Having problems with your KitchenAid KUDD01SSSS Compact Dishwasher ?
I have no lights on the pannel. Circuit braker is fine. any ideas?
Repair Help & Product Troubleshooting for KitchenAid KUDD01SSSS Compact Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have no lights on the pannel. Circuit braker is fine. any ideas?
... KitchenAid KUDD01SSSS Compact Dishwasher
Kitchen circut was accidently turned off. Now whirlpool gold disher will not work(unit was not running and the door was not closed all the way when circuit was turned off, All circuit breakers are on) There are no lights on display when door is closed completely, and it appears to have no power. Worked fine prior, what could it be? The unit has not been removed from under the counter yet. Is there a fuse or circuit breaker on the unit? If so where is it located? Other troubleshooting ideas
Hello- Turn power off. Remove kick panel and cover for power wires. Check connections. If these are ok, most likely suspect is a fuse at the control. This is a little harder to get to. Remove inside door panel screws. Unplug wires and remove panel. F ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
Frigidare fdb1500lfco wont start. Heat dry light on and wont go off. Circuit breaker fine. Any ideas? No problems with dishwasher up til now. Pushed all buttons, nothing. No standing water.
Press and hold the heat dry button and it will turn off, so dishwasher is usable again. ... Frigidaire Dishwashers
I have a 7 yr old KitchenAid undercounter dishwasher that was working fine, then it suddenly appeared to lose power: no lights and no response when buttons pressed. The circuit breaker is not the problem. Any idea what might be wrong?
Hello smaumer... \015\012\015\012When you say that the circuit breaker is not the problem, are you sure you are getting power to the receptacle that supplies power to teh dishwasher ? Just because the breaker in your house does not appear ... KitchenAid KUDR01TJ Dishwasher
Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.
... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher
Bosch SHE58C05UC/50 dishwasher stopped at 96 minutes (will not advance) & I cannot cancel. Diagnostic codes C4 then P0, rinse light steady on, drying light flashing. No water in anti-overflow pan, it's dry, float switch is working. Vacuumed out any/all water, Have replaced water inlet valve. Main circuit board shows no sign of solder joint disruption. Have switched circuit on, then off in attempt to reset (negative results). Any ideas on how to reset and then to fix the problem?
... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher
Is there a fuse or a circuit breaker in the Kenmore Ultrawash, quiet guard4 smartwash dishwasher purchased about 3-4 years ago? There is no power going to the machine--the outlet, the circuit, etc are all fine--but no lights light up on the panel and the washer wont start. Any suggestions?
There is a fuse behind the control panle its white and 1 inch by 1 inch ... Dishwashers
I have a Whirlpool ADF951, it has power to it and was working fine, the power light is on and the green light to the far right of the cycle lights is flashing, I can only get any response if I hold the start button in for about 10-15 seconds, The machine stops the light flashing and makes the noise like it is starting , that goes for about 20 secs then returns to the flashing light stage, any idea's please
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the light flashes, pauses, and then repeats. When\015\012the dishwasher doesn't sense a water tempera ... Dishwashers
Bosch DW model SHU53A05UC/17 was working fine until yesterday evening. Went to turn it on and now get nothing. No lights, no power zip. It's on its own 20amp circuit. Checked the fuse and it's not blown. Flip the breaker on/off a few times anyway to make sure. I was installing a floor and used my miter saw on the sump pump circuit (diff from the DW circuit). It blew the fuse a few times. Any chance, on a diff circuit, it spiked and damaged a board in the DW? What part (part #) would
I have a SMEG dishwasher. Can't find the model number on dishwasher or manual. Had two flashing lights and referred to manual - indicates a blocked filter. Cleaned that out, but now when I try to put it on "light" cycle (indicated by wineglass symbol), that light flashes (but no others as would indicate a problem).. All the other cycles work fine. Any ideas? Thank you!
Hi.If only the crystal light is flashing and no other light is on, then that is not an error code. Problem can be a temporary malfunction, or a defective control module or keypad.The delicate (crystal) light flashing with last ... Smeg 24 in. STX2 Built-in Dishwasher
Circuit breaker failed, installed new circuit breaker, power restored,when I plugged in line from dishwasher no lights, nothing, had been working fine prior to replacing circuit breaker.
Hi\015\012\015\012The\015\012issue is with the control board of the unit that has gone bad and should be\015\012replaced. It seems that when the circuit breaker failed a component went bad\015\012due to the power surge caused by failed ci ... Dishwashers
Close door, no lights come on, no sign of power. Circuit breaker fine. Door latches fine. ran fine day before.
There is a fuse on your main control board that comes off and can be replaced somewhat easily. Start by TURNING OFF THE POWER. Open the door down to the floor and take a torx(or starhead) screwdriver and remove every screw (10 of them usually) along ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher
Wont turn on checked the circuit breaker is fine there are no lights on the dishwasher
... Maytag 24 in. MDB6657 Built-in Dishwasher
No lights come on at control panel on Kitchenaid KUDS01fl. Circuit Breaker seems fine (have reset it).
