Having problems with your KitchenAid 24 in. KUDS02SR Built-in Dishwasher ?

2-year old unit. Cleaning quality has become

\015 2-year old unit. Cleaning quality has become increasingly poor over the past few months. Each load will have a dish or bowl (or several) which come out almost as dirty as they went in - even with prerinsing. Please let me know if there's anything I can do to fix this. Thanks.\015

Answers :

Clean your machine using White Vinegar
\015\012You can remove your spray arms and soak them in Vinegar to unblock them blowing out rubbish and unblock the small holes
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS02SR Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

2-year old unit. Cleaning quality has become


Clean your machine using White Vinegar \015\012You can remove your spray arms and soak them in Vinegar to unblock them blowing out rubbish and unblock the small holes ... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

Both of the baskets are rusting and even several of the rungs have completely rusted off. This dishwasher was installed in 2003, 6 years old. Has anyone else had the same type of problem with this model? What happened to dishwashers lasting for 10-15 years? Where is the Maytag quality?


The problem is most likely due to minerals or other impurities in your water. The nylon coating covering the metal dish baskets erodes quickly from contact with this water. It is also exacerbated by the wayers high temperatures. ... Dishwashers

I have a Fisher Paykel dishwasher Model # DD603. It is about 5 years old. My problem is that the top drawer is difficult to open Pulling it open it becomes easier once I get beyond a certain point. The reverse is true when closing it. Any help would be appreciated. Thanks...Jared


Sounds like your lid actuators are not opening completely, they move the lid up and down. They are prone to failure, F/P has new actuators, German made, that can be installed and would probably solve the problem. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

MDB6709AWW1 Poor Quality Control Panel Our dish washer is 2 years old this month and the control panel broke!!! My service technician told me that he has seen DOZENS of new Maytag dishwasher control service panels break and is convinced it is a design flaw. When I called Maytag the customer service rep had the NERVE to tell me "that because the house is near the beach, I must get a lot of power outages and power surges, that is why the control panel broke." I told her I wasn't born yesterday


... Maytag Dishwashers

My Kenmore 13743 is 3 years old and was washing perfectly until a couple of months ago. It has become so bad that it won't clean anything on the top rack and barely anything on the bottom rack. In fact, I just pulled a butter knife out of the rack that still had butter on it! Not normal... I do not know how to remove the bottom washer arm to get at the chopper, filter, etc. Please help


Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012You are likely right on, this is very common with these unfortunately. Hopefully this will help.\015\012\015\012**Unplug the unit or turn off the powe ... Kenmore 13743 Staimless Steel Built-in Dishwasher

I have a 9 year-old Maytag dishwasher. The front button panel has become so indented, I have trouble getting the machine to turn on. What to do?


Remove 2 screws on bottom take panel off fix indent...thumbs upVE6GAR 73 88 99 ... Dishwashers

Kenmore Elite - 9 Year old Dishwasher - A circuit blew and the dishwasher stopped in mid-cycle and did not drain.... I reset the circuit breaker and "manually" took the water out of the dishwasher. When I push buttons to restart the "95" shows up for the normal cycle. However, when I push start the "95" becomes a "--". Suggestions???


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Maytag quiet series 400 wash, start, and delay buttons starting not to work. Normall wash is the only wash button that works and start and delay buttons are becoming very finiky. What is my best course of action? Washer is 3.5 years old.


... Dishwashers

My Whirlpool Quiet Partner II (model# DU1145XTPBA) was quiet when I first installed it in Nov/2007. It is only 2.5 years old and the motor has since become much louder. Any issues with this model that I'm not aware of that need attention?


... Whirlpool Dishwashers

I have a 3 year old GLD6200 that gets used once per week While running it this morning I heard a sizzling sound, i turned around just in time to see the control panel flicker and go dark. This was followed by a little smoke & a very distinct motor-burning smell. My first though it that it's toast - suggestions?? In searching for info on line I must admit I am dismayed at the number of negative comments about product quality & customer service after a break-down. Hope thats the exception and not


... GE 24 in. GLD6200L Built-in Dishwasher

Our 16 year old dishwasher takes way longer to finish cycles, has become very loud and now no longer cleans the dishes - especially the top rack and the silverware. We have hard water and I have run it with vinegar in a bowl 3 times and have been cleaning all the deposits I can today. It doesn't seem to be draining out all the gunk. Water flow seems ok, the arms have nothing blocking them. Any instructions for me to follow to clean out the mechanisms? Or has it run its lifespan... Thanks!


Parts are no longer available for your dishwasher. Typically - manufactures end support after 10 years.Your hard water deposits will never come all the way out. They will be "clean" for a month or so until another calcium chunk breaks free and ... Dishwashers

Mine is a stoves diswasher about 8 years old or more. It runs the full cycle but the water does not heat up at all. Hence the quality of wash is not good . What should I do please? Pravin.


