Having problems with your KitchenAid KUDI24SE Built-in Dishwasher ?

Cant get impeller off

\015 I cant get it off\015

Answers :

This may be a problem being water has seized it up you may need to get a pullet puller to get it off
Repair Help & Product Troubleshooting for KitchenAid KUDI24SE Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Cant get impeller off


This may be a problem being water has seized it up you may need to get a pullet puller to get it off ... KitchenAid KUDI24SE Built-in Dishwasher

We bought an aeg favorit 50674 dishwasher ,last week and yesterday i went to open the door to get the dishes out and the door wouldnt open.i tried again but noticed that it had caught on yhe side panel and was bending the panel.not wanting to make it worse i phoned the comit store that sold me the machine they said it was not their fault and wasnt covered on the warrenty .i still cant get my dishes out cant you help.thanks caz ivey


... AEG Dishwashers

Dishwasher problems I have a counter top dishwasher and it's not cleaning things like it used to i think its clogged but i cant get to the drain because it is in the bottom i tried draino but it didn't work i also tried unscewing the bottom but i cant get that part out i think there is somthing stuck in there.


First thing to check water hose that connect at back of machine. pull the screen out and clean it. use a pliers. I run my under water then use a q-tip if its clog to clean the rest.\015\012\015\012Then pour a cup of vingar in machine and ... Danby 22 in. DDW396 Free-standing Dishwasher

I cant get siemens dishwasher to work . An error E25 keeps appearing on the screen . What does this mean ? and how do I get rid of it and get machine to wash ?


... Siemens 24 in. SE20T590GB Free-Standing Dishwasher

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Kenmore 17362 dishwasher was making a bad noise and now the motor seems to be locked up. I might have already un-jammed the motor by removing the cover on the bottom (inside), and turning the knife impeller on the outside of the screen, but I can see lint type material in the hole on the other side of the impeller. Hard to explain, but it is in the hole in the center of the unit and there is a screen like the knife impeller has behind it. I could clean this lint if I could get the door off. How


... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher

The impellers are not turning. We have checked the drain and it is clear. Water does come in and empties, but does not get sprayed around by the two impeller arms.


Hi lyst_diva,Firstly clean the spray arms, do this with small ear-buds & toothpicks. Clean the small holes at the edges. Clogged holes can be the reason why the spray arms aren't spinning anymore.If this is unsuccessful, it co ... Dishwashers

Dishwasher motherboard(switchboard) I cant get my dishwasher to start when push start button and now not all wash options light up. How can I get to start up again?


... Whirlpool Dishwashers

I have a Whirlpool quiet partner ii that won't fully drain. The bottom is fully filled with water. I've taken apart the inner drain portion and screen to get to the impeller. Everything is completely unclogged. The hose is clear. So I assume that it is the pump or valve. How do I get to them to check?


... Whirlpool Dishwashers

I get F11 code! I cleaned impeller restarted an d I still get F11. Pump does not drain the tub. Unit is 6 months old!


... Miele Futura Crystal Series G5105SC

Dishwasher making a loud buzz when the impeller starts. Tappan Cheapest. Is it easy to open the impeller area and check for debris or damage? Looking for schematic to decide whether to call tech or get a new one or do home repair. It is in a rent house and I don't want to spend to much time...or money.


Is it the renters machine .This maynot be your reponseablity.If so Get a Portiable machine kenmore is good. ... Dishwashers

Installing model 665 kenmore dishwasher with granit counter top.The side bracket we are trying to use need to be snap of at the line to get dishwasher to fit right.The problem is we cant get to the screw the side of the washer is in the way and no hole is in the side of the washer.Need a real fix.


... Dishwashers

The spray arm in my single drawer dishwaSHER was not turning freely When I removed the racks I found that the little blue impeller at the centre of the base plate was jammed. How do I release the baseplate so that I can see what's going on there seem to be two locking rings round the impeller--but I cant shift them. Any advice? Or do I need a techy?


You will need a special tool to relese the 2 rings at which point the impeller will come loose. Not sure if you can purchase one over the counter. Possibly a set of snap ring pliers may do the trick but not 100% sure. I you dont have any availbale ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Cant get the front door open on my kuds25sh no way to get at the screws that secure the unit to the counter i am very good with tools but i dont know the way the mechanism is set up please help my wife is driving me crazy cliff


... KitchenAid KUDR25 Dishwasher

Kitchenaid Dish Drawer unit is canted forward; I need to get to the back legs to adjust them downward. How do I get to them?


Open the dishwasher door and undo the two screws that secure the face to the counter-top. Open the kickplate and slide the diswasher out of it's hole. You should be able to easily access the back legs now. It may be easier to disconnect the drain ... KitchenAid Dishwashers

How do you remove the spray arm to get to the impeller in the pump. model HDA150X66WA I found some cherry pits floating in the bottom and assuming that a pit got in the impeller. Thanks for your help


The spray arm is connected to the pillar which is connected to the wash pump at the base. You will need to get a large spanner and turn it anti-clockwise holding the flat profile section of the pillar. I am assuming the spray arm pillar looks like ... Hotpoint Dishwashers

The clean button keeps blinking, will not go off and i cant restart to wash. i hit the heat dry button for six seconds and it was unlocked but i cant get the washer to restart.


If the clean light flashes 7 times, pauses, then repeats...When the dishwasher doesn't sense a water temperature increase, it will\015\012stop working and lock the functions (clean light flashes 7 times, all\015\012buttons are non respons ... Whirlpool GU2400XTP Built-in Dishwasher

Bottom drawer cant get drawer out to get screws out from side walls


Look on the bottom side below the front. You will find two clips that can be pushed in to remove the drawer. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I am having trouble attaching 90 degree brass elbow to the plastic water inlet on my new Maytag Dishwasher. Getting leaks. Teflon tape hasn't worked. Cant seem to get the washer to seat properly when everything is tightened down. Wish the water inlet was not made of plastic. It appears it would seat the gasket properly if the water inlet was made of something more durable.


Hi!!\015\012\015\012Have you tried pipe cement, the plastic to metal kind will take care of any leaks. You can find it at any hardware store.\015\012\015\012Good luck! A HELPFUL - 4 THUMBS - rating for this solution would be greatly app ... Maytag MDB8959AWS Builtin Dishwasher

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

Maytag MDBTT60AB front panel not working, weve had troble in past getting buttons to work now there is nothing at all no lights and we cant get it to start.


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Do beko Diswasher DWD 4311S spray jets open up? they are clogged and i cant get the little musli or grains out


... Dishwashers

My kenmore dishwasher 665.1302 just instaled has electric but cant get it started


... Kenmore Dishwashers

Cant get my drain cover out on my ge dishwasher


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0513 seconds