Having problems with your KitchenAid KUDR01TJ Dishwasher ?

Need to replace door latch. Do I access it by removing all the screws on the inside door panel? or something else? thanks


Answers :

Only the top half screw's would be enough, the pannel should popout then...
Repair Help & Product Troubleshooting for KitchenAid KUDR01TJ Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to replace door latch. Do I access it by removing all the screws on the inside door panel? or something else? thanks


Only the top half screw's would be enough, the pannel should popout then... ... KitchenAid KUDR01TJ Dishwasher

Hello! I just ordered a new facia panel for our Bosch dishwasher SHU9955UC/U12. It seems like it should be fairly easy to replace it (meaning, myself...). Is it really just a question of unscrewing the screws on the inside of the door, removing the old panel and then replacing the new one? Are there any especially delicate inside mechanisms/parts That should be protected? Many thanks.


... Bosch SHU9955UC Built-in Dishwasher

Need to replace the latch assembly on Maytag dishwasher model # MDB5600AWW. How do I gain access to the area where I need to replace the part? I removed the 5 screws at the top, but can't seem to get the upper front panel off. I'm afraid of pulling on it to hard.


Remove all the screws on the inner door panel and lift it up it will be easyer ... Dishwashers

I have removed the screws in the door panel, but something seems to be hanging it up in the center, and I'm afraid of breaking something. How do I get the panel off now that the screws are removed?


Thats all there is to it.Remove all the screws in the door panel.\015\012Click on the link to see the video. It will show you what is behind the panel.\015\012\015\012 ... Dishwashers

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things


If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers

We have a Whirlpool mod# DU1055XTVD0 dishwasher .. the blue latch designed to keep the lid to the detergent dispenser closed after filling has come loose from the inside door panel and now will not stay in place to keep the detergent lid shut. We did find a small o-ring in the bottom of the tub that apparently is part of what helps maybe hold this latch in place, but obviously there must be something else that fits inside the hole the latch goes in that keeps it secure. This


... Whirlpool Dishwashers

Door panel comes apart by about 1/4" of an inch everytime I pull on the handle,it feels like the stainless steel panel will separate from the door but it is only loose. there are a couple of springs inside the door but there are no screws or latches to adjut, is there a solution for this problem?


The dishwasher door generally has issue because of the Latch/Spring/hinges/door seal going bad. \015\012 \015\012In your case as you are referring to springs at the inside of the door, I would like to tell ... Miele Incognito G818SCVi Built-in Dishwasher

There was no category for general home repair or locksmith services, so I hope someone can help me. The doorknob on my master BR closet is broken... the knob will turn but nothing happens. The door opens into the closet, so I cannot access the screws or the door hinges on the inside of the closet. The molding on the bedroom side of the door prevents me from sliding a credit card to move the latch. The knob has no lock, just a flat surface on the knob, but other bedroom doorknobs have a small acc


I used a hatchet. You have to replace it anyway. ... Dishwashers

I want to replace the door spring in an old Kenmore dishwasher, but the screws to remove the bottom panel are flush with the kitchen cabinets. Can I move the dishwasher forward about an inch to expose the screws?


Hi and welcome to FixYa, Initially, pls check the piping works and the drainage connections by visually inspecting these. Normally cabinet works at the sides should allow you this. Additionally, pls make sure that the electrical connecti ... Dishwashers

Maytag dishwasher MDBTT50AWS Door Latch broken. Screws hold the top. The bottom appears to fit into ''plastic teeth'' . Are the teeth supposed to have top and bottom or just bottom teeth. It appears mine has broken teeth on bottom. Is so, do I need to replace control panel to hold latch at bottom.


... Dishwashers

I'm trying to take apart a kitchenaid dishwasher door model KUDP01ILWH0 to replace the dispenser assembly. I removed all the torx screws holding the outer and inner door panels together, but they don't want to separate. Anyone know what the trick is here? Thanks


You can get assembly diagrams of your system. Go to;\015\012http://www.appliancepartspros.com/partsearch/model.aspx?model_id=503 ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

How do I access the soap dispenser grommet on a Whirlpool DU920QWDB3 Quiet Wash Plus? I removed the 8 hex screws holding the plastic inside panel, but the panel seems to be still connected near the top underneath. What is still holding it on and what do I need to do to release it?


