Having problems with your KitchenAid 24 in. KUDS25SH Built-in Dishwasher ?

My KitchenAid dishwasher (KUDS25SH) start and stop

\015 My KitchenAid dishwasher (KUDS25SH) will run for a few minutes, stop, start, stop, etc., never getting through a cycle. While stopped the Child Lock light flashes\015

Answers :

MY KUDI25 CHWH1 has the exact same problem...I'd love to hear about a fix!
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My KitchenAid dishwasher (KUDS25SH) start and stop


MY KUDI25 CHWH1 has the exact same problem...I'd love to hear about a fix! ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a KitchenAid KUDS02SR dishwasher. If I push any buttons on the control panel the Normal light starts flashing rapidly and will not stop no matter what I do. While this is happening it will not start a cycle. If I turn off the power the light will stop flashing, but when I push any other button the Normal light starts flashing again.


The touch panel may have a bad push pad and will not let it probram there is a tech sheet under the dw just behind the toe panel this wil help you understand the flashing code . it will tell you what is wrong . but a ... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

Own a KitchenAid dishwasher, model KDC-21AD. Unit stopped shortly after startup cycle began. When cycling thru the various wash cycles, I hear a slight hum when selector switch is at the "pots/pan" selection. About 2" of water is standing in base of dishwasher and it will not start. Checked the KitchenAid site and they do not list my dishwatcher. Would like to be able to repair myself or have it done at reasonable price.


... KitchenAid Dishwashers

KitchenAid Dishwasher - Model KUDP02CRBS1 - the dishwasher stop working and the normal light starts blinking. Plug/un-plug several times w/o any fix. Is there is any auto diagnostic I can run before calling the repairer experts?


... KitchenAid 24 in. KUDI01TJ - Multiple Color Built-in Dishwasher

KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher: Just stopped working before Christmas. I had washed a load a day before, and the next day I couldn't use the Rinse Cycle. The lights turn on for Normal and Heavy, but nothing happens when I press Start. I played with the breakers a couple times, to try to "reset" the machine, but it didn't do any good. I really don't want to be spending a lot of money on that dishwasher, especially after reading all the horror stories abo


... KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher

I have a kitchenaid dishwasher model kuds24se with a problem. I MUST hit cancel before I hit start. Note that it doesn't matter how long it's been since the last cycle. It could be a few minutes or a day or more. I have to hit start to get a complete wash cycle. If I don't hit cancel, the washer goes through some sort of cycle and stops. It seems like a normal cycle but of course it is not because I don't hear any water and, upon completion, when I open the door there is heat but the soap dispen


... KitchenAid KUDS24SE Built-in Dishwasher

I have a KitchenAid drawer dishwasher model kudd01dppa and it has a mind of its own starting and stopping in the middle of the night/day and chiming all different beeps and sounds like its computer is glitching out. We had a service person out and they changed the main computer board and it seemed to fix it for a few days then started again. They gave up. They also tried some sort of reset or reboot but nothing has fixed this intermitten but long term problem. Any ideas?


"it seemed to fix it for a few days then started again" (sic) OK, well if this is so, then in my experience you are getting some, sort of Power Bourne Spike, Surge, or Transient, problem. If there is nothing else it can possibly be. Use a Pow ... Dishwashers

KitchenAid KuDS301XBL6. After cycle has run. I unload dishwasher and shut the door and the machine starts "draining" again. Only way to stop it is to open the door slightly. If I bump it it starts


... Dishwashers

I have a Kitchenaid Dishwasher M/N KUDS25SHWHO. Had to replace the control board because the unit would not start. Installed the new board and the unit now operates, but not correctly. Once in awhile on the Normal cycle, it will get a third of the way through the cycle and just stop. Used to be, you could hit any of the Wash Selection buttons and than any of the Options butons and then hit the Start button to begin the cycle. Now, as soon as you hit one of the Wash Selection buttons, the un


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Kitchenaid dishwasher kuds25sh start button not working


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I have a kitchenaid dishwasher, model KUDC03IVBL4 that has stopped in the middle of a cycle. It is completely dead. Not sure where to start to find the issue.


... KitchenAid KUDC03IVBL Builtin Dishwasher

Kitchenaid 2 drawer model 528824. Dishwasher beeping non stop and continues to self start.


