Having problems with your KitchenAid Architect® KUDC03IT Built-in Dishwasher ?

Machine won't start

\015 I hit start, the light turns solid green and then starts blinking and the machine never turns on\015

Answers :

This unit has a safety feature. You must close the door within 3 seconds of pushing start. So push start then immediately close the door wait for a few minutes and it should be running.
Repair Help & Product Troubleshooting for KitchenAid Architect® KUDC03IT Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

IDL700 wont start Kept getting error message to say there was a blockage. Checked all the pipes and pump, all fine. Now the blockage lights are out, but the machine wont start at all, just beeps when I press the start button, then nothing


Sorry to read about your problem, I hope this helps you out.the blockage, maybe inside the pump of the unit, or at the check valve.I suggest you contact a service company..I tried to help you. Please help me and Ra ... Indesit 24 in. IDL700 Built-In Dishwasher

Beko washing machine wm5100w my washing machine wont work it wont start and and the ready and wash dots keep flashing and the spin and end one stays on thanks


... Dishwashers

Hi, I have a Dishlex dishwasher. It's an electronic model, from about 92 I think. The model I thought was B8557WW. It is very hard to see the model number because it's almost washed away. Is the model number maybe located anywhere else on the machine? Could there be a manual or circuit diagram hidden somewhere on (in) the machine? The fault is that it wont start. It reacts to some of the front buttons, and beeps, but not all, and not the start button. Before it stopped working completely, some o


... Dishwashers

Whirlpool adp 5550 Dishwasher wont complete a cycle. The light in the start button flashes four times in a continuous pattern. Have pressed the start button for 3 -5 seconds to reset after which the machine seems to operate ok then it stops and the start button returns to flashing. Have cleaned the filter and checked the sullage pipe for blockages What do I do next?


... Dishwashers

Buzzer machine wont start 6 flashes.G2PDWI


... Whirlpool Dishwashers

Power Light Flashing - Machine wont Start - Whirlpool ADP5966


This is a fault code. it will flash so many times and then pause.\015\012let me no how many flashes before the pause and i will tell you what fault code it is ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Liverpool area Tap symbol lit on cycle display and machine wont start. a level of water is present in machine base.


... Bosch 24 in. SHV55M03GB Built-In Dishwasher

My dishwasher 'start" button won't kick in. The machine seems to think it isn't locked - light wont activate, but the door IS locked. I select the cycle and option, but when i push start, it won't stay, The "clean" button keeps flashing. This is 5 years old


Hi,How many Blinks are there?Is it 7 Clean Light Blinks?Let me know, so that we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Kenmore 24 in. 17032 Built-in Dishwasher

This is a top loader machine with no transmission and every 20th load starts chirping and throws water over the top of the tub ge wont admit problem but i got six that says diffrently machines have had new motors and mode shifter


Hi,\015\012 \015\012A chirping noise means that the motor bearing wear. This can also be checked for by taking the belt off and running the motor alone. The spilling of the water is a result of the drum rot ... GE Nautilus 24" Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Miele premier dishwasher inlet/outlet red light on. machine wont start. Pool pf water on bottom of machine


... Miele Premier-Plus Built-in Dishwasher

I hit the start button and the machine wont start.


... Admiral DDB1501AWW Dishwasher Replacement Door Handle Repair Assembly DWD1500AWW

Kenmore model # 587.15103801 - I select wash cycle , heat dry button and select start all buttons i selected flash and machine wont start wash?


... Dishwashers

ASKO dishwasher D3122 drain pump wont stop pumping and the machine wont respond when we press any of the program or start/stop buttons. the program light is flashing. We can turn the power off with the main switch on top of the door but when turning it back on the pump starts pumping again. please tell me how to fix this problem so we can get it up and running again.


... Asko D3122XLSS Stainless Steel Dishwasher

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

My dishwasher keeps blinking the "clean" light and will not start. I have tried turning off the breaker to reset the machine but it still wont start even after pushing all the buttons.


... Kenmore 24 in. 16049 Built-in Dishwasher

WONT WASH CLEAN ALWAYS RESIDUE LIKE SAND ON GLASSES ETC. THAT IS ALMOST IMPOSSIBLE TO EVEN REMOVE BY HAND WASH ENOUGH SALT AND RINCE AID ALSO CLEAN FILTER EACH TIME NO OBSTRUCTION IN PUMP FILTER THOUGH HAS AN ORANGE COLOUR SALTLIKE SUBSTANCE INSIDE BRAND NEW MACHINE STARTED WITH BAD WASHING RESULTS AFTER COFFEE PLUNGER WAS NOT CLEANED PROPERLY AND GROUND COFFEE LANDED IN MACHINE ALSO POSSIBLY OUR HOUSECLEANER MIGHT HAVE USED ORDINARY TABLE SALT INSTEAD OF DISHWASHER SAL


Use CLR to remove any build up and then use LEMI-SHINE (walmart in dishsoap aisle) for the cleaning of your dishes. Works great for me as i have the worst well water on the planet. ... Dishwashers

Have a whirlpool ADP 951 and no manual for it. Is was working fine and now the red light in the left hand corner is on and machine wont fill. When I start it by holding the button on the right hand side in, it will drain for about 30 seconds and then stop and green start light flashes. Can anyone offer a solution?


Some mod have codes / could be suds lock or slow drain . i would ( if front loader ) clean out pump . hope this helps . **** ... Dishwashers

My GE Adora wont get the close clean, as a matter of fact it wont even get all of the cloths in the load dry. We have already checked the hoses to make sure that the water is not being blocked in any way at least up to the machine. HELP!! We're starting to stink!


Slightly confused here. Do you have a washer, a dryer or a dishwasher.\015\012\015\012Please provide the full model number to help understand the problem so that I can provide a solution . ... GE Adora GHDA656LSS Stainless Steel Built-in Dishwasher

CSD69 slimline dishwasher Water in machine wont drain. machine won't start on prerinse, just makes noise then moves on to wash cycle and prerinse light stays on, no water being let in either.


... Candy CSD69S Built-in Dishwasher

This is a machine wont start are a regular basis


Make sure there is spark on spark plug ... Homelite Pressure Washer. 2700 psi 2.3 GPM Gas Pressure Washer

3sec light stays on and the machine wont start


... Amana ADW662EA Built-in Dishwasher

Coleman clean machine 1500 wont start


... Coleman Pressure Washers

Less that 2 yrs old..door wont latch. As a consequence machine won't start.


It is possible the door latch is faulty or the springs at base of dishwasher are soft and need adjusting. the springs keep the door in position. refer ... KitchenAid KUDS30IXBL Builtin Dishwasher

I have a linea dishwasher model LDW 3SS i think it is about 3 years old , it used to start but not complete the cycle just stop halfway and then would only work if you slammed the door or pushed front of machine and now it wont work at all ???


Even though this is an old issue, I thought it would be good to close out.\015\012\015\012I had the same issue where the dishwasher would stop at two certain point in the program. If I'd manually advance past that point, it would keep goi ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1085 seconds