Having problems with your KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher ?

Kitchenaid KUDSo3STSSO- Fills up fine but in the wash mode, loud noise. The screens and grinder are all clear and still makes the nose with them removed. Motor???


Answers :

Repair Help & Product Troubleshooting for KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kitchenaid KUDSo3STSSO- Fills up fine but in the wash mode, loud noise. The screens and grinder are all clear and still makes the nose with them removed. Motor???


... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

I have a Beko DE 6340 dishwasher. it was blocked in the pipe so stopped running, i cleared the blockage so that the water pumped out but now it still wont go even tho the lights are on and it still makes a noise as tho its going.


... Dishwashers

My kitchenaid fills with water just fine and drains just fine; however when I run it it makes this horrible buzzing/grinding sound. Could it be the food grinder or the pump? How do I clear the grinder to see if that is the problem?


You need to remove the lower spray arm, then the water volute that runs up the back needs to get disconnected by removing it from its rear clip (center of tub almost behind upper rack, next twist volute connector clockwise until you can pull the conn ... KitchenAid KUDR01TJ Dishwasher

My KitchenAid dishwasher (model KUD101TJWH0) suddenly is making noise from the motor area while inputing water into the unit, whether in the rinse or washing cycles but makes no noise in the draining cycles. I have pulled the unit out while still connected, cleaned any debris from the filter screen below the lower water spokes and can hear the noise very plainly by the motor but I know how sound can travel with the piping. Is the sound only coming from the electric drive motor attached to the


... KitchenAid Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

Husky HU80722 model Water flows thru the washer. Have disconnected all hoses, checked filter screen it is clear. Reconnected hoses, Engine runs fine home water pressure fows through washer. Still not producing any pressure.


... Northstar Pressure Washer 3000 PSI

My boys are helping now but they don't rinse off plates first. Now the dishwasher is acting like it's not cleaning very well. I'll take the dishes that have stuff on them still and soak them and then put them back into the dishwasher. Are we filling it to full, I make sure the uper rack is clear on the bottome of it for the water jets to work. I was thinking about running some vinager through it. would that help with maybe some cloged areas


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

I have a Bosch SHX46A05UC14 dishwasher. The dishwasher is in a new home I just purchased. I tried to run the dishwasher on a normal cycle. However, when I push POWER and NORMAL CYCLE it makes a buzzing noise...and that's it. I opened the dishwasher and on the base of the dishwasher there was a screen that could be removed. I noticed that there was still some anti-freeze fluid in there (because the house was winterized). Could there be a simple solution to this problem?


... Bosch 24 in. SHU43 Built-in Dishwasher

The unit goes through its cycles but the top rack is not getting clean. The bottom spray wheel works, the middle and top spray arms are getting water but it seems not enough to make them rotate. The pump screens are clear and there seems to be enough water. Whats going on?


The problem is likely to be that the jets in the rotor arm are blocked.\012\012To check this, remove the arm (it is easy to do, as it is intended for the user to do this) and clean out all the holes. Try running water from you tap through ... Dishwashers

I have a Quiet Guard Standard model #587.151524 that is not cleaning the dishes. I took the bottom spray arm and screens out and cleaned them, (they had a heavy buildup of what I would say is calcium. The arm cleaned up fine but the screen still has some areas that will not allow the water to drain. I tried CLR and it helped but the screen is still probably 60% clogged. Do you think this is the problem getting the dishes clean and if so do you have any suggestions about how to clean the screen?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Kenmore 24 in. 15689 Built-in Dishwasher

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Hi i have a bosch model no sgs53e02au australia 2 weeks ago put a wash through over night woke up in morning noticed still making noise opened up the door of dw still making noise sort of brrrrr noise constant not stopping unless press botton off would turn off still had water in bottom rang company they told me to clean filter which i did found glass particules took water out with sponge clean it rang back they told me to get a piticuler tool size 20 to unscrew and pull out pump sat there unscr


... Bosch Dishwashers

Dishwasher problem The cycle is done but still making a noise like its draining. Turned it off but when turned on again still makes sound like water is trying to drain out


... Thermador DWHD64EP Built-in Dishwasher

I have a MDBH945AWW that is just over one year old. It has just started making a various new noises. Grinding, loud buzzing and such. Still cleaned the dishes and completed the full cycle. I followed the solution that bgreenatown gave for removing obstacles. Found some soft material but did not seem that it would cause an obstruction. Removed it and put it back together but it is still making noises. Any next steps?


