Having problems with your KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher ?

I recently purchases a KitchenAid dishwasher model kudsosfrss from a thrift store (I know, silly me). On intallation I learnd why it was in the thrift store. The Normal and Start/Resume buttons are dead on the keypad, and the washer will not run. I don't want to throw good money after bad, but if I can buy parts and fix it myself I figure it might be worth it. Any suggestions?


Answers :

8574143 is the part number for the black console control panel which is the part i believe u want,, u may look at it or purchase it at repairclinic.com, searspartsdirect.com, hope this helps let me know
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I recently purchases a KitchenAid dishwasher model kudsosfrss from a thrift store (I know, silly me). On intallation I learnd why it was in the thrift store. The Normal and Start/Resume buttons are dead on the keypad, and the washer will not run. I don't want to throw good money after bad, but if I can buy parts and fix it myself I figure it might be worth it. Any suggestions?


8574143 is the part number for the black console control panel which is the part i believe u want,, u may look at it or purchase it at repairclinic.com, searspartsdirect.com, hope this helps let me know ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Hi silverdragon, re the dishlex 302 not heating or drying Have replaced heating element but unfortunately still cold. If the control panel has not shorted which it hadn't before, do you have any suggestions. My hubby would rather wait before buying a new dishwasher, but I don't want to throw good money after bad. Is there anyone you can suggest who would be able to check out the circuit board to see if i have missed anything.


Hi\015\012\015\012Check the two thermostats located at the inside bottom front\015\012panel of the dishwasher, if any one of them goes bad it won't heat. Hope this\015\012helps...please post back for further assistance.\015\012\015\ ... Dishwashers

This dishwasher smells so bad that it makes you want to throw up,Even after you wash and empty it. After an hour or two you do not want to get your nose close. Jenn-air claims they have not had problems like the one mentioned. BS


Hello. Do this. Empty any dishes out of the machine and pour 2 cups of white vinegar right into the tub of the machine. Then run the pot scrubber cycle using the hottest water setting. This will clean and freshen your dishwasher. REpeat when nee ... Jenn-Air Dishwashers

KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher: Just stopped working before Christmas. I had washed a load a day before, and the next day I couldn't use the Rinse Cycle. The lights turn on for Normal and Heavy, but nothing happens when I press Start. I played with the breakers a couple times, to try to "reset" the machine, but it didn't do any good. I really don't want to be spending a lot of money on that dishwasher, especially after reading all the horror stories abo


... KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher

My LG dishwasher -LDF7810st has been a huge problem from the beginning. However I will just focus on the current issue. Previously it was leaking and I kept towels under the dishwasher. Then one night there was a deluge of water all over the place. One guy says the seal is bad then another no its the whole seal around the dishwasher is bad. No one seems to know and I dont want to spend $250 to find out. I remember a previous post that said their was a design flaw with a part of this but cannot f


... LG 24 in. LDF7810 Built-in Dishwasher

I WANT TO INSTALL TWO CABLES IN MY DISHWASHER DOOR, I HAVE THE CABLES, JUST WANT YOU TO SHOW ME A DIAGRAM AS TO WERE THEY GO, MY DOOR TO THE DISHWASHER FELL DOWN, THE CABLE BROKE, MY DISHWASHER IS OLD BUT STILL WORKS GOOD


... Dishwashers

Model # FDB2000RFC1 Dishwasher does not want to drain. When it drained made a gurgling sound in the sink. You want to charge me for asking advice on a technical problem this is something you should do as part of your service. I buy your product, no manuals are issued like in the 'good old days'. I will take you up on your ' 7-day free Expert Support'


HI.If there is an air gap (located in the sink, near the faucet), check to see if it is clogged. Unscrew the top cap and see if there is anything blocking inside. Note: If there is no air gap installed, the dishwasher might not drain properly. ... Frigidaire Dishwashers