... Stoves Dishwashers

My intergrated whirlpool dishwasher two year old starts beeping prior to the rinse cycle with a sequence og two flashes on the start button. it is two year old model adg 7450


2 flashes indicates the flood sensor in the base has been activated.\015\012Either a seal leaking, or the sensor is faulty.\015\012\015\012Press and hold the start button until it stops flashing to reset.\015\012\015\012 ... Dishwashers

My 2-year-old LG Dishwasher doesn't clean the dishes well any more. It used to work great, I was very happy with it. For some unknown reason it doesn't work that way any more. The dishes come out dirtier then they were before I put them in. I had three guys come in and look at it and they all said that there is nothing wrong with my dishwasher. My water heater is 1 year old, works great everywhere else in the house, the dishwasher is hooked up the right way, by a professional, I don't have hard


The heater does not heat the water it keeps it hot check there first id say the heater or thermal is bad if both check good replace control ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Edesa practica 10 years old can i get a programmer the dishwasher is going but the programmer does not go round it is 10 years old can i get a new part in spain


... Dishwashers

My dishwasher will not start. If you unplug it and plug it back in it says 1H, no matter what button you press it then says 2H and if you press another button it will say 3H until it runs through to 9H then will display --. It will continue to do this until you leave it alone and walk away. Then after a few moments it will clear itself out and the 'Normal' light under cycles will continue to blink. The dishwasher is 3 maybe 4 years old. Please help, I have a 3 year old and an 18 month o


Hi,There could be Few Possibilities.Let's try to Reset. 1h, 2H -----9H usually shows delay X hours Display where X would be 1,2...9.Turn the Power OFF for few minutes, say 5 Minutes and then Turn it ON. ... Dishwashers

Got Karcher K2.90M - 3 years old but only used twice-used last year but pressure died after 30 minutes - tried again next day with same result - any ideas


... Pressure Washers

I have a Frigidaire Professional series less than five years old. It won't run and flashes the wash, clean, and sanitize lights simultaniously. Any thoughts on what the problem is and whether it is worth fixing? This is the second Frigidaire I have had in ten years. The model number is PLD2851RDC3. Any help would be greatly appreciated before I go out and get my third dishwasher in ten years!


Hi.The two lights are not an error code, but they are telling that the machine is in failure mode.The error code is retrieved performing a water/service test.The water/service test is a special function initiated ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher

Error code LE comes up after 2 min. when trying to run the dishwasher. We had the motor replaced when dishwasher was 1 year old then again a year later. It has been less than a year and it is doing the same thing.


I had the same problem. It was caused by 1 or more wires in the door that have cracked and split apart. I cut the bad sections out and reconnected the wires and it works now. The LG's are known to do this. LG said they would send all new wire har ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

I purchased an 18 inch frigidaire dishwasher in February of 2006 - model fdr252rbs serial # th 54593325 my instruction catalogue states that there is a 2 year warranty on the motot. Unfortunately the appliance repairman diagnosed the problem as the motor burn out or failure. I cannot believe that a motor should die after only 2 & 1/2 years I have purchsed many frigidaire appliances over the years and had great respect for their quality which has evevidently been lost For that reason I sha


WHEN I CALLED ELECTROLUX I WAS PUT ON HOLD FOR 45 MINUTES AND \015\012WAS NOT ABLE TO COMMUNICATE MY PROBLEM TO ANY ONE.AND WAS \015\012FORCED TO LISTEN TO ' we appreciate your patience' please hold' over and over\015\012 during tha ... Electrolux Dishwashers

My Bosch dishwasher is leaving white marks on my glasses. I use Jet rinse and a small amount of powered detergent. This did not happen the first year I moved to my house (the dishwasher is about 3 years old) but is now happening in the second year we have lived here. Help


It could be your water. minerals in water ... Bosch 24 in. SHX33A05 Stainless Steel Built-in Dishwasher

Can't start the Honda GX160 5.5 HP Electric motor on my Chore Master 2400psi Pressure Washer. Got gas (checked through feed line), new spark plug, switch on, gas, choke ok, throttle a bit funky (about 12 years old on loan from a friend unused for 5+ years, no manuals). Recoil string sounds close to kicking over, but pretty half-heartedly ...


Is there an oil sensor unit if it is going bad it tells the engine the oil low and engine wont start. I had same problem with my pressure washer, i just unplugged the sensor unit and it started fine ever since ... Pressure Washers

Motor on campbell hausfeld electric pressure does not start 1500 psi ilive in fl no freezing of water left in tank unit is 5 years old use once a year. thanks jim


... Campbell Hausfeld 1,350 Psi Electric Pressure Washer With Auto Detail Kit #PW1350

My Bosch dishwasher is 8 years old and always worked well.. About a year or two ago the dishes started coming out dirtier than when they were put in, frequently encrusted with dirt and shredded dirt which looked like finelly shredded vegetable discards from the garbage disposal. The first set of repairmen sold me a new pump. The next people told me there was nothing wrong with it. The third repairman told me that I have to set the water heater on very High (for $98.00)


I do know this on most dishwashers water temp must be @ least 120 and not exced 150 degree`s before they will go into a complete wash cycle ... Dishwashers

I set up a drip system years ago and now am looking to replace it (old, worn, leaks) but the problem is this-I can't push any fitting (be it connectors, tees, etc) onto the main hose. Both hose and fittings are 1/2''. The fittings in the original system were not near as difficult to use-I also tried hot water (fittings) and ice water (hose), nothing. Is there any size difference between the old and new components?


It's not really a solution-it seems there are two sizes OD (.700", .620") both called 1/2" tubing. The appropriate sized fittings must therefore be used ... Raindrip R333CT Swivel Tee Adapter
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0717 seconds