Having problems with your KitchenAid KUDR24SE Built-in Dishwasher ?

After a regular dishwashing cycle, our dishes and glasses are not getting clean. They are left with a white film. We have checked and all holes in the spray arms are open. We have tried a rinse agent, too. The upper arm gets blocked when we spin it when open ... probably not spinning well in the cycle. any ideas to fix it would be great!


Answers :

Hi


Please check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low.

under the screen and you'll need a Torx screwdriver to get to it after you remove the spray arm and screen. Check to see that the path it travels is clear. I have seen these get blocked up by stuff.
Now check if the top arm spins freely and check the bearings for the arm, if they are producing extra friction while the spray arm spins. White film deposits are observed if water is hard or when you are using more detergent than needed, try filling detergent cup half way. Try using white vinegar after the wash cycle is complete, run a complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results.
You can also add vinegar in the final rinse cycle. Make sure that your soap dispenser drawer is opening and closing fine.
Hope this helps... Please post back if you need more assistance.


Repair Help & Product Troubleshooting for KitchenAid KUDR24SE Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

After a regular dishwashing cycle, our dishes and glasses are not getting clean. They are left with a white film. We have checked and all holes in the spray arms are open. We have tried a rinse agent, too. The upper arm gets blocked when we spin it when open ... probably not spinning well in the cycle. any ideas to fix it would be great!


Hi Please check if something is blocked near the top spray arm, also make sure that all holes are open. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure i ... KitchenAid KUDR24SE Built-in Dishwasher

Hi I've inherited a Zanussi DA6142 Dishwasher from a recent house move. It was treated quite poorly by students who I suspect ran it without the filters in place. I've used a dishwasher cleaner and was able to pull out the lower spray arm and rinse out all the crud that was blocking it (small stones, food, plastic, pieces of glass, paper, etc) but I cannot for the life of me work out how to get the upper spray arm out. The PDF manual I've downloaded for this model says DO NOT remove upper spra


... Zanussi Dishwashers

Top level glasses, dishes, etc are covered in gritty substance after wash cycle. Lower level all dishes end cycle sparkling clean. I have removed and rinsed upper water spin arm. Am also using a rinse agent and still have this problem. Bosch model SHE45M06UC/50.


... Bosch 24 in. SHU5305UC Built-in Dishwasher

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

My GE Profile dishwasher is not cleaning the glasses on the top rack. It leaves all kind of grit and food on the glasses. I did some testing and it lookslike the wash rinse/wash assemblies are not spinning at all. I think the conduit main may be blocked or leaking at the seal. My question is, how do you remove the track (conduit) that brings the water to the upper rinse arms?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Dishwashers

Hello, Im trying to diagnose poor cleaning of glasses in the top rack of my Fridigaire FDB751SCB0. everything seems to work fine but while testing I noticed the upper arm isn't spinning. the lower arm is. i believe the pump is working as water is spayed everywhere inside but no matter which position I leave the upper arm in, I find it in the same place when I open the door. what could cause the upper arm to not get water preventing it from spining?


Hello; first thing to check, which you don't mention, is which side of the glasses aren't coming clean; the outside, which would be caused by the TOP spray not working properly, or the INSIDE, which would be caused by the spray BELOW the top rack not ... Dishwashers

Dishes are not getting cleaned after cycle. Glasses are smoky after cycle and I noticed that the upper spray arm appears not to spin. What would cause upper spray arm not to spin? Is this something I can fix or do I need to have a technician fix it?


Hello kharyespy,\015\012 First we have to address the obvious. Are you making sure that there aren't any large spoons sticking up from the silverware basket. Are there any objects hanging down from the top, or from any where ... Jenn-Air Dishwashers

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

No water delivered,or "spinning" of upper spray arm.Serviced @n year ago & worked very briefly. Spray arms & filter cleaned. Using a hose as water source to test.....spray arm isn't blocked. The problem appears to be water isn't being delivered to upper spray arms. What could cause this & how can I correct? Thanks for your time & response. Sincerely, Lee Ballard


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for\015\012using FixYa. If the dishwasher is not filling then it is w ... Avanti DW18 Built-in Dishwasher

I have a KUDS03CTWHO KitchenAid dishwasher. It started not cleaning the upper tray well a few weeks ago and now the lower one is not getting cleaned very well either. I have disassembled and cleaned the 3rd level , upper and lower spray/wash arm assemblies as well as the feed tube assemble. These were not blocked or glogged. There appears to be less spray coming out of the upper and 3rd level spray arms they before but as I said there is no blockage. I also cleaned the bottom filter. There has b


