Having problems with your KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher ?

Handle is lose

\015 How do I tighten the handle... I have tried different hex nut tighteners but non have really fit the hole and it won't tighten.\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi I have a dishlex global 500 and the handle broke. Whilst I was replacing the handle some cables came lose an got disconnected.. So I would love it if it is possible to get some sort diagram or something to plug the cables back in the correct spots Thank you


See the diagram attached.sincerely. God bless you ... Dishwashers

Loses pressure Worked fine until I released the wand handle, then no pressure.


The unloader valve in the water pump is stuck. The grease wears away after time. You need to remove it, apply grease to the upper o-ring and reinstall it. Use pump guard in the future to prevent this problem. ... Karcher 2500 PSI Pressure Washer

Handle is lose - Blomberg Dishwashers


Tigten it up. ... Blomberg Dishwashers

K2300G Karcher Pressure Washer losing water pressure


... Karcher 2500 PSI Pressure Washer

The door handle is broken which enables the opening of the door. Therefor we can't open the door and need to replace the handle but dont know how . The handle is situated inside the door and there are no screws around it to to take it apart. It is an Indiset DG5000 model. There are screws at the edges of the door.


I had a similar problem with a similar model.\015\012Insert a fine screwdriver into the small space immediately abive the handle. Press the inside end down firmly and the lock should release.\015\012I ran mine for about 3 weeks, this wa ... Dishwashers

I have a dd24dctb6 Fisher Paykel dishwasher and the handle on the top drawer came off on one side. I can get a handle kit but don't know how to disassemble the existing handle. Is there a repair manual somewhere? thanks


... Fisher and Paykel DD24DCTB6 Builtin Dishwasher

Handle Replacement How do you replace the "latch" handle on the latch assembly?? I have both of the parts but there is no way of installing the handle on the latch assembly. Thank You


You can see a video of this very repair being done on your dishwasher here: http://thatsawesome.tv/?p=44 ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

Jdb2100aws dishwasher - door handle fasteners loose, handle ready to drop off. This is a dissambly question: The middle section of the door has an upper one-third (which contains the input switch strip) and a lower two-thirds; the upper section must be removed to tighten the door handle fasteners. After wiring is disconnected (yes, power is OFF), the upper section appears to be held to the shell by some kind of barbed fastened from the inside, run through a tab on the door shell and into a fema


After removing the stainless cover l tried to disassemble the door further but found it difficult, there is a hard thick plastic cover, i took my dremel and cut a small hole large enough for a wrench to fit and tighten the thin nut on the handle, lin ... Jenn-Air 24 in. JDB2100AWS Built-in Dishwasher

One side of the handle fell off. The inside of the door is secured with rivets which makes access a problem. I'm thinking of just running a screw through the handle into the door because I'm not going to buy a whole new door for a broken handle. what do you think ???


... Fagor 18 in. LVC-21W Free-Standing Dishwasher

Should knives/forks/spoons be loaded with blades, tines,bowls down or up in dishwasher? When ready to load knives/forks/spoons in the dishwasher, should you load the utensils with the handles at the top, or should the handles be at the bottom with the blades of knives, tines of forks, and eating portions of spoons be placed face down in the dishwasher? Simply put, should the handles of the utensils be placed up or or down when you load them in the dishwasher?


I find they come cleaner with the handles down, but if you have kids they come clean enough and are safer loaded with handles up, with spoons though, always load handles down so they can get the clean water to the whole spoon. ... Frigidaire FGHD2433KF Builtin Dishwasher

LD-1204W1 handle of the door is stuck and will not start. handle is not lifting. What do we do to fix it?


... LG Dishwashers

I have a Honda GC160 motor on a powerwasher. The engine stalls when I release the power wand handle, but if i keep the handle squeezed, it works but the engine sounds like it is laboring.


... Honda Pressure Washers

Hi I have a brand new Honda Power washer GC 160,2600 psi 2.3 GPM my husband taught me how to use it last night and I think I have followed all of steps: 1. hose free of kinks 2. connected to machine 3. purged pw handle of air and made sure water from house coming through 4. pulled out choke 5. turned red button to "ON" position 5. pulled T handle enging starter and it sounds like it will start but doesnt what am I doing wrong??? yes it does have gas in the fuel tank.


