Having problems with your KitchenAid KUDS30IXBL Builtin Dishwasher ?

I have broken parts on my top rack and I do not know which parts to order. It will not roll on the rack and it looks like the sides on the basket are broken. When you try to slid the rack out the front falls. Very disappointed in the material of the adjustable.


Answers :

Repair Help & Product Troubleshooting for KitchenAid KUDS30IXBL Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have broken parts on my top rack and I do not know which parts to order. It will not roll on the rack and it looks like the sides on the basket are broken. When you try to slid the rack out the front falls. Very disappointed in the material of the adjustable.


... KitchenAid KUDS30IXBL Builtin Dishwasher

Trying to replace broken upper rack adjustment arm . . .


First off check to see if there is an endcap either the front or back of the track. if so remove the cap. check for end mount screws. if no screws the endcap opens up the route for popping the plastic cover off and exposing the screws.. see diagram( ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

Are the top rack adjusters on the Whirlpool GU2400XTP dishwasher an owner-serviceable item? Do most Whirlpool parts stores sell the top rack adjusters for the Adjustable 2-position top rack? My dishwasher is five years old and one of the adjusters has broken. The two-position rack seems like a good idea but the plastic part doesn't look like it was built for high-temperature durability.


... Whirlpool GU2400XTP Built-in Dishwasher

Trying to remove broken upper rack adjuster on kitchenaid dishwasher


... KitchenAid KUDS30IXBL Builtin Dishwasher

Need a part for dishwasher upper rack...clip where you push for adjustable rack is snapped...need parts and cant find...


You didn't mention brand or model... not familiar with any "ajustable racks" other than in and out... however if you google your model a parts warehouse will likely come up that has what you need ... Dishwashers

I bought a used 001355 asko dw. the front door panel and all under panels are naturally loose and I'm having trouble figuring out the reassembly order. And then as I was trying to install the main galvanized under panel, a short galvanized sheet metal part fell out of the door inside the unit. That's the part that now has me really stumped. Can I get a picture of the front of the unit, preferrably an exploded view? Thank you. Paul Cowden. (415) 777-9858 or (415) 302-0628.


... Dishwashers

I am trying to locate an upper rack for an old KitchenAid dishwasher, Model KDS21, I thought I had found it with part number PS402141 which I found on Partselect.com, but they said it was discontinued. My next try was with repairclinic.com and they also said it was discontinued and suggested part number 9741982, That is how I found you.


... Maytag MDB3100 Dishwasher

Cannot remove rack adjuster on Kitchenaid Dishwasher Model # KUDE40FXWH1to replace part


... Asko Dishwashers

I am trying to find what model number our dishwasher is so I can try and find a part for it. It says on the front Maytag Jetclean dishwasher quiet plus. I know its an older one but we are renting and I don't know when they installed it.


If you open up the door, you should be able to locate and see a factory label along one of the sides of the cabinet, where the door closes. \015\012\015\012It might be on the top edge, too, depending on how old it is, but you should be ab ... Dishwashers

My Maytag MDB9150AWS is no longer working due to what I believe is a electrical fire in the front control panel as there was smoke coming out of the top of the front panel. There were no flames but the smell took your breath away. We had to open the Kitchen windows and door for several hours to try to get rid of the smell, but you can still smell it by the dishwasher. This model is not part of the recall. Has anyone else had a similar problem with this model?


My dishwasher (same make and model) had a similar problem except I did see some sparks coming out from th front on the side of it (on Thanksgiving Day no less - a lot of manual diswahing followed). What the problem ultimatly was is what I believe to ... Dishwashers

The wheels of the upper rack of my undercounter diswasher model W10311123B fell off. I have the wheels but need to mount them. There is a big side part that held the axle.....I'm trying to find the right part


... KitchenAid Dishwashers

We have a model GU1200XLT1 dishwasher. For over a year, we have a problem with debris being left on the dishes/glasses. We got sandy like debris in the left front section, top rack, after it has cycled. Mostly on the outside of whatever is in that part of the top rack. How do we get rid of this debris problem? Is there some filter that needs to be cleaned? We also have problem with mold/mildew inside dishwasher. I have cycled it with bleach, ammonia, or vinegar, which temporarily sol


... Whirlpool Dishwashers

I need a replacement part for the upper right rack wheel that rolls inside the metal track.....NOT the wheel that the metal strip slid along. Could you help me find the part?


