Having problems with your KitchenAid Dishwashers ?
Door spring broke
\015 Dishwasher has been used for 2 1/2 years. The door broke and is very heavy to hold up.\015
What is the model number? If you go to this website, you can see what part to order and how much.
Repair Help & Product Troubleshooting for KitchenAid Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The spring on the door broke (loud sound) and now the door is heavy and doesn't stay up unless we latch it each time. How do we find instructions for installing a new spring?
Its hard to find instructions but go to sears parts direct and order parts .you will see the location of the parts and a image that should put uyou in the right direction ... Frigidaire PLDB998A Built-in Dishwasher
KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b
Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
Door spring broke (I think) door is now very heavy how do I replace springs. Thanks Jerry
... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher
Kenmore Elite Dishwasher model 665.1379. Door falls open. We think the spring broke. Does this model have a door spring balance kit?
Door spring rope broke on door , door falls when opened like to fix it need part and diagram of unit
Http://www.bosch-eshop.com - enter the correct model number: SHE43P05UC in the search box on the right side, select which dishwasher you have from the results list. Click on the ... Bosch Dishwashers
GE GSD900L-02 Door spring cable broke
Get 2 of the same springs part # PS259673 DOOR SPRING (YELLOW) (Heavy Duty Door Spring) ... GE Dishwashers
Door spring on dishwasher broke
I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-\015\012 ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher
I heard metal drop sound when dish easer door was open in down position. Seems that door does not close same way- it there a spring on door to help close that could have broke? Y I have the kitchen aid - kud102frsso. Thanks
... KitchenAid 24 in. KUDI02FR Built-in Dishwasher
Dishwasher door When I opened the door I heard a pop and now the door drops to the fully open position. It used to stay as open as I pulled it, but now there is no tension as if a spring broke.
You're right a spring has either snapped or come off of it's anchor point. Should be 2 ...one on each side of the door. you can order parts on line at several appliance replacement part suppliers... have your make and model so you'll get the right pa ... Kenmore Dishwashers
The door spring must of came loose or broke off.The door falls open if you don't hold it as you open it. Before I start dismantling the dishwasher to repair this is it inside the door or on the side of the dishwasher.
You can probably change that from the underside Dave. But you may need to pull the unit out. It should be exposed from the side ... Jenn-Air JDB6510 Built-in Dishwasher
I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that
Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers
Spring on door is broke. do I need to pull
The door springs are located at each door hinge and connect to the frame body along each side of the dishwasher. If you remove the lower toe panel directly below the door you should be able to see them. However, in order to access them to repair/re ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher
The spring on the door broke. How do we fix it?
Get a spring from a kitchen aid parts supplier and relace it ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
I have kitchenAid KUDM24SEWH5. The door opens with no resistance. I assume the door spring came loose or broke. How do I check this out?
If you remove the toe kick panel and look at either side of the machine you will see a lower frame rail near the floor. If you look at the upper and lower edges of the toe kick you should see 2 or 4 screws which are typically used to hold it on. Unde ... KitchenAid Dishwashers
Maytag dishwasher door spring repair where do the clips and springs go they both L&R broke at once so i dont know how they are placed in the unit
When lowering the door of the Bosch shx46l15uc dishwasher, something snapped. The door is heavier so I am guessing a spring or something broke. Is this an easy fix?
... Bosch SHX46L15UC Dishwasher
The door springs broke. I got new ones but don't know where to hook them to the frame from the door hook.
Hi .thanks for the question . sometimes you have to un install the dishwasher, just a bit, to rep[lace the springs. remove the screws that anchor the dishwasher, pull out the dishwasher just a bit ,till you see where the springs at ... Dishwashers
The cable to the door of my GE Potscrubber 900 dish washer (model GSD900L-02) broke. I purchase the replacement cable and now need to know how to reinstall this new cable. The replacement parts include two cables and two springs. Can you provide a "visual" of how this cable connects to the lower left corner of the door???
Question, my cable just broke yesterday. Where did you buy the part? ... Maytag Dishwasher
Kitchenaid dishwasher KUDK02CRBS the spring on the door broke? Is this a easy fix, where do you access the spring
Turn off the power to the dishwasher.Remove the access cover on the bottom front of the dishwasher.Lying on the floor,you can see the door hinges and replace the spring. ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher
Dishwasher model number 363.1479580. the door will not spring back up. The spring broke and I bought a new one I can't figure out how and where to attach it pLease help
... Kenmore Dishwashers
Door latch broke and is in funtioning to ge the spring back where it goies
Door spring broke
What is the model number? If you go to this website, you can see what part to order and how much.http://www.searspartsdirect.com/partsdirect/index.action?intcmp=xsite_Sears ... KitchenAid Dishwashers
Door springs broke
I have just changed mine and posted the solution with pictures here http://www.howtofixanything.co.uk/howto-260.html ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher
Tension spring on Frigidaire Gallery Series door broke.
... Hobart 41 in. AM14-255 Free-standing Dishwasher
The door spring on my Kenmore Limited edition 8542516 broke what part do I need and how do I fix it
Door springs usually don't "break" they iether get stretched over time or come off their mount...\015\012\015\012springs are adjustable and can sometimes be set to a tighter tension without pulling the unit out but that may be necessary.. ... Kenmore Dishwashers