... Karcher 2500 PSI Pressure Washer

The handle on the powerwasher leaks and the opening will not close. This has cost it to loose pressure. Can this be fix or do we have to purchase a new handle?


... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Handle on dishwasher broken, replaced with a new handle but door doesn't snap closed therefore will not turn on


If this assembly is not properly installed, it will do this. There are some things that can be missed. I would suggest removing the door from the unit and taking it to an appliance repair shop. Sometimes they will just look at it and can be able t ... KitchenAid Dishwashers

The handle that opens the dishwasher does not operate properly, the dishwasher is about 5 yrs old what do you think would be the cost of the handle??


The labor will be the most expensive part and the part cost depends on the model you have. Expect to pay $25-$45.Eric ... Kenmore Dishwashers

I have a Magtag dishwasher, model #MDB6650AWQ thats not running. I check the power supply all the way up to the door latch and it shows that there's power there. However the circuit panel not lighting up and nothing happens when you push the normal wash cycle or any of the other buttons. I believe the problems is electrical in the door latch handle. Is there any way to check the solenoids which are attached to the door handle before I order a new door latch.


I have the same problem with mine. It is 3 1/2 years old. The repair man was just here and said it is the control panel. It will cost $171.85 for the part and then $53.85 today for his visit and then a return visit when the part is in.\015\0 ... Maytag Dishwashers

I have a MP1300 model electric washer and it loses pressure during wash until I shut it down for a few minutes and then restart it, it then washes with full power for about 3 minutes and then loses pressue again.


Ipl.ordertree.com/ipl/604/mh1300pressurewasher.pdf - 23 hours ago\015\012\015\012\015\012\015\012www.fixya.com/support/mcculloch/pressure_washer ... McCulloch Pressure Washers

I have the Coleman powermate 2400 PSI pressure washer and on initial start it sprays and has great pressure. But once I release the spray handle it will not spray again, not even one drop of water. I have verified water pressure, bought 3/4 hose, and also changed the spray handle with no help. Pressure washer was bought new at Lowes, but did not use for first three years of ownership, should have tested it. Thanks for any help on this. Ted Miller


Sounds like the valve in the handle is sticking closed. May have a broken spring, or maybe a part is stuck..\015\012I say take it apart, and the answer will present itself.. Play with it with nozzle out too... Maybe something is stuck after st ... Coleman Pressure Washers

Pump loses pressure after you use it a while even when trigger is never lifted . i can start it up it runs good trigger pulled and then it loses pressure no cavatation


Looks like you need a new diaphpragm in the pump unit ... Northstar Pressure Washer 3000 PSI

How do I disconnect the electrical wire plugs from the door handle in order to replace the handle? The plugs won't pull straight off and so I am wondering if there is any piece of equipment needed to disengage the plugs from the prongs.


First shut off the power to the dish washer. The plugs are just verry hard to pull off. You may brake the switch on the old handle but if you have the right new part it should have new switches on it. Just pull hard side to side wiggle off. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a user guide for my ASCO 1996 dishwasher however when we lose power it loses its settings. I have had a repair guy come out and charge me $100 just to hit the wine glass 5 times and reset. This time the drain cycle is not long enough and I know you can program it to give it a longer drain but I don't know how and these appliances don't come with programing instructions which seems completely stupid to me!!!!!


You will need to call the engineer at your place.as the settings are available with the service center sources only.the engineer that visited your place was either a ASCO  engineer or he has received the service manual  from ASCO techinicia ... Dishwashers

Karcher electric power washer. When I release the handle, the machine stops working and it won't restart at all. I've only used it 2x, but it shut down each time. Trigger handle won't work.


... Karcher K2.26 Electric Power Washer

Door handle needs replaceing I have new handle how do I do it? Do i go in though the frount or do i unscrew the back of the door?


\015\012\015\012you will have to unscrew the back of the door.\015\012\015\012Open the door to the dishwasher and remove the inner panel by turning out the stainless steel screws at the outer edge of ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0245 seconds