The vent grill has to be removed to release it. The diagram is here: ... Whirlpool Dishwashers

How to replace gsf7199tw-ws dispencer .how to remove old dispencer as there are no visible screws. does the inside of the door where the dispenser is seated have to come off to reveal the screws.


Yes. You need to remove the screws around the perimeter of the door in order to seperate the inner and outer halves. then you can access the retaining screws/clips of the dispensor. This is tricky for some models and may require 2 people or 4 hands. ... Bauknecht Dishwashers

Kenmore elite dishwasher stopped in middle of cycle with water still inside. Checked breaker. Replace the hole control panel, door latch from a used kenmore elite. Work for half a cycle and quit with water still inside just like the first time.


Here's your solution (free PDF) - Kenmore Elite Dishwasher Manual ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

I have a Maytag MDB5601AWB dishwasher. all the switches except the heated dry switch are not working. I did the unlock thing and still nothing . Do I need to replace the switch panel or is there something I should try? I tested for power and have 120 volts coming into the circut board and through the door switch Comments: Aug 22, 2009 - I tested the door swich and I have power on both poles when it is closed. there is 2 switches on the latch but the one with power to it powers up the circ


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Front panel My dishwasher wouldn't drain. I read I had to remove the front panel under the door and get to the hose to look for a blockage. I screwed out two screws on the side of the dishwasher and removed the white front panel just under the door. But then there is another metal panel and I can't loosen it. Is it just stuck or is there soem way of doing this? Elmi


Did you knock out the plug on the disposal before you hooked up the drain hose ? ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Our Amana ADB1500AWW dishwasher leaks at far left and far right edges ( at bottom points) of the inside door panel due to a design flaw. ie - In the fully open position ( door in horizontal position) the far left and far right edges (at bottom) of inside plastic door panel are stressed beyond what the plastic can withstand consequently the edges of the panel crack as far as 3 inches from edge to inside. This crack is very small and cannot be seen until the panel is removed and then full insp


... Amana 24 in. ADB1500AW Built-in Dishwasher

How do the back and side panels come off? I have removed the screws from along the front around the door seal and from under the kick plate, but the top panel is somehow just clicked on keeping everyt


... Bosch 24 in. SGS56E02 Exxcel Built-in Dishwasher

Handle broken on indesit integrated dishwasher do i have to remove all the screws on the inside of the door to replace the handle?


... Indesit 23 in. DV62 IX Built-in Dishwasher

The handle on the dishwasher is broken and the door doesn't shut all the way. I removed the screws to look inside and there are wires that go into this component that is connected to the handle. Is this something I can fix? How would I find the parts.


... Amana 24 in. ADB2500AW Built-in Dishwasher

I have an Asko Model 1473/1503 with the word excellence on the front door panel. It is approx 14 yrs old. I noticed that the main switch has been failing and that I have had to giggle it about to latch. It has now completely given up the ghost and there is zero power to the dishwasher. The CB is on . I believe I have to change the main switch but I have no idea how to get at it to remove and replace it. Any ideas?


Http://www.repairclinic.com/smartsearch.aspx?SearchText=`Basko&gclid=CLuI1p7BypcCFQwNGgodD3kkSw\015\012 Call these guys, ther may be a diagram on their site, but I have called them several times in the past and they knew almost immediatlly ... Asko Dishwashers

Removed rear toe-plate to detect leak. Leak caused by broken drain hose. Hose replaced. To do this the unit was tipped forward onto its front door to allow access to the base area. Water allowed to drain out the front base area. Unit re-assembled but now does not switch on. Water connected. Base-plate dry. No water was detected at upper-front control panel. Power is connected and reaching unit ( multi-meter test ). Tipping the unit forward seems to be the cause. Is there any fuse,


The micro switches are frequently replaced on the door handle and they don't need to ever get wet. A lot of amp draw burns those switches up while they are dry. If they were wet and power was applied then they got fried my friend. The good news is th ... Dishwashers

Hi my smeg dishwasher door won't close,something is jamming the hinge on the right hand side.How do we get access to the hinge mechanism,we have removed the bottom panel.


It will be helpful if you provide the full model number of your smeg dishwasher. ... Dishwashers

How do i remove the access panel behind the kick plate so i can replace the inlet water valve? I don't see any screws?


At the front top of the kick plate facing up toward the ceiling you should see phillips screws or 1/4 inch hex head screws. im not positive on this model. if there are no screws there you will have to pull it out from the counter. open the door and r ... Asko 24 in. D3250 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1607 seconds