Having problems with your KitchenAid Dishwashers ?

WE have a Kitchenaid model KUDE 70Cv washer that will not drain all of the water out


Answers :

Repair Help & Product Troubleshooting for KitchenAid Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

WE have a Kitchenaid model KUDE 70Cv washer that will not drain all of the water out


... KitchenAid Dishwashers

Kitchenaid kuds01dj model. washer fills with water then stops and then the motor hums and does not seem to engage. after a couple of minutes water drains out and the fill process starts again. as before motor hums gets really hot but doesnot engage. does this mean i need a new motor, capacitor? please help


... KitchenAid KUDS01DJ - Multiple Color Dishwasher

Maytag dishwasher- Model # WU 502 serial # 145 192 EP- 03 series Water builds up in the bottom of the dishwasher, does not overflow but will not go down. Nothing appears wrong in the drains. Dishwasher is connected to the kitchen sink drain. Tried a seperate rinse cycle but did nothing to eleviate the problem just made the water rise a bit but still did not overflow out of the washer. This washer is old and I cannot find the manual that came with it.


... Maytag 24 in. MDB6657 Built-in Dishwasher

Hello, I have a Kitchen Aid (model # KUDMO1T JWHO) dishwasher that runs the motor in all cycles, with water fill & drain working fine, but the pump is not pumping water during any cycle, as the spinners and the inside of the washer are dry when I open the door, except for the water sitting in the bottom. Also, no normal swishing sound of water when the motor runs in any cycle. Looks to me like a mechanical break in the pump drive. How do I check the pump drive on this model? Do you have any


... KitchenAid Dishwashers

There is water in the bottom of dish washer after finishing. If I start another cycle, everything drains, so it's not a problem with the hose. I hear water draining. I think it is the drain time. When the machine was under warranty, the service guy came and changed the drain time to longer. He told me how to do it, via the buttons, but have now forgotten where I put such great information. I have a 1996 built in model.


We have come up on this many many times. It is not drain time. There is a flapper in the drain hose located where the hose attaches to the pump with towels remove the hose and stick you finger in. It is and angled piece of rubber so it will be dif ... Whirlpool GU2400XTP Built-in Dishwasher

I have a whirlpool gold model GU1500 diswasher. When the rinse cycle ends the water pumps out into the garbage disposal like it should, but then water backs-up from somewhere into the bottom of the dishwasher. The overfill protection drain seems OK...the water doesn't overflow. It doesn't have a air gap on the sink. The drain hose goes directly from the dishwasher to the inlet on the garbage disposal. It appears to be properly installed per the installation instructions. The washer is about 4 ye


Seems you answered your own question here. You need to make an air gap in the drain hose - take as much slack as possible and make a curve (upside down U) under you sink as high as you can go. Make sure you clip ot to back of the cabinet to stabili ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Model number 66515632000 Kenmore Ultra wash with quite guard about 8 years old Washer stopped near end of rinse cylce, dishes look clean, water in washer did not drain and looks clean. All attempts to restart washer, or hit drain etc result in attempt to start and then it stops. sounds like trying to start a car with a very weak battery.


Unfortunately it sounds like you have one of two possibilities. A) You have something like a piece of glass or food ect. that has worked its way down into your pump and is tying up the impeller or pump as its trying to start. -To op ... Dishwashers

Ge model # gsc3200j01ww dishwasher. when the door latch is closed, nothing happens. motor does not start. if the timer is advanced to the next part of the cycle, water will spray into unit until float valve is triggered. water will not pump out, motor does not start. bailed out water, checked for stuck float valve-ok. removed drain screens and filters, cleaned. no motor, drain, or start. what parts should i check? always rinsed dishes before putting in washer. unit is portable or undercounter


... GE 25 in. GSC3200J Built-in Dishwasher

Dishwasher will not drain. power is ok drain hose is not plugged disconnected hose from drain plug was able to siphon smome water through Start washer, then press cancel, get a noise, probablely motor, but no water. Model MDB7600AWS serial 15416386ce


Hello. There are several possible causes for your problem. Let me briefly go through each one and then you may be able to zero in on your specific issue. I will try to include the fix for each. \015\012\015\012Drain line/air gap\015\012\015\0 ... Maytag Dishwashers

No water fill model g894 sc, fill washer with water and it will drain it out, drain not clogged. hear clicking from front panel, but solenoids at intake water pipe are not clicking


... Miele Touchtronic G894 SC Built-In Dishwasher

KitchenAid Model KUD101TJWH0 leaves 1/2" water; hit drain button


... KitchenAid 24 in. KUDS25 Built-in Dishwasher

I have a kenmore Ultra Wash Dishwasher, Model 15825691. We were recently hit by lighting. Once hit, the dishwasher started up. Since then, all cycles work, however, at the end of any cycle, the dishwasher continues to run and fill the bottom of the washer up to about two inches and then cuts off, so when we open the washer, there is approx 2 inches of water inside no matter what. I have pressed the "Cancel/Drain" button, in which drains the water after two minutes, but when that is finished, the


There must be a problem wit the fill valve. Check which valve the water enters. Check first the wiring to the valve of the water inlet or where the water comes out to fill the washer. Check for physical evidence of damage on the solenoid (or contr ... Kenmore 24 in. 16539 Built-in Dishwasher

I have a 8 year old Bosch dishwasher model # shu3032uc /14. There is no water getting in. I put water in, turn the dishwasher on and the water drains out. I do not see any water under the dish washer.


