Having problems with your KitchenAid Dishwashers ?

Have a KUDS23HBO, filled it last night and cycle never moved off the Heating cycle. I went to Cancel, and it never moved off that cycle. Is the timer unir gone? Unit is 14 years old


Answers :

Repair Help & Product Troubleshooting for KitchenAid Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a KUDS23HBO, filled it last night and cycle never moved off the Heating cycle. I went to Cancel, and it never moved off that cycle. Is the timer unir gone? Unit is 14 years old


... KitchenAid Dishwashers

Maytag MDB6600AWW Unit is approx 3 years old it was finishing a load and stopped part way through sticking on heated dry. I don't know if it was there in the cycle or if the diagnostics on the board sent the message there. The light now will not shut off or move from the heated dry. I have disconnected 120 volts, removed the panel to check wiring, removed board and reassembled nothing resets the heated dry light and nothing works. I have gone through manual function test, sales floor demo test,


Have you tried pushing heated wash, heated dry, heated wash then heated dry? Sometimes this will reset it. ... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

Hotpoint Model HDA 3500N 10 BB Unit is only about a year old. The dial does not move. I noticed it when the washer was on for more than 3 hours and saw that the dial was still in the middle of the wash cycle. I then turned it to the rince cycle which operated there (not moving) until I manually moved it to dry. Did not move from there either. Thank you for any help you can give me.


HiThanks for using FixYa. From what you have described it seems to be an issue with the timer that has gone bad, they don’t often fail but if everything else is working fine then it is the Timer ... Hotpoint Dishwashers

ON REGULAR WASH CYCLE , WATER DOES NOT DRAIN FROM TUB AT END OF CYCLE. A FRIEND SAID I NEEDED NEW TIMER, BUT WEB SEARCH SAYS THERE ARE 2 DIFFERENT TIMERS LISTED FOR THIS MODEL AT ONE PRICE AND THEN DOUBLE THE PRICE FOR OTHER. DO I NEED TIMER, WHICH ONE. UNIT IS 13 YEARS OLD, WORTH REPAIRING ???


Hi,Typically when a dishwasher does not drain it is not due to the timer. The most common reason for it not to drain is a clog in the hose between the pump on the dishwasher and the outlet it drains into, like the pipe under the sink or g ... Magic Chef 24 in. DU4500 Built-in Dishwasher

We have a +11 year old Bosch SHU3006/UC/U06 that never leaves the wash cycle. We had to stop it during our last test run at 3 hours. Chat advise is suggesting a water temperature problem (I origionall thought the timer), suggesting that the cycle will not advance until it hits a set temperature (170 degrees). We checked and noticed that the water in the machine was only around 90 degrees during a wash cycle. We do not have exploded views or parts drawings, nor electrical schematics. I wou


Check continuity of the heating element to see if it is broken/open.\015\012\015\012The dishwasher prefers that the incoming water (water heater) be 120 degrees (F) ... Bosch SHU3036UC Dishwasher

Kenmore 587 I have a Kenmore 587.1414 that is only 2 years old. I can hear it filling with water and then after a while it will drain, but does nothing in between. After the cycle has ran completely, I can open it and the dishers have never got wet and the soap door is open but the soap has just ran down the side of the door. What could be wrong? Motor gone out?


I think you are right. That would be the most obvious answer. Some motors are warrantied for 2 years or longer. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

I have a Fagor LFF-021 dishwasher, two years old. It has not been used for some time. I have tried to start using it again, it washes fine, but won't move on to the drying cycle. Just keeps washing forever and never stops........... Any suggestions?? Many thanks


... Fagor LFA-65 Stainless Steel Built-in Dishwasher

Poor rinse Dishes and silverware are not rinsing properly. There is a grey film on everything when the cycle ends. The unit is 15+ years old. Should I consider replacing it? I'm afraid that the service manual is long gone. Thank you.


Make sure the water temp is at least 140 degrees and use FINISH TABLETS. ... Maytag 24 in. MDB3700 Built-in Dishwasher

Hello all, We have an Ikea Whirlpool DWF 416 that is a couple of years old and has never caused any problems. From today the door has stopped shutting properly. The electronics and internal mechanisms seem to be working fine, since when you turn it on the cycle starts - but only if you hold the door shut. Has maybe a catch gone? Any ideas for fixing a door-shutting problem like this? Thanks in advance! Dave


The catch is no longer working. Contact IKEA for the replacement part. I'm sure it's available through EBAY or something, but probably not guaranteed or as reliable. ... Dishwashers

Kenmore 74362 My model# is 665.74362400 this unit is only just over one year old. My problem is it shut down and the quick rinse light started blinking. I have tried some of the button-reset procedures that were on some other responses but to no avell I even left it unplugged for a while. Any impute would be appreciated. I have a Kenmore Dishwasher Model #74362. After we run a cycle for a normal wash and heated dry the dishes are all very dirty and greasy. It is as if they were never washed. Th


I had the same issue and you will never beleive the solution.\015\012Steps to follow:\015\0121) run one full cycle with no dishes or soap\015\0122) run one full cycle with a dishwasher cleaner like Jetdry\015\0123) run one ful ... Dishwashers

Bosch dishwasher, Model SMU 7056, UC 09, FD 7309. My older unit has operated flawlessly for years. Two days ago it started to "stall" in one cycle and not progress to the next, e.g., stayed in the wash cycle and would not move on to rinse. In addition the heat generated in the machine was way below normal. A repairman told me that if the water doesn't get hot enough, the unit will not move on to the next cycle. I always use the "Regular Wash" option, but tried other options such as 'Economy