... KitchenAid Dishwashers
Kenmore 16359 this ca12. i saw your solution and thanks but i have a question before i change the console. the machine was working fine and we went on vacation and when we came back that is when the light was blinking. could that have caused it or does the consoles just go out? i would like to know so when i repair it i don't break it again. i looked at the possibile fixes prior found the console but not clear if the circuit board comes with because the circuit board in no longer availible. is i
'Membrane buttons' as they are so called, just go bad. The circuit board is not part of the switches. circuit board not available? Chances are this part has a substitution that is available. Many models of this type have consolidated to 1 or 2 standa ... Kenmore 24 in. 16539 Built-in Dishwasher
Maytag silverware blast not working at all. First a few buttons would not light up but I was still able to start it. now nothing works. Electricity is fine, circuit is on. It is only 16 months old. is there a way to reset the circuits ? tks
I just wanted to post because I got a used Maytag from a friend and its panel wouldn't work. There is a reset button on the underneath of the dishwasher next to the power supply on a white plastic thing. I pressed it and it washes now. it puts it at ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
Electrolux ESL 63010 dishwasher. This worked fine until the door catch broke. I replaced the catch but could not remember which way round the two electrical leads went (red and black). I tried both ways with the same result. The lights come on the control panel and I can change the programme, but on closing the door the house fuses blow. I have checked the earth cable is fine. Any ideas?
Red - is active powerblack - ground or neutral ... Electrolux Dishwashers
I have a Frigidaire Gallery dishwasher model number FDB989GFC2. All of the indicator lights on the right side are flashing (Controls lock, add-a-dish, washing, etc.). when buttons are pushed I get no response. Have tried turning off at circuit breaker for 1 hour, when powered back all lights still flashing and still no response from pushing buttons. Any ideas?
You need to rpelace the electronic control board ... Frigidaire FDB989GF Dishwasher
I have a model FDB2310LCC2 dishwasher and it won't turn on. The column cycle lights washing cleaning drying and sanitizing are all blinking simultaneously along with the "high temp wash" light. I de-energized the circuit breaker for approx. 1 minute then re-energized and no difference is noted. Any ideas?
This may be a problem with the door interlock switches. You will need to shut off power to the dishwasher, unscrew the control panel and remove the wires to the door switch ( make note of where the wires go on the switches) and check the switches wit ... Dishwashers
Have an electrical circuit that has stopped working. Romex circa 1930. The breaker is fine. There are 4 ceiling lights and 3 outlets on the circuit. There is power through the hot wire leaving the breaker. Tried wiring to a different breaker to be sure. Still no power
If there is power leaving the box, you have a broken/damaged wire somewhere.If all the lights and outlets do not work - the problem is with the common (return) (white) or a broken/damaged wire before the first item in the circuit.If the b ... Dishwashers
Two days ago my LG dishwasher model lDF 7810BB worked fine. Yesterday I loaded it and the display panel will not light nor show any sign of power. I check the circuit breaker several times and all other electrical items work fine in the kitchen. The 2 year warranty expired 9/08/08
Check for voltage with a multimeter at the wires very near the front, just behind the kick plate. Follow the incoming electrical wire in and remove the little plate the covers the wires/wire nuts. I have seen wires that appear to be connected prope ... LG 24 in. LDF7810 Built-in Dishwasher
Wont start I've had the washer for many years with minimal problem. Yesterday when I closed the door no light went on and the washer would not start. After 20 minutes or so it suddenly went on and worked fine. I thought that it might have not completed its last cycle. Today, however, I had the same problem and it's been over an hour and still hasn't started. (I checked the circuit breaker and it's fine)
Give it a firm push over the door latch once you've closed the door..it might be the door switch not activating. oops.... first and formost isolate from power for 5-10mins and try ... Bosch 24 in. SHU43 Built-in Dishwasher
Help! My Whirlpool Quiet Partner II isn't working at all. Water was standing in bottom at end of last 2 cycles, but on the last cycle, I came home to clean looking dishes, standing water, and a machine that won't turn on at all- no lights on any buttons- nothing works. I've tried the reset codes published here and elsewhere, but there are no lights on any buttons at all. The circuit breaker is fine. I have 3 young kids and can't function long without my dishwasher!
There is a fuse in the control panel what your model# i can get you the part number its easy to replace it. ... Dishwashers
We have a Siemens dishwasher SE25M851. It had the check water light on, so we have checked all water flows which seem fine. There is what I think is an Aquastop connected to the water hose, which I have no idea if the problem is there, but when I now put the dishwasher on there is a burning smell coming out of it, so have had to turn off power supply. Can you shed any light to the problem?
... Siemens Dishwashers
Amana Dishwasher Model #ADB1500AWB3 (Purchased 7/2009) worked fine on Friday, and last night would not turn on, no green lights at all. We check circuit breaker, and electrical outlet but they were working fine. Do you know what might be wrong?