Having problems with your KitchenAid Dishwashers ?

KitchenAid KUDS01 Starts then stops ...

\015 Dishwasher starts, in the first minute the pump runs and drains out water, after another 2 minutes, dishwasher stops and all lights go out on the control panel.\015\012\015\012Does this no matter what cycle option(s) are selected.\015\012\015\012Tried recycling the power. No help.\015\012\015\012Strange that the first thing that the dishwasher does 'drains out' first...\015\012\015\012All help appreciated !\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

KitchenAid KUDS01 Starts then stops ...


... KitchenAid Dishwashers

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a KitchenAid KUDS02SR dishwasher. If I push any buttons on the control panel the Normal light starts flashing rapidly and will not stop no matter what I do. While this is happening it will not start a cycle. If I turn off the power the light will stop flashing, but when I push any other button the Normal light starts flashing again.


The touch panel may have a bad push pad and will not let it probram there is a tech sheet under the dw just behind the toe panel this wil help you understand the flashing code . it will tell you what is wrong . but a ... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

KitchenAid KUDL03IVWHO Machine seems to stop after the initial water fill. There is power to the machine, the door latch circuity is working, all the buttons on the control pad light up. After selecting any of the wash cycles and pressing start, the washing light illuminates and the machine fills normally to the point where the fill valve stops the inflow of water. At this point the machine stalls, it does not start the cleaning process. I can press cancel and the machine drains normally. I e


Hi,\015\012\015\012You have got to the correct resolution. This is a circuit or most commonly called the board problem. Please find the bellow mentioned link which will help you to get one compatible for your washer.\015\012\0 ... Dishwashers

My KitchenAid dishwasher (KUDS25SH) start and stop


MY KUDI25 CHWH1 has the exact same problem...I'd love to hear about a fix! ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Kitchenaid Model KUDS301XWH4 won't start after pushing normal cycle and start. Lights blink and beeps eventually stops. child lock is not the issue


... Dishwashers

I have a Kitchenaid Dishwasher M/N KUDS25SHWHO. Had to replace the control board because the unit would not start. Installed the new board and the unit now operates, but not correctly. Once in awhile on the Normal cycle, it will get a third of the way through the cycle and just stop. Used to be, you could hit any of the Wash Selection buttons and than any of the Options butons and then hit the Start button to begin the cycle. Now, as soon as you hit one of the Wash Selection buttons, the un


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Hi i have a Kitchenaid 24 in MODEL KUDIO1IL8L5 TYPE 577-0 problem is 2fold 1st,after starting 2minutes in a grinding noise from down below starts then stops when water starts.2nd we now have a rumble noise between cycles.thank you for the help. PETE


Ok, I don't have the same dishwasher, but it is a kitchenaid, and it had the same symptoms.\015\012\015\012most dishwashers have a food grinder under the strainer. as the water is forced past a wheel and sprayed up on your dishes, the wh ... KitchenAid Dishwashers

I have a kitchenaid dishwasher model kuds24se with a problem. I MUST hit cancel before I hit start. Note that it doesn't matter how long it's been since the last cycle. It could be a few minutes or a day or more. I have to hit start to get a complete wash cycle. If I don't hit cancel, the washer goes through some sort of cycle and stops. It seems like a normal cycle but of course it is not because I don't hear any water and, upon completion, when I open the door there is heat but the soap dispen


... KitchenAid KUDS24SE Built-in Dishwasher

Hello, Our kitchenaid DW has stopped working. Non of the buttons cause a any of the lights to turn on. Of course, it will not start. On its last working cycle, it had a very strange washing cycle. It almost sounds like the water was not splashing around (even though I opened it while it was working and noticed water at the bottom). I checked the circuit breaker, and it is not tripped. For a couple of weeks, the DW had started making a kind of metallic noise while in the washing cycle. Also,


It is nice to see a problem described with such a depth of observations. It helps in closing on to the possible causes of the problem.\015\012\015\012For the moment let us make sure there are no remnants of the glass left in the dishwashe ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a KitchenAid KUDI24SEWH2 diswasher I can start it with purshbuttons, it starts and then stops without finishing a cleaning cycle. Any ideas as to the problem? Is there a reset button? I've unplugged it and replugged with same results. Thanks confused


It may have something to do with it not being completely level. This interrupts the cycle. Also, if the door latch is not closed properly that can interfere with a complete cycle. If it is out of sync then you would have to unplug the computer boa ... Dishwashers

KitchenAid KuDS301XBL6. After cycle has run. I unload dishwasher and shut the door and the machine starts "draining" again. Only way to stop it is to open the door slightly. If I bump it it starts


... Dishwashers

I have a KitchenAid drawer dishwasher model kudd01dppa and it has a mind of its own starting and stopping in the middle of the night/day and chiming all different beeps and sounds like its computer is glitching out. We had a service person out and they changed the main computer board and it seemed to fix it for a few days then started again. They gave up. They also tried some sort of reset or reboot but nothing has fixed this intermitten but long term problem. Any ideas?