... Bosch Dishwashers

Have spent $300 in the last week on Haier HDW101ss repairs. It still isnt fixed. The repair guy 'thinks' it is now a faulty timer. The unit hangs at certain points in the cycle. At these points the timer (ticking) noise stops but the machine carries on washing. It will hang at this point indefinately. I have taken the timer out, and it looks brand new (the unit is only 4yr old). Any advise, does this sound like a timer issue, or could it be something else? Where can i source a cheap (2nd hand)


... Haier Dishwashers

I am a licensed plumber who installed a frigidaire fdb1o5rem1 dishwasher for a customer about 2 years ago. It has water to the solenoid valve and the screen is clean. I can see water coming in to the unit on left side through the port hole on the inside of the unit. Dishes do not get clean and it doesnt act like water is being distrubuted inside the dishwasher. Soap never gets washed away from door. Dishwasher makes funny sound in mid cycle like the pump is not running in wash cycle. Discharge p


I can see from what you have described (by the way it is a very clear and precise description which is very helpful), there is a problem in the water circulation system. These dishwashers use an alternating water flow method to split the water circul ... Frigidaire Dishwashers

I have a two drawer integrated unit, 7 years old, no problems up to now. Both units started beeping; I disconnected the electrical source. Was able to start the top unit after some time messing with the controls. During/after the cycle, both units started beeping again.


Most likely a F1 fault which means that the Mains Filter board on the bottom pan has detected water, a leak. There are, unfortunately, a few possibilities of the cause of this. Most likely it is bad lid motors (the motors that lift and pull down th ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Cycle time Just moved in, started the Bosch dishwashe that appears to be less than two years old, left for one-hour and came back to find the wash cycle still going; hasn't cycled in thirty minutes since I've returned. Is this normal? What is the standard cycle time?


Yes its normal.bosch dishwashers use very little water and energy but,the cycles need to be longer to get the dishes clean. its perfectly OK.(ps use cascade powder if you can) ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

We have a Model smu 4056 UC/14 that is 13 years old. Abount 2 inches of water is standing in the bottom of the stainless steel tank. We cannot make the unit restart. We understand that you have had problems with the pump vlave and the timer switch on this unit. Can yo tell us how to restart the unit.


... Dishwashers

Our moffat quiet 2 dishwasher has recently developed the problem that the dishes are not cleaned properly. It does drain water. We've opened the drain cover to check that. There does not seem to be a problem there. We've also started hearing a buzzing sound that lasts a minute or so between cycles. (Not between every cycle though) It's random. We rinse our dishes thoroughly before running a cycle. This unit is approx. 5 years old. Any suggestions?


Check to make sure there are no obstructions blocking the washer heads from spinning. ... Dishwashers

I have a Siemens dishwasher SE64530/17 type S9 V15 Unit powers up and appears to begin wash cycle. However little or no water enters unit. Unit is about 12 years old and has been working fine. There have been no changes to installation, plumbing or electrical.


... Siemens Dishwashers

Dishwasher never shuts off. does half the cycle and then never stops. (five year old dishwasher).


The timer has failed. ... Bosch Dishwashers

Bosch dishwasher SHU3032UC/U12: Gets stuck mid cycle. Timer does not move, but will continue if turned manually. Will stick again. Thought it might be the timer (control unit), but now am wondering if it could be the heating element or thermostat.


Hello, Welcome to FixYa. Based on you description of the timer not advancing you`re on the right track when you said "Thought it might be the timer (control unit), but now am wondering if it could be t ... Dishwashers

Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?


Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers

The lid to the soap compartment for the second soaping no longer opens. How can I fix this? It will no longer start a heavy duty or pots and pans wash. When I tried to run a pots and pans wash, water leaked out from the door. This has never happened on any other wash cycle. This isn't a really old dishwasher. Only about 8 years old.


8 years is a long time for a dishwasher but good going non the less.You will need to open the front panel and check the connections to the dispensor,all switches etc,The water leeking from the door could be a sign that the seal is perrished or simply ... Dishwashers

2 years old but NEVER used it yet. Put on today and it would not run any cycles. Let in water and emptied it out but would not do a wash cycle. All this from start to finish in about 8 mins. Washer kept making this droning noise as if it was trying to do something but couldn't. Checked all the waste pipes and filters - all clean - By the way it was still empty of crockery when I tried to do this. Bosch Model SHV55 MO3GB


Dishwasher have a antiflood device system in the base of the applince try a tip the machine backwoord or sideway if water comes out the base you have a leak generally associate wit a failure of the seal around the impeller of the motor or the microsw ... Bosch Dishwashers

Makes growling noise during the wash cycle. some vibration. unit is 6 or 7 years old. it is a maytag jet II EQ. cannot locate the model number as it is a built in unit. would appreciate any help. thank you


Hi Spacepaint,\015\012No manufacturer hides the model/serial number behind the enclosure. Look closely on the side of the door panel edge and on the inside edge of the door jam. You will find the model number there.\015\012\015\012Growling that ... Maytag MDB9600A Jetclean II Built-in Dishwasher

I have a maytag washer (model -dependable care) and when we start the wash the motor just hums, the water does not fill, if we move the timer switch to rinse the motor engages and the unit works entire the end of the cycle, this is the same for all cycles


Check your fill tubes remove the hoses and see if the filters are plugged, you are not hearing the motor humming. You are hearing the watervalve humming, the motor will not start until the tube is full of water. ... Maytag MDB6650A Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1109 seconds