Having problems with your KitchenAid 24 in. KUDS25 Built-in Dishwasher ?

KITCHENAID DISHWASHER KUDS25SHWH1 THE CHILD LOCK WILL NOT DEACTIVATE WHICH WILL NOT ALLOW ME TO WASH DISHES


Answers :

Press and hold the energy saver button until child lock light goes out
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS25 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

KITCHENAID DISHWASHER KUDS25SHWH1 THE CHILD LOCK WILL NOT DEACTIVATE WHICH WILL NOT ALLOW ME TO WASH DISHES


Press and hold the energy saver button until child lock light goes out ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Have a kitchenaid dishwasher KUDS25SHWH1 - the child-lock light came on and will not go off. It is a light and no button to push and hold except all of the select buttons for the type of wash you want, no air dry button. How do I get this light off?? The Child Lock light has come on by it's self and I cannot get it to turn off. I have never used this feature before. I have tried to hold the Energy Saver button for several seconds but the Child Lock light will not shut off. The dishwasher is loc


Unplug the unit for 15 minutes then plug it back in. This should reset all your computer system and make everything work again ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

I've had an LG LDF6810ST dishwasher for about three years with no problems. All of a sudden it won't close. It finished the wash, I emptied it, and when I went to close the door it wouldn't close all the way. It was as if something was getting caught not allowing the door to close completely. I searched and found nothing blocking, then I looked at the door latch and it looks as if the child lock feature is engaged. So the door is locked while open. I turned the child lock on and off through the


If all else fails.... kick it! at least you will feel better! ... LG LDF6810ST Stainless Steel Built-in Dishwasher

The kitchenaid dishwasher (model KUDC25CHSS1) appears to have the 'child lock' engaged on the led display panel. The 'energy saver dry' light is flashing red and when I attempt to push 'cancel' it only flashes and never goes away. When I attempt to press a 'wash selection' the 'child lock' then flashes. Please help.


On my unit, I had the same problem (child lock LED on, or flashing.The cancel process of pushing anything was not possible, as a bad/stuck switch prevented any input from the control panel buttons.The underlying cause of the problem turne ... KitchenAid Dishwashers

Electrolux 302 dishwasher. CL Child lock can not be removed using the instructions in the book. Wash cycle all mixed up. When set for reg wash 85 digital display said 85 now says 89. Also fan dry light is activated. When washing it goes from wash to rinse. When finished the dishes are fairly clean but wet as.


... Electrolux Dishwashers

KitchenAid Dishwasher I have a KitchenAid Model KUDS25SH Serial FKO531820 "CHILD LOCK" Light Stays on I have tried what is suggested in the manual of holding the ENERGY SAVER DRY button in for 4 seconds, it did not work, I have turned off the power to the washer, that did not work, any suggestions for this guy who is tired of doing dishes? Thank you. Nick


Nick,\015\012It sounds like you have tried all the normal things for this. It is possible that you have a stuck key on the panel. Try pressing all the buttons several times to see if they may be stuck. It may just pop it loose. If that does ... KitchenAid 24 in. KUDP01DL Built-in Dishwasher

Kitchenaid dishwasher mod#KUDS01DLSSO- runs till 54 min left on cycle in normal wash then normal light and add dish light begin to flash with 2 dashes where time should be and locks out


... KitchenAid Dishwashers

Upon selecting a wash cycle and closing the door the machine starts normally (heating water stage) but never clicks to allow water in and wash the dishes. Fails to advance to the wash cycle and just runs without doing dishes. There was water in the bottom after the last wash, filters are clean?


... Bosch SHV46C03 Built-in Dishwasher

How do you get the child lock off? New Bosch dishwasher The active, Rinse Agent and Wash light are red, but when you push the start button the Child Lock light come on.


... Bosch Dishwashers

I have a Kitchenaid Dishwasher Model KUDC25CHSS1. (Manual says KUDC25CH). The Delay Hours button is stuck on 2 hours. The manual says to cancel it, press it until no lights are on, but when we press it, the Child Lock light comes on. I tried pressing Energy Saver Dry to cancel the Child Lock, but that didn't cancel it. I tried turning off the circuit breaker for 5 minutes, but the same light(s) come back on when I re-set it.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?


... Kenmore Dishwashers

Westinghouse 905 dishwasher no power to control panel, worked alright did a wash. next morning went wash dishes no power.the night before while washing a child was pushing buttons while machine washing did this upset the [email protected]


... Westinghouse Dishwashers

I have a KitchenAid dishwasher KUDS01FLB6. The center wash arm assembly keeps falling off during the wash cycle. Two questions: 1. should the water release slots on the wash arm assembly be facing up toward the ceiling of the washer, or down toward the dishes? 2. why would the assembly keep coming loose - could the plastic connection be worn?


