Having problems with your KitchenAid Dishwashers ?

I have kitchenAid KUDM24SEWH5. The door opens with no resistance. I assume the door spring came loose or broke. How do I check this out?


Answers :

If you remove the toe kick panel and look at either side of the machine you will see a lower frame rail near the floor. If you look at the upper and lower edges of the toe kick you should see 2 or 4 screws which are typically used to hold it on. Under the panel on either side there is a spring clipped to the frame rail about 4 to 6 inches from the front. This is the door spring. It attaches on an arm the is at a 90 degree angle from the front door panel. There is one on each side.

Alternately you may pull the dishwasher out from the cabinet to reattach the spring if it is loose. If you open the dishwasher door and look upwards under your counter top near the top of the dishwasher you should see two screws which fasten the dishwasher to the cabinet. Some models have side screws but most just have the top. With the screws out you should be able to bull the dishwasher straight out from under the cabinet. Do not use the door to pull as you could pop it off of the hinges. You will only have to pull it out 6 inches or so to see the springs and mounting positions.
Repair Help & Product Troubleshooting for KitchenAid Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have kitchenAid KUDM24SEWH5. The door opens with no resistance. I assume the door spring came loose or broke. How do I check this out?


If you remove the toe kick panel and look at either side of the machine you will see a lower frame rail near the floor. If you look at the upper and lower edges of the toe kick you should see 2 or 4 screws which are typically used to hold it on. Unde ... KitchenAid Dishwashers

The door spring must of came loose or broke off.The door falls open if you don't hold it as you open it. Before I start dismantling the dishwasher to repair this is it inside the door or on the side of the dishwasher.


You can probably change that from the underside Dave. But you may need to pull the unit out. It should be exposed from the side ... Jenn-Air JDB6510 Built-in Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My bosch dishwasher's (model she45m) front control panel broke. When opening the door, some plastic broke and the front control panel cover came loose. I believe the latch is preventing the plas


... Bosch SHE45M06UC Built-in Dishwasher

Kitchenaid dishwasher KUDK02CRBS the spring on the door broke? Is this a easy fix, where do you access the spring


Turn off the power to the dishwasher.Remove the access cover on the bottom front of the dishwasher.Lying on the floor,you can see the door hinges and replace the spring. ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

Door springs broke on KitchenAid model KUDP02CRBS1


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Dishwasher door spring broke? - KitchenAid Dishwashers


... KitchenAid Dishwashers

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

I have an Indesit DV62WHUK dishwasher and the last night the door made a banging sound when it was opened and now it won't close and will fall back under it's own weight. I suspect either a spring, spring cable or a hinge has broken. How do I check this? Is the spring mechanism in the door or main unit?


There is a plastic unit behind the door handle which houses a spring under tension. This latches the door closed and makes the electrical connection to allow the machine to work properly. You need to buy a new unit (\302\24315) which is a bit fiddly ... Indesit 23 in. DV62 IX Built-in Dishwasher

Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


... Dishwashers

My Hotpoint diswasher suddenly stopped working last night. It seems like it has no power to it, as the motor or pump does not seem to come on at all. Obviously when I get home from work, I will check the obvious first - making sure it has power to it, connections are secure etc. (I had a wire break before) If it does have power, I would assume checking the door switch and timer is next. Any suggestions, and any suggestions for checking the door switch and timer??


Sounds like your on the right track. I would use an ohmeter to check the resistance of the door switch by placing the meter probes on each side of the switch. Test while opened and closed position. Same with timer ... Hotpoint Dishwashers

Broken door spring on kitchenaid dishwasher


Hello,\015\012\015\012Please read our safety information before attempting any testing or repairs.\015\012 \015\012 Before repairing the door springs, unplug the dishwasher or shut off the power at the fuse box or breaker pan ... Dishwashers

Have a Kenmore dishwasher #665.1677993, approx. 13 years old. Upon starting new cycle the pump turns on for a few short seconds, then off, then after a couple minutes it goes on again for a few seconds then off, then later in the cycle it does stay on for a longer period of time. In conjuntion with this intermitent problem it has begun leaking out the bottom of the front door. I have checked drain line, check valve, strainer/screen and vent in the door. I assume it is an electrical issue?


... Kenmore Dishwashers

Door spring broke (I think) door is now very heavy how do I replace springs. Thanks Jerry


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Kenmore Elite Dishwasher model 665.1379. Door falls open. We think the spring broke. Does this model have a door spring balance kit?


... Dishwashers

I own a KUDS01FLSS3 KitchenAid dishwasher. The lights on the control panel do not come on and a cycle can not be started. There is about an inch of water in the bottom of the dishwasher basin and it looks like the previous cycle did not complete. I have checked the wall outlet that the washer is plugged into and the washer is receiving power from the wall. And ideas? My next thought was to take the door off and check the power supply running to the door panel and control panel.


Servtek06 writes:\015\012check connections @ control board/module. May be Control Board/Module. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

While on vacation our house had been checked at one week later &again 2 weeks later, @ 3 weeks check, floor in front of dish washer & entire kitchen had standing water , as DW door was opened bottom of DW had water standing up to bottom of door . Water supply to house was shut off before we left. , Since we returned home we have used DW daily with no indication of where this water came from. Any ideas ? Thanks, Bob


Take a long shot. Say your mains leak a little, quite possible, and you machine's inlet solenoid valve leaks a bit, say about a litre a day - you probably would not notice it during the normal course of events, in a week it would leak a ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Whirlpool Estate Model TUD6700 - The spring came off of the door that comes open to release the dishwasher detergent. How do I put the spring back onto the door?


... Maytag 24 in. PDB1420 Built-in Dishwasher

D/W door came unhinged and spring detached. Spring reattached and door in place but no power to button/switches?


Most dishmachines have a safety switch incorperated in the door to prevent the unit from working untill the door is closed "Properly".\015\012\015\012In your case this feature may be triggered by the spring that fell off in some way. ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

The spring on the door broke (loud sound) and now the door is heavy and doesn't stay up unless we latch it each time. How do we find instructions for installing a new spring?


Its hard to find instructions but go to sears parts direct and order parts .you will see the location of the parts and a image that should put uyou in the right direction ... Frigidaire PLDB998A Built-in Dishwasher

Door spring rope broke on door , door falls when opened like to fix it need part and diagram of unit


Http://www.bosch-eshop.com - enter the correct model number: SHE43P05UC in the search box on the right side, select which dishwasher you have from the results list. Click on the ... Bosch Dishwashers

GE GSD900L-02 Door spring cable broke


Get 2 of the same springs part # PS259673 DOOR SPRING (YELLOW) (Heavy Duty Door Spring) ... GE Dishwashers

The door release bar on our KitchenAid KUDV24SE is hanging loose and so the door won't open. According to the installation booklet, the dishwasher should be attached to the floor or countertop to prevent it falling over when the door is opened, so I can't pull it away from the counter for better access. How do I open the door from the front? Thanks.


Looks like a very tight spot to be in. Your best bet is to get the toe panel off (item 8) in ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

Door spring on dishwasher broke


I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-\015\012 ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0877 seconds