Dishwasher model EIDW6405HTOA. MODEL # THO4259825. Installed past December and it doesn't wash. Things come out with spots, film etc. We payed a lot of money for this piece of junk. Talked to Electrolux in Atlanta, have two repear men and they said that as long as the water is running the dishwasher it's good. REALLY! Then why we have to WASH THE DISHES BY HAND, after the dishwasher finish the cleaning cicle. Costumer service in Atlanta it's as good as this dishwasher. We'll make sure to send m


... Electrolux Dishwashers

My hobart dishwasher fxd200 doesn't want to fill with water anymore... What could the problem be and any suggestions? Have just had other expensive repairs done and don't want to spend any more money on this old machine if it is not worth it


... Hobart Dishwashers

Hi My Dishwasher Favorit 40660 does not want to wash i press the on button and then normal wash then it wants to start but then all the lights are flashing no wash is starting and making a very bad noise.


... AEG 24 in. Favorit 40660i Built-in Dishwasher

I have a Briggs & Stratton Pro 3400 pressure washer that I got new last year and used for maybe 5 hours and it worked great. Have had it stored since then with stabilizer in the gas (I didn't run it dry) and now it won't run for more than a minute or two without dying. A dealer said it was probably bad gas and I now know that even with the stabilizer I should have run it dry last year before storing. Everything is like brand-new including plug and air filter so it must be the gas/carberator gunk


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

My B&S 2050psi, 2.0 GPM, 3.75HP, doesn't want to start. I prime it as per the directions, good gas, spark plug good. I can flood it with gas and it runs until all the gas is used up then stops. I don't know why it's not able to get any gas from the tank on it's own. Once it starts shouldn't there be a vaccum that draws gas from the tank? Any ideas?


... Briggs & Stratton Gas Pressure Washer 20244

Dw 10 just had the all kitchen flood for the third time in 5 years. why does it happen what can i do t avoid it. still have some water in the dish washer how do i get rid of it. my husband wants to put it in the at the dumb i want to keep it... it so good most of the time .. what should be my arguments?


Are you please able to provide the manufacturer name of the dishwasher. I know it is a DW10 but which make. Is it Haier ?\015\012\015\012Do you have a kitchen insinkerator? People sometime forget to run it and start the dishwasher. This c ... Dishwashers

Good Morning, I don't need any help except to get rid of my lg dishwasher because it is the worst dishwasher I have ever had!!! I have had it fixed once(new motor ,new soap tray,new board) and it still does not work good and still smell like it is burning up. I have not been as unhappy with anything in my life. WISH I HAD NOT HEARD OF LG AND WASTED A LOT OF MONEY!!!!!!!!!


Hi,You might be interested in this.....http://www.contacthelp.com/directory/Shopping/Electronics/LG?ListingID=386heatman101 ... LG Dishwashers

Kenmore elite 13852 will not show any lights. looks like no power but checked breakers in basement and everything looks good. Is this a bad door switch or is there a bad internal fuse? Thanks for any help!


INTERNAL FUSE,but most of them dont have a fuse and it is the controll panel...check with volt detector that you get power to the control panel if you do ..then its the panel if you dont , its the conection to your macine. good luck ... Kenmore 13859 / 13854 / 13852 Dishwasher

My preassure washer aint but year old hasnt been used but 3 times and its getting a good water supply but want spray no preassure it has a annovi reverbi model srmw 2.2g26 on it what do i do to fix pr


Sometimes, this is simply the intake, where the hose hooks up, being stopped up. Bugs like to crawl into hoses and build nests. However:Usually when a pressure washer presents with this complaint, it has taken some damage in some way. The ... Briggs & Stratton Pressure Washers

Kitchen Aid Dishwasher not cleaning as good as when we first got machine. Have tried different detergents and rinsing more and even less dishes but that doesn't change the cleaning. It's still bad...what to do????


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... KitchenAid 24 in. KUDC25 Built-in Dishwasher

I temporarily misplaced (not lost for good) the owners manual for my honda pressure washer : engine and pump. I do not want to run my machine again until I verify the pump oil content/level. On the pump itself, at the top, there is a black, unscrewable oil cap, with blue-ish oil in it, BUT NO DIP STICK! How do I check the level? What kind of oil, specs etc? Thanks!