Yes the connection is worn or even brokenPlease rate/vote this response thanks ... Dishwashers

I have a Kenmore ultra wash sensor quiet guard plus. I am not sure of the year. My problme is this: I came home and the lock light is on. The door opens and closes, but I can not wah the dishes. No other lights will turn it on or off. The no heat dry button has the lock symbol on it, but I can not figure out how to turn off the lock. HELP!


The manual will tell you how to rest and take off lock. ... Dishwashers

My kitchenaid dishwasher won't wash. The clean light blinks and if I can get it to cycle, it turns on to ''2 minutes'', during which 2 minutes it makes some washer-like sounds but doesn't clean, dry or spit out any water. Before this, I wash having trouble getting my dishes clean. I wash able to get the bottom rack clean using the heavy duty cycle, but the top rack still didn't clean


... KitchenAid Dishwashers

KitchenAid dishwasher KUDS25SH - Can't operate because child lock


If holding the "Energy Saver/Dry" button does not solve the control board problem then most probably the control board would have failed and needs to be replaced .To identify it we need technical expertise in handling the circuit boards ... KitchenAid Dishwashers

The KitchenAid dishwasher "child lock " is on and we can not star


Hi\012\012\012Thanks for using FixYa. To turn off the child lock press and hold the\012Energy saver Dry for 10-15 seconds. If this does not help the unfortunately you’ll\012ha ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I am using the same quality products to wash the dishes as I have done in the past when I used this machine effectively but now--it doesn't seem to clean the dishes and leaves a film and food residue. My dishwasher is a KitchenAid Architect S Series II machine.


Dishwashers have a part usually called a separator or accumulator which traps the dirt from the water during the wash cycles while the water is continuously recycled to clean the dishes. At the end of the cycle the separator is flushed out and the tr ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Our Kitchenaid dishwasher model # KUDP021R will not start. We close door, select wash and press start. The control lock light at the top which is lit flashes a few times and then stays lit. Dishwasher remains silent. An aside which may be helpful is that the door has always seemed to be not quite straight...as though it had to warp a tiny bit to close and lock.


The problem you have already identified could be the door switch is not closing when you shut the door. Please confirm your dishwasher is KUDP02I (i and not 1).\015\012\015\012One way to check is find out the door switch on the door panel ... KitchenAid Dishwashers

The door that releases the detergent in a Maytag Jetclean Dishwasher EQ Plus is not opening. The prewash side has openings that allow the detergent to dissolve, but the main wash side never opens preventing the dishes from getting washed thoroughly. Any ideas?


There is a spring mechanism that is located behind the flap, inside of the door of the dishwasher. You may have a spring broken in there. Take the plastic cover off the inside the door and examine ... Maytag Dishwashers

Noisy dishwasher my Kenmore quietguard 4 has developed an exceptionally loud hum/buzzing noise seemingly coming from the door of the dishwasher, when closed, locked and put on either drain or wash cycle.If the unit is allowed to sit for 1-2 days, the drain cycle will empty the tub without the buzzing noise starting. If anything else is attempted afterwards, like a wash cycle, the noise immediatley starts at a low level, then becomes steadily louder, until the full volume is reached, and does not


I have aloud buzzing nose and humming what is the problem ... Dishwashers

The power went out and we cant use the reset button to get the alarm to go off. The error says 8. When the power went off it was not washing dishes and the door was not locked. Dish washer Model KDS-17A Thanks, Todd


I would try unplugging it for 30 minutes .. ... KitchenAid Dishwashers

I have a Maytag MDB7100AWW dishwasher and there's a "3 sec" button on the left that is on. When I try and push "normal wash" the "3 sec" button will flash 5 times then it will stay lit. It will not allow me to use any of the other buttons as well. It will not let me wash any dishes. What is wrong?


Sounds like child lock.Have you tried holding the button that shows the 3 with the padlock for 3 seconds? ... Maytag MDB7100AWB Dishwasher

My Kenmore Elite dishwasher doesn't wash dishes properly. I think that it is not getting enough water in the machine. It only allows about an inch of water to get into machine and then starts. I do not think that there is enough water to spin wash arms. I have 40 PSI coming into the house. I am on well water and found debris in the intake orfice. I did my best to flush. Could it still be bad?


I am having the same problem with my brand new Dishwasher. ... Kenmore Dishwashers

My lock light is on and I can't "unlock" it. How do I get the lock off, so I can wash dishes.


Press the lock button for 3 seconds. find a lock icon on panel ... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1544 seconds