I have covered this in several previous solutions for Bosch dishwashers. I have copied the text below from a previous request for help, rather that write the entire thing again.\015\012 \015\012If this doesn't help, ple ... Dishwashers

Kitchenaid dishwasher model KUDM01TJB0 Fills with water, heats water but pump dosent run in wash (dosent spray water) Drains water. Every thin appears to work but the pump in the wash mode. I checked the control board and it has no visable issue.


... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

When the washer drains it comes out of the, what i thought was just the vent, on top of the sink next to the fouset knob. isnt the water supposed to drain into the existing drain for the garbage dissposal under the sink. we just bought this house with this problem. not sure of the model but figured that the drain would be the same concept.


... Kenmore 16529 Built-in Dishwasher

Hi i have a asko dishwasher the water will not enter the washer and the drain pump keeps going i have clecked the filer in the inlet do you think it could be water in the base lifting the float stopping the water inlet if so how do you drail the water out from the float? the model is d1706 thanks brian


Check this solution ... Asko 24 in. D3250 Built-in Dishwasher

I have a kitchenaid dishwasher model number kudso2sr and there is standing water in the bottom of the unit after the cycle is complete. The water will not drain. I ran another cycle and the water still remained. Please help


You may have a vacume issuealong side of the dishwasher itself there is a loop of drain hose to create a trap - inspect. also inspect where it is hooked up & follow where the drain hose goes to it's final connection to be sure there are ... KitchenAid 24 in. KUDS02SR Built-in Dishwasher

I have a Kenmore Ultra Wash Plus, Model # from door flange is 110753791. Washer fills with water, will not cyle through. Just a humming sound from the cycle timer dial but will not engage and start washing. I cannot drain the water by pressing ''cancel''


THIS SOUNDS LIKE A BAD MOTOR ... Dishwashers

I have a kenmore dishwasher model 14471.recently when i do a load the water doesnt drain normally,it tends to come out of the drain air gap on my sink when emptying.The washer still works but i am concerned


You need to open that airgap and glean it out. that way the water can flow into your drain ... Dishwashers

I have a Kitchenaid dishwasher, model KUDI01FLSS5. When I start the dishwasher, it wills with water, then gives out a low buzzing sound, and that is about all. The water heats up, and eventually drains out, but nothing more. What can be the problem?


Hi\015\012\015\012 \015\012\015\012If it fills with water as it was filling earlier and the\015\012quantity is fine then the issue is either with the ... Dishwashers

Frigidaire dishwasher Model: PLDB998AC0 Serial: TH15137742 Does not drain all water at end of cycle, so 1 to 2 inches of dirty water remains in bottom of washer


... Dishwashers

My KitchenAid dishwasher (model KUD101TJWH0) suddenly is making noise from the motor area while inputing water into the unit, whether in the rinse or washing cycles but makes no noise in the draining cycles. I have pulled the unit out while still connected, cleaned any debris from the filter screen below the lower water spokes and can hear the noise very plainly by the motor but I know how sound can travel with the piping. Is the sound only coming from the electric drive motor attached to the


... KitchenAid Dishwashers

Dishwasher i have a ge dishwasher i purchased two years ago. i have misplaced my owners manual. i can only tell you it is a ge quietpower 3. i don't even know the model since i've misplaced my owners manual. it started with the timer for speed cycle set itself between 50 and 60 minutes, and i knew that wasn't right. and then yesterday it did not drain all the water out. i know there is no food particles in it because i clean them before i put them in the washer and the drain line it is hooked up


Hi lilwing,\015\012\015\012I'm Harvey the Master Plumber.\015\012\015\012Your question is: you have a ge dishwasher you purchased two years ago. you have misplaced your owners manual. you can only tell you it is a ge quietpow ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Dishwasher won't drain. Water in bottom of tub. Washer hooked up through disposal, which was broken and just replaced. Currently, sink and disposal work fine but now tub of dishwasher won't drain. 24" stainless built in Model GLD6360L00SS


Hi\015\012\015\012\015\012Thanks for using FixYa. Hope you\015\012know that new disposals ... GE 24 in. GLD6360LSS Stainless Steel Built-in Dishwasher

I have a slimline dishwasher from Ikea. The model is Whirlpool DWH C10 W manual. Everything worked fine up until the other day when I switched the machine on and it made a noise as if it was working but nothing happens. No water comes into the washer although inlet pip looks fine. I have poured water in and it is drained okay but the dishwasher is not cleaning dishes. After checking through numerous forum and reading about a flood prevention switch which can be sorted by tipping the d


Ok so slow down and lets look at the d/w problem and don't take the kitchen apart.. in the tank there is a float in the front corner. lift the float and listen for the click that would be the float sw . if no click th ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1868 seconds