Having problems with your KitchenAid Dishwashers ?

Need to replace adjuster on top rack.

\015 The axel is broken on the adjuster on the top rack. This holds the wheel that fits in the slide out rack. I have ordered a new adjuster but can't figure out how to remove the old part and replace it with the new part. I need a few pages from a service manual or some good advice on how to do this.\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to replace adjuster on top rack.


... KitchenAid Dishwashers

Need to replace wheel assembly on top rack


... KitchenAid KUDE40FXBL Builtin Dishwasher

How do I replace the adjuster (the thing with the wheels) on the top rack of my Kitchenaid KUDS35FXSS


... KitchenAid KUDS35FXSS Dishwasher

I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9


... McCulloch Pressure Washers

My Viking dishwasher top rack needs to be replaced. Do you know where I can purchase a used one? The new top racks are $350 or more. My model number is VUD141


... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Our Maytag model MDB4010AWW (8 1/2 years old) is leaving food stuck on the dishes and glasses on the top rack consistently. We've run several bottles of Dishwasher Magic through in the past few weeks which has only helped the problem a little. We posted this question to a similar forum a few weeks ago, and it was suggested that the wash pump might need replacement. What's the average life expectancy of a lowend dishwasher like ours? would it be more cost effective to replace it rather than to sp


It would cost you at least the 200.00 to have it replaced since the pump cost 150.00 and you would have labor added. It should last longer than it did if that's what's wrong with it. I would first observe to see if the upper spray arm is spinning and ... Dishwashers

I need to replace my top rack on the Kitchenaid dishwasher KUDA220T. Where can I get it or what other rack would fit?


You can order it from Kitchen Aid directly. The part number is 9741982Their phone number is 1-800-422-1230 ... Maytag MDB3100 Dishwasher

Hello my dishwasher is not cleaning the dishes properly and has undesolved powder in the dispenser.The plastic rack has snapped in some places and tends to sag There is a chalky residue on all utensil and they seem to come out worse than before the wash Please advise as to where replacement parts for the top rack are available and the cost for the same and if I need salt in the disherwasher . I live in Madeley ,northern Suburb of Perth Thanks Parames


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Whirlpool Dishwashers

Matag Dishwasher model MDB9150AWS dish racks have rusted out and need replacement for both top and bottom. Pleae advise on availability fo replacements, cost and complexity of installation.


... Dishwashers

Are the top rack adjusters on the Whirlpool GU2400XTP dishwasher an owner-serviceable item? Do most Whirlpool parts stores sell the top rack adjusters for the Adjustable 2-position top rack? My dishwasher is five years old and one of the adjusters has broken. The two-position rack seems like a good idea but the plastic part doesn't look like it was built for high-temperature durability.


... Whirlpool GU2400XTP Built-in Dishwasher

Our Whirlpool dishwasher, DU1145XTPBA, has almost quit cleaning the dishes. It started with dishes on the top rack. My husband was told by rep to replace the top unit. That did not help at all. Now the bottom dishes are almost as dirty and gritty as the top rack. This dishwasher is too new to have to be replaced and we've already spent $50 on the top rack. Is there anything else to check at this point?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Replace kitchenaid top rack adjuster - KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

How do I remove the top rack on KitchenAid dishwasher #KUDR24SEBL2? I need to replace part #8539324.


... KitchenAid Dishwashers

My Bosch dishwasher has been great, but several of the runners need replacing, both on the bottom and top rack. Please advise where/how I can purchase some. Serial No: SM12012GB/20 Thanks Sarah Stokes [email protected]


... Bosch Dishwashers

Hi, I am looking to find replacement parts for the top rack glider wheel and screw on the right side of my dishwasher. Model # mdbh970awq. I have found parts break down web sites but none seem to have the part I need. Thanks for the help.


... Maytag 24 in. MDBH970AW Built-in Dishwasher

Need Rack Adjuster (Right) P/N 99002783


... Maytag 24 in. MDB8600AWS Jetclean II Built-in Dishwasher

I have a Maytag Quiet Series 300 Model # MDB8601AWS and serial # 10142983NA. I need to replace the bottom rack as many of the prongs have broken off and I need a bigger utensil holder. I know it has a safty recall and a local repairman is coming on Saturday. Where do I buy the replacement racks and holder?


... Maytag 24 in. PDC3600A Built-in Dishwasher

Top rack extra shelf for knife holder clip keeps hitting the rubber seal on the left side when the top rack is pushed into the washer. The top rack is leveled but tends to lean to the left. The seal is wearing at the contact point. I think it's a design flaw. What can be done to prevent it and can the seal be easily replaced?


... Bosch Evolution 800 SHE68M05UC Stainless Steel Dishwasher

Cannot remove rack adjuster on Kitchenaid Dishwasher Model # KUDE40FXWH1to replace part


... Asko Dishwashers

Need replacement dish rack


Check out sears parts department online. Put in your serial number and they seem to have a lot of Danby parts. ... Dishwashers

There is alot of "crud" left on the top rack dishes. i have cleaned the dishwasher and replaced the hose that goes from the back of the machine to the top rack to the top spray arm - still have problems


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


... Kenmore Dishwashers

Upper and lower racks of Beaumark dishwasher purchased in mid-1990s (model and serial number available) need replacing. Coating on metal racks has worn away and resulting rust is getting on dishes. Replacement racks (new) cost more than the dishwasher itself (figure that!). Can anybody help out with a suggestion?


... Dishwashers

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1030 seconds