this problem many times in the past 4 years.\015\012Good luck.\015\012Ned ... GE 24 in. Profile PDW7800 Built-in Dishwasher

AFTER A BRIEF POWER OUTAGE DUE TO ELECTRICAL STORM THE F1 CODE FLASHES AND PUMP RUNS CONTINUOUSLY. TURNING POWER OFF ONLY STOPS IT FOR SEVERAL SECONDS. TURNING OFF POWER TO DW AND BACK ON DOES NOT RESET. I HAVE REMOVED THE BOTTOM DRAWER AND CHECKED FOR WATER, BUT UNIT IS DRY. IS THERE ANOTHER WAY TO RESET THE SWITCH?


Hi there,The f1 fault is cased by a leak on the dishwasher.It is activated when water gets to a dangerous level in the base of the appliance near to the PCB.The main reason this happens is putting cups on the drop down s ... Dishwashers

GLD6200 NOISY We have above unit approx. 2 years. It just started having a "rumbling noise" when running (all cycles}. The floor even vibrates mildly. It works fine just annoying - it used to be very quiet. Everything I know how to check seems fine. Do I need a repairman ?


The sound is almost always caused by a worn docking cone “O” ring on the main conduit. When the docking cone “O” ring wears, the mid level spray arm conduit is no longer constrained and it can vibrate against the docking cone, ... GE 24 in. GLD6200L Built-in Dishwasher

Something is causing the DW motor not to fire (so water is not sprayed around). It fills fine. It drains fine. I've tested the motor - it also works. I've tried all the various cycle choices; all do the same thing. Water fills but is not pushed around the tub (absolutely no motion from the motor, whatsoever). There was some debri down in the bottom, but I've cleaned it all out, wiped everything clean, and still no motor activation.


Clean pump and spray arm holes and any filters...you may need a pump kit if you see damage in your pump ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0608 seconds