... KitchenAid Dishwashers

I have KUDK01ILBS6 kitchenaid dishwasher. Last week the cancel light kept flashing and I could not reset. Finally reset worked, but now dishwahser stops washing as soon as I start it. Do I need a new electronic control assemby?


... KitchenAid Dishwashers

I have a KitchenAid dishwasher model KUDKO31TWHO. Only the cycle light comes on blinking but will not allow me to start the cycle.All it does is blink. I throw the breaker to get it to stop and try again but nothing works. Help


... KitchenAid Dishwashers

My kitchenaid dishwasher won't start, no lights go on, it stopped in te middle of the cycle. The circuit breaker was checked and it seems fine.


... KitchenAid Dishwashers

I have a kudpo1flss6 series KitchenAid dishwasher that clean light is staying on it blinks 7 * times over and over not stopping, start button not working push Cancel button and motor runs for about 5


... Dishwashers

I have a KitchenAid dishwasher, KUD? which is about 9 years old. I will start with the fact that I have EXTREMELY HARD water, no water softener in the house... So, I have tried MANY different detergents, now use Finish with the ball in the middle, but still, I get these RUST stains on ALL my stainless steel dinnerware, even if they are NOT touching in the racks. How do I stop this staining and how can I remove the stains from ALL my stainless now?! Please help! Thanks!!!


... KitchenAid KUDR24SE Built-in Dishwasher

AP3775964 BOARD FROM A KITCHENAID DISHWASHER MODEL KUDS01ILWH6, THE START BUTTON STOPPED RESPONDING AND THE DIODE IN SLOT C113, MARKED 391 IS NOT GETTING A READING AND IN SLOT Q6 THE MIDDLE TERMINAL IS NOT GETTING A READING OFF EITHER OF THE OTHERS. CAN EITHER OF THESE BE THE PROBLEM, AND IF SO CAN YOU TELL ME WHAT THE RATINGS ARE SO I CAN REPLACE THEM.


... Dishwashers

Kitchenaid KUDS01FL -Dishwasher - "clean" light wont stop flashing; cant start a new load


Hi,\015\012\015\012\015\012The clean light usually will blink due to a failure to heat the water properly. This dishwasher looks for a temperature rise of the water during a heating cycle if it fails to see this rise for multiple cycles i ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My Kitchenaid dishwasher Model KUDPO1FLSS3 stopped working. The electrical works, as we checked the breaker and the little lights on the panel turn on, but the machine will not start. We're thinking there might be a problem with the connection where the door closes. We've checked out everything we can think of, but no luck. The plastic panel is worn away in places, so some of the buttons are exposed-can't imagine that matters, though. Help!


... KitchenAid Dishwashers

I have the kitchenaid dishwasher model #kudv03ctss0.the clean light stay blinking and when i hit the start it just blinks and then stops but the clean light stay blinking constantly.if i hit the cancel button i hear a um noise as if it going to turn on but nothing happens and the light stays blinking. what do you think might be the issue .


Dear friend,\015\012ngfam at you service! happy to assist!\015\012It's an electronic problem!The lights are called codes and need to be diagnoed by a factory service person!!We sell appliances for 65 years an ... Dishwashers

I have a kitchenaid dishwasher model kudio1tjwho. It filled and stopped working. I can not cancel or change the cycle. I press start and it washes for about 30 seconds and shuts off. All the other buttons flash when pressed.


... KitchenAid Dishwashers

My KitchenAid dishwasher model KUDS01LBS5 stopped working. no lights on, wont respond to start button or cancel. Water was left in the tub from last successful wash. breaker panel looks ok. Any ideas?


First thing to always do on a dead dishwasher complaint is to verify\015\012that power is available at the power junction box in the dishwasher. Remove the kickplates (at bottom of dishwasher), then open the junction box cover and, see if the wire co ... Dishwashers

Kitchenaid dishwasher The clean light was flashing 7 times, so I did read and try the solution SaniRinse-EnergySaverDry-SaniRinse-EnergySaverDry and this did get the machine to unlock and start up. Thank you! But I'm noticing that no watre is going into the machine. I can hear it drain some water. It is very hot and steamy in the machine so no heater problem, but I don;t see any of the soap on the bottom of the machine rinsing away. I'm afraid its stopping because the motor is overh


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1906 seconds