Http://www.ultimatewasher.com/download/honda-engines/gc160.pdf ... Karcher 2500 PSI Pressure Washer

My dishwasher makes the sound like it wants to start but doesn't. I had this problem about 4 years ago but the repair man would not allow me to see what he did. It took him all of 30 seconds to do something under the front of the dishwasher. I do not have the money to call the repair man again. Please help. I have a ge dishwasher.


You my have allowed your dishwasher to sit for a while. The seals in the motor and the pump can get frozen. Sometimes high minerals in the water can stick the seals together not allowing the motor to run and it hums.\015\012\015\012 ... GE 24 in. GSD4320Z Built-in Dishwasher

Danby ddw497w will only be about 5 min into cycle when digital code E2 appears it then starts beeping 2 min after this it just stops the unit is only one day old it ran once yesterday fine now i get this code no matter what cycle it is on I bought mine new off the internet and it's been running great for about 2 months. Now I can't get it to drain and E2 shows, I can't get my money back because I've had it more than 30 days, if the solution is a pump, I'm tossing it and getting a good one from


E2 is a hose issue. There is either a kink in the hose, the hose is too high to drain or the pump is faulty.1-800-26 DANBY ... Danby DDW497W 22 in. Countertop Dishwasher

Machine does not heat up. The water remains cold and the cycle takes hours irrespective of the setting temp. Heater seems to be OK and a tech guy repleced the sensor today as he thought that was the problem after everything else seemed to checkout ok but still no go. It has already cost us 200 dollars and I dont want to keep spending money having tech guys guessing the problem. Any suggestions? Thanks


Depending on the model, I have had loads of Bosch dishwashers fail because they have blown the heater relay solder joint on the main control board. Usually just requires control board to be opened up, and the faulty solder joint re-soldered. Occasion ... Bosch Dishwashers

My Bosch SHX46A06UC/42 stopped working today. I can hear the drain pump constantly pulsing about once every second. I checked the control board and found a relay contacted burned. I re-soldered the relay so it now has a good connection, however the drain pump still just pulses. How do I verify if the drain pump is bad or if the relay failed, or yet another problem?


... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

I have a Kenmore Elite dishwasher (model 630.17303406) and it just stopped working. Doesn't drain what's left in the bottom and just makes a humming sound when turned on. Power is good, sounds like the motor is working. Doesn't seem like it is drawing water in. I want to check the pump and motor, anybody have any advice?


If nothing obvious like blocked / obstructed outlet pipe\015\012You need to check if the outlet pump motor in line with the outlet hose is spinning when in the outlet mode. First check if it is spinning by looking at it and see if the small fan ... Dishwashers

Maytag My Maytag dishwasher is leaking from the bottom. It is a mdbh940aww. it was never used before. It was wrapped in the plastic wrap when I bought the house in 2005. Now the old one just went and I want to put this one in. It fit nicely, works great but leaks all over the floor. It is level and I check most of the parts. I put a mirror underneath and it looks like the rubber thing isnt looking too good. Do I replace this? If so how?


I also had a mdbh940aww that leaked from underneath. You need to check out where the water is leaking from. Unscrew and remove the bottom front panel so you can view under the dishwasher. Start up the dishwasher and using a flashlight see where th ... Dishwashers

I have a Karcher 2,600 PSI 2.3 GPM Gas Pressure Washer G 2600 VHR that I have used once last summer. I have stored the PW in my basement with no fuel in the gas tank. The PW was never exposed to freezing temps. I cannot get the PW to start. I put new fuel into the tank, the oil is good, I drained the carburetor, and the spark plug works (tested it). I pull the cord and the engine doesn't turn. Fuel value is on, choke is pulled, and the starter switch is turned on. System is practically brand new


Hi I have a similar pressure washer from Kartcher and the same scenario as yours I have owned it for about 2 years and noticed that it was getting harder and harder to start with each time I use it which is months. If your pw has a honda engine on i ... Karcher G 2600 VH Gas Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0345 seconds