\015\012Hi\015\012\015\012The issue seems to be with the float switch\015\012assembly that is bad and should be replaced. Please check this ... KitchenAid Dishwashers

I have a Whirlpool Dishwasher DU1345XTVB about 5 years old. It functions perfectly but is not cleaning the dishes well particularly the top rack. The arms spin, soap dispenser works, cycles properly--just doesn't get the food off. I checked the arms to see if the are blocked but don't appear to be as the dishes get wet. Thanks


There are a few things to do. The water temperature is a big contributor, in dishes not getting clean. Another is the type of detergent being used. Liquid dishwasher detergent with water softeners and a drying agent will help loosen food too. If ... Dishwashers

Upper sray arm is getting water,rotates slowly, very top sray head gets none, lower sray arm spins but is not sraying very high, bad pump?


... Kenmore 16583 Dishwasher

Model PDW8200J10WW Upper spary arm not spinning, dishes in the top tray do not get clean, usually have 'grit' on them. Took spray arm out and verified no blockage in the arm itself but can find instructions to remove the bottom spray arm and pump cover to check for items in the pump intake. Any thoughts??? Thanks...


... GE Dishwashers

Upper arm does not spin on Frigidaire model # FDB635RFS6 dishwasher. I cleaned screen around sump and rinsed out arm. Arm is not physically obstructed. Suggestions? Thanks!


Hi,\015\012OK, the arm is jet-propelled, so it will spin if it is free to rotate and has water squirting down into it. If it >is< free to rotate, then either the water isn't squirting, or it is missing the target. On my machine - differen ... Frigidaire Dishwashers

3 PROBLEMS 1. SPRAYER ARM LIGHT ON BUT WHEN I OPEN THE DISHWASHER THERE IS NOTHING BLOCKING THE ARM FROM SPINNING. 2. SALT LIGHT IS ALWAYS ON. HOW DO I ADD SALT. 3. I NEED NEW TRIM FOR THE OUTSIDE OF THE WASHER. WHERE CAN I GET THAT. OH ONE MORE 4. IS THERE A WAY TO HAVE THE WASHER SERVICED SO I KNOW IT'S IN GOOD WORKING ORDER. LIKE A CAR TUNE UP? WHO DO I CALL? THANKS!


This is just to let you know that the internal water softener needs water-softener salt. If you do not use the softener (I do not at my house) then the light serves as a convenient on/off light.The other issues you have can ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

I have a Bosh DLX Series dishwasher, about 6 yrs old. The filter is clean, there are no cracks on the cleaning arm, the hook ups are all good to the sink, the temperature of the water is hot (fine) BUT we are not getting a clean rinse out of it. there is residue that's left on the glasses making them look cloudy. We have rinse agent in the dispenser. Please help. Thanks, Deana


HI. This is essentially caused by a slow build up of calcium deposits that can accumulate overtime. The deposits will build up in the recirculation hoses and inside the dishwasher, as well. This build up will induce the cloudy, filmy substance you se ... Dishwashers

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Maytag quiet 300 Dishes do not get clean. Tried gel and powder deg. Use rinse agent. Temp. at sink is just over 120 degrees. Dishes appear to get cleaned, but then particles are shot back up and coat everything, especially upper rack items.


Make sure that you evenly space your dishes so all of them have space. at the end of the cycle do you see steam? if yes your heater is good and you are recurculating proper. the only thing it could be is that you are overloading it ... Dishwashers

GE PWD7980 dishwasher middle spray arm not spinning when in wash or rinse cycle.


... GE Dishwashers

My kitchenaid dishwasher kudl03fvss0 is leaving disher dirty, specks of debre are allover the dishes, and the door is has debrie on it. seems like the dishes are either not getting sprayed well i have checked to make sure nothing is blocking the spray arms on the top and bottom and i use a rinse aid any ideas?


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Dishwashers

THE UPPER SPRAY ARM ON GE NAUTILUS BUILT-IN DW DOES NOT SPIN OR RINSE. DISHES ARE LEFT WITH GUNK ALL OVER THE OUTSIDE (PRIMARILY) AND ARE NOT CLEANED AFTER CYCLE!


... GE Nautilus 24" Built-in Dishwasher

Our SHU43C02UC/22 dishwasher does not clean, top arm not spinning and filter system is moldy. Rinse agent door opens and the dishes end up with dirty streaks after the cycle


... Bosch Dishwashers

Upper arm is not spinning and dishes are not getting clean


The problem here is most often related to debris in the pump causing poor pressure to the upper part of the machine. I have put together some instructions on how to clean the sump out and help you get back to normal cleaning. Follow the link below an ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1263 seconds