"it seemed to fix it for a few days then started again" (sic) OK, well if this is so, then in my experience you are getting some, sort of Power Bourne Spike, Surge, or Transient, problem. If there is nothing else it can possibly be. Use a Pow ... Dishwashers

Own a KitchenAid dishwasher, model KDC-21AD. Unit stopped shortly after startup cycle began. When cycling thru the various wash cycles, I hear a slight hum when selector switch is at the "pots/pan" selection. About 2" of water is standing in base of dishwasher and it will not start. Checked the KitchenAid site and they do not list my dishwatcher. Would like to be able to repair myself or have it done at reasonable price.


... KitchenAid Dishwashers

Kitchenaid does not do the program, I can start the program, but about 15 minutes into the program the program stops and the light jumps to clean light which it 7 times blinks pauses and 7 times b


Clean all the buttons , one must be stuck , push all the buttons and un stuck them.... ... KitchenAid Dishwashers

My KitchenAid dishwasher model KUDS01LBS5 stopped working. no lights on, wont respond to start button or cancel. Water was left in the tub from last successful wash. breaker panel looks ok. Any ideas?


First thing to always do on a dead dishwasher complaint is to verify\015\012that power is available at the power junction box in the dishwasher. Remove the kickplates (at bottom of dishwasher), then open the junction box cover and, see if the wire co ... Dishwashers

My Kitchenaid dishwasher Model KUDPO1FLSS3 stopped working. The electrical works, as we checked the breaker and the little lights on the panel turn on, but the machine will not start. We're thinking there might be a problem with the connection where the door closes. We've checked out everything we can think of, but no luck. The plastic panel is worn away in places, so some of the buttons are exposed-can't imagine that matters, though. Help!


... KitchenAid Dishwashers

KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher: Just stopped working before Christmas. I had washed a load a day before, and the next day I couldn't use the Rinse Cycle. The lights turn on for Normal and Heavy, but nothing happens when I press Start. I played with the breakers a couple times, to try to "reset" the machine, but it didn't do any good. I really don't want to be spending a lot of money on that dishwasher, especially after reading all the horror stories abo


... KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher

My kitchenaid dishwasher won't start, no lights go on, it stopped in te middle of the cycle. The circuit breaker was checked and it seems fine.


... KitchenAid Dishwashers

Kitchenaid kuds01dj model. washer fills with water then stops and then the motor hums and does not seem to engage. after a couple of minutes water drains out and the fill process starts again. as before motor hums gets really hot but doesnot engage. does this mean i need a new motor, capacitor? please help


... KitchenAid KUDS01DJ - Multiple Color Dishwasher

Kitchenaid KUDS01FL -Dishwasher - "clean" light wont stop flashing; cant start a new load


Hi,\015\012\015\012\015\012The clean light usually will blink due to a failure to heat the water properly. This dishwasher looks for a temperature rise of the water during a heating cycle if it fails to see this rise for multiple cycles i ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a kitchenaid dishwasher model kudio1tjwho. It filled and stopped working. I can not cancel or change the cycle. I press start and it washes for about 30 seconds and shuts off. All the other buttons flash when pressed.


... KitchenAid Dishwashers

Stopped Dead I have a KitchenAid model KUDM01TJBS1. We started the machine and it partially filled and then went dead. Has power to machine but no response. Any ideas?


Thermal fuse attached to control board. it is white in color. You should have power at both terminals on this part. ... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

I have the kitchenaid dishwasher model #kudv03ctss0.the clean light stay blinking and when i hit the start it just blinks and then stops but the clean light stay blinking constantly.if i hit the cancel button i hear a um noise as if it going to turn on but nothing happens and the light stays blinking. what do you think might be the issue .


Dear friend,\015\012ngfam at you service! happy to assist!\015\012It's an electronic problem!The lights are called codes and need to be diagnoed by a factory service person!!We sell appliances for 65 years an ... Dishwashers

I have a KitchenAid dishwasher, KUD? which is about 9 years old. I will start with the fact that I have EXTREMELY HARD water, no water softener in the house... So, I have tried MANY different detergents, now use Finish with the ball in the middle, but still, I get these RUST stains on ALL my stainless steel dinnerware, even if they are NOT touching in the racks. How do I stop this staining and how can I remove the stains from ALL my stainless now?! Please help! Thanks!!!


... KitchenAid KUDR24SE Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1116 seconds