Having problems with your KitchenAid KUDS24SE Built-in Dishwasher ?

Need door latch diagram Kitchen Aid dishwasher (Part No. 9744033)

\015 I have a Kitchen Aid dishwasher (Part No. 9744033) that had door latch that would not work. I took the top panel off to get at the latch but I cannot figure out how to assemble the latch or whether there is a broken/missing part.\015

Answers :

I thought the metal bar had to be locked into place somewhere in the black latch. This was not the case. I just put the white plastic latch in place in the slot in the door and closed the panel and the metal bar went into the correct position against the black latch.
Repair Help & Product Troubleshooting for KitchenAid KUDS24SE Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need door latch diagram Kitchen Aid dishwasher (Part No. 9744033)


I thought the metal bar had to be locked into place somewhere in the black latch. This was not the case. I just put the white plastic latch in place in the slot in the door and closed the panel and the metal bar went into the correct position against ... KitchenAid KUDS24SE Built-in Dishwasher

Kitchen-aid model#KUDI01ILBL6.Clean lite constantly flashes but I cannot run cycle.I have had problems with the door latch for the last 3 or 4 months.Wondering if that could be part of the problem.The door is shut when we are trying to run cycle but dishwasher won't start.


HELLO THERE AND THANKS FOR USING FIXYAYes this is certainly a problem when the door will not latch properly.See the door needs to latch properly to allow the door latch solinoid to complete the circuitOften times the latch just ... KitchenAid Dishwashers

KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!


Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

Need a part #8564929 which is the plastic rinse aid knob that fell off during a cycle and melted. kitchenaid wants $37.76 with tax and shipping for this this little plasticpart. rip off. anyone know where i can get a better deal for this part? the model # is KUDS02FRSS1 (stainless Stell) kitchen Aid dishwasher.


... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Frigidaire Dishwasher Model FDBL955BB0, need door latch wiring diagram


... Frigidaire GLD2445RF Built-in Dishwasher

I need the diagram for the door pulley system so I can make sure I am hooking it up right. The original door chord/pulley assembly broke. I ordered new parts, Now I want to make sure I am putting it back together the right way. The edge of the screw- on floor panel is pushing the plastic hook off of the door hook when you shut the dishwasher door.


... KitchenAid Dishwashers

NO LIGHTS COME ON ON KITCHEN AID DISHWASHER. POWER IS ON TO DISHWASHER. DOOR SEEMS TO LATCH AS ALWAYS.


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

How do I replace myself the detergent/rince aid assembly on a Maytag Jetclean dishwasher EQ plus model #MDB9150WB? I only need to replace the door, but I don't see a part for that, just the entire assembly. Please advise how to replace myself the entire assembly or can I just purchase a door from the detergent/rince assembly? Thanks, Carol


Carol,\015\012\015\012This is a simple repair. Remove the screws around the outer door edge and separate the door. The dispenser is clipped into position with several screws. Remove the screws and push the dispenser through the door.You can pur ... Dishwashers

Door seals for dishwasher lds5811bb it is leaking water and all I want is a diagram of parts so that I can order the right ones. I need the tub seal and the door seal.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... LG 24 in. LDS 5811 Built-in Dishwasher

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

I need the wiring diagram for the GE Dishwasher GSS1800Z01. I bought a replacement door latch and forgot to label the wires when I removed the old broken latch. Please help.


... Dishwashers

We have kitchen aid dishwasher model KUDS01FLBL2. The door now opens too easily as if a spring is no longer in operation. I think I found a part called a door balance spring. Is this something I can fix myself?


Hi,\015\012\015\012You need to order pulley assembly; it comes in pairs (both doors). Open the bottom panel, undo the screws on top (exposed only when door opens), slide out the dishwasher from its place (you might have to undo the ... KitchenAid Dishwashers

I have an Optima series G1470 or G2470 dishwasher with a heavy panel on the front to match the kitchen cabinets. I want to tighten the door spring so I can open it more gently. House guests tend to let go of the door part way down and it bangs open the rest of the way. Also, I have not put salt in. Do I need to in Wisconsin? If so, what kind of salt do I use? Thanks, MJ


About the use of salt depending on water hardness, there is a very good explanation on page 11 ... Miele Premier-Plus Built-in Dishwasher

Kitchen Aid Dishwasher -how replace air inlet cover inside door


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have Kitchen Aid Dishwasher Model # KUDMOITJBLO. We began having trouble with the top rack coming out of the brackets on the upper rack track. Kitchen Aid sent me 4 parts # 8268785. The problem is that the brackets that they sent have wheels on them. I don't know how to get them into the track. A call to Kitchen Aid got me no where. They claimed that they don't sell parts so therefore they could not help me (with the parts that they sold me). The situation has gotten progressively worse.


I removed the tracks from inside the dishwasher.  Then I was able to carefully remove the endcaps (something I had not been able to do previously) carefully.  The existing broken wheels slid out and I slid two new brackets into each track. ... Dishwashers

Frigidaire dishwasher model# fdb641rab1 Door latch wiring diagram


... Frigidaire FDB641RA Built-in Dishwasher

I have a Kenmore dishwasher model # 665.16512202, The handle or latch is slack and it will not close. I've looked at diagrams and all the parts seem in tact but when I place the latch/handle assembly back together it still will not close. I need help please.


Have you checked the latch as well. Make sure the lever lines up with the latch and seats deep enough. No obstructions at the lower hinges as well. ... Dishwashers

I have a kitchen aid dishwasher model # KUDM01TJWHO The clean light has a 7 code. Your link to diagnostic mode/reset didn't work for this model. The tech sheet isn't behind the kick plate nor door panel. Need more suggestions do you have a tech sheet for this model?


You need to see if your getting power from the control all the way to the heating element something in the heating system is not working. some times the element burnes out and takes out the other stuff with it, so check for continuity at the element ... KitchenAid Dishwashers

Need part no. 9741982 Upper Rack for my Kitchen Aid dishwasher. It is a discontinued item. Where can I find one?


My mom bought new racks for her dishwasher and now her dishwasher has died. I have both an upper anda lower if you are still looking for one. ... Maytag MDB3100 Dishwasher

I need a diagram of how the parts for a telmann 12dwm door latch fit together internal componants and wiring


... Dishwashers

I have a kitchen aid dishwasher model number KUD101TJBLO. I have had the thermal fuse replaced numerous times. It may run two weeks ir it may rub two cycles then the fuse blows. My serviceman has given up on finding a solution.He has replaced the control board and the door switch. However it continues blowing the fuse. I read on the internet that you need to replace the entire wiring kit that comes with the fuse but my repairman says this will not fix the problem and refused to replace the kit.


Hi\015\012\015\012\015\012Thanks for using FixYa. Please check for the short on the wires near the heating element. Also check the resistance of the heating element, it should not be more than 1.6 K ohms. Also ma ... KitchenAid Dishwashers

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

My KUDD01DPPA KITCHEN AID DISHWASHER BOTH TOP AND BOTTOM DRAWERS have red lights on in the front and the pumps keep pumping . Is there a flood switch that needs replacing? im a plumber by trade. So im very capable of replacing any of the parts.


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2511 seconds