Hi,\015\012This soound is from the pump assembly. Looks like the "CHOPPER ASSEMBLY". Try to pull the pump apart and take a look.Go to www.sears.com and put in your model number, ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

I changed 2007 honda pilot alternator and serpentine belt, now the engine is making noises kind of like engine knock. I removed the belt and engine is still making same knocking noise.


... Honda 2007 Pilot EX-L 2WD

Bosch dishwasher Over the weekend my drains backed up into the dishwasher. After cleaning the drains I ran the dishwasher 3 times. Under the screen there is still about an inch of water. I never noticed this before because I never removed the screen before. Can you tell me if this is normal or is there a problem with the dishwasher. The water in the little area below the screen is clean.


Its normal. its there to keep moisture around the rubber seals so they dont dry out. ... Dishwashers

When starting wash cycle the dishwasher cda cw447 doesnt appear to be getting enough water in and is making a droning / whirring / electrical ? noise. pipes all connected ok inc aquastop water supply unit, no kinks etc. machine 3 1/2 yrs old, just started making this noise. appears to complete rapid cycle but still making unusual sound. water drains away fine from this cycle, dont believe pipes / hoses are blocked.


Try removing the inlet pipe, and refitting, might fix it, else likely that the \015\012Inlet water soleniod failing/failed or tiny mesh filter (it does come out for cleaning) behind the inlet hose clogged. Temporaily bypass the aquastop water s ... Dishwashers

The height adjuster clips broke off & apparently fell into the grinder, making a loud sound when turned on. How can I get the plastic out of the grinder?


... Samsung DMT800RHS Dishwasher

I have a Bosch SHU43C06UC/14. A few weeks ago it was making a loud terrible noise during the entire cycle. We figured it was on its last leg but it was still cleaning the dishes properly. Then with no explaination the noise stopped and the machine sounded normal again. Today when I started the machine it makes the normal sound when starting, but it acts like it is stuck at the beginning and does not fill with water. The timer also does not count down.


... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Maytag MDB7100AWW dishwasher that makes a lot of noise from the motor at the end of the drain cycle. When there is water in the dishwasher it doesn't make any noise and washes well. This url (http://www.applianceaid.com/maytag-dish-noise.html) describes my problem exactly but I can't remove this part. I have unscrewed the 3 screws keeping it in place but it seems to be still attached to the motor. How can I remove it?


... Maytag MDB7100AWB Dishwasher

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

I have a Whirlpool quiet partner III dishwasher that began to make a loud scratchy noise when the cycle started. This went on for a few months but it was still cleaning the dishes. Last weekend we tried it and it just kind of stopped---there is a kind of buzzing at the point when the cycle should start and then it does nothing. It does still drain of the cancel cycle. What does this sound like


There could be some debris obstructing the spray arm assembly from turning freely, puting extra working load on the motor and it now started to cut off(thats why you get the buzzing noise) since the motor also activates the water pump(reversible) it ... Whirlpool Dishwashers

The motor makes a weird whirring loud noise but the gears seem to be turning still the arms are still turning and the water is going in fine it seems to be any time the dishwasher is on and in any cycle. please help!!!!


So it turns out that it was the disposer blades right behind the motor that were causing the problem. I took the filter off of the drain and found I had a piece of glass and a plastic army man gun trapped in the filter to the drain that the blades we ... GE GSC3400G Built-in Dishwasher

I have a Bosch SHU43C06UC/14. A few weeks ago it was making a loud terrible noise during the entire cycle. We figured it was on its last leg but it was still cleaning the dishes properly. Then with no explaination the noise stopped and the machine sounded normal again. Today when I started the machine it makes the normal sound when starting but it acts like it is stuck at the beginning and does not fill with water. The timer also does not count down.


... Bosch 24 in. SHU43 Built-in Dishwasher

G7856 showing Fault Code F26. Have cleared filters of all debris, including drain impellar (sp?) cover. Code still not clearing. What do I do next?


Hello there again I dont know if you got disconnected or just left the chat room but please try this take out the bottom white basket so you can see the\015\012bottom inner of the dishwasher, then take out the centre filter and\0 ... Miele 24 in. G638 Plus Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0925 seconds