... Maytag MDBH965AWS Stainless Steel Built-in Dishwasher

Cannot remove rack adjuster on Kitchenaid Dishwasher Model # KUDE40FXWH1to replace part


... Asko Dishwashers

Need left side adjuster rack PN:99002782 Would also like to purchase Right Side Adjuster assembly PN:99002783


... Maytag 24 in. MDB8600AWS Jetclean II Built-in Dishwasher

Electrolux dishwasher upper spray arm not getting water after adjusting rack. it appears the valve in the back of the dishwasher for the previous position will not flap closed. how difficult is this part to change?


... Electrolux EIDW6105GW 24 in. Built-in Dishwasher

I have a pldb998cc0 frigidaire. The tech who came out told me the problem was the control panel and that they don't make them anymore. There is not apparent arc marks so it did not short out. We have turned it on and off to try to get it to reset and all that happens is the front panel lights all go on for 5 seconds then die out. There is no sound at all of pump or water. I talked to the manufacturer and they do not manufacture this part anymore. Any suggestions before I have to pitch it and go


As much as i love what i do i see so many bad techs this guy lied simple! the least he should have done was try another board if he was sure that was the fault he would have its simple electronics fault finding he must have at very least tested the b ... Frigidaire 24 in. PLDB999S Stainless Steel Built-in Dishwasher

Hello, bought an Hanseatic DW12/BFE in Germany approx. 5 years ago and moved with it to Sweden. Now one of the springs (assisting the front lock opening/closing) did break. I've tried to get a new one via a specialised shop dealing with home machines but withour success. They can only support with spare parts out of their ordinary supply chain. Can you help me? Do you have partners in Sweden or can you send me one or two springs? Thanks in advance for your reply, Petra


... Dishwashers

Samsung DMR57 dishwasher - Food grit and grime is now being left on the dishes in the lower rack, especially where they touch, after washing. The unit is 1 1/2 years old. The problem seems to be increasing over the past few months. I've tried all the manual's recommended procedures, to no avail. It would appear that either the water is not splashing up enough OR the grit is not being flushed out sufficiently. The manual states (inside front page) that "This product keeps food waste internal


Make sure that your unit is draining completely, if not then the sump needs to be serviced and cleaned out professionally. Make sure all your wash arms are clear, pull them off and check for stuck toothpicks, food debris etc. Next make sure that they ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

Rack adjuster replace part no. 2001644 - KitchenAid Dishwashers


... KitchenAid Dishwashers

I have a Whirlpool Gold Quietwash Plus (part # 9744480), due to a number of opening and closings of the door, the lights on the front panel now just blink. How can I reset the control panel.. I have tried power scour>air dry>power scour>air dry and only end up with both blinking instead of going into control diagnostics by pushing pots&pans. The unit will attempt to start then just go to blinking lights.. Thanks


I would cut the power to it for awile 5mi and try it that may do it ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

The release clasp on the front of the dishwasher seems to be broken. It does not click correctly when I attempt to open the door and seems "free". For a few times, it seemed like it was hard to open but no one used a lot of force, we just tried several times and then it would open. Can this be a part I can replace myself or do I need to call a repairman?


... Maytag Dishwashers

I have a GE dishwasher and it seems as if the top rack is getting clean and part of the bottom but the back left and front right of the bottom is not cleaning. Something must not be moving for the bottom? Please help! I just got this and was so happy to have a dishwasher and now it is useless :(


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Tappan 18 in. MDR251RE Built-in Dishwasher

Bosch has discontinued making the front flip tine insert for the bottom rack. I have two broken in my Bosch dishwasher. Can I substitute another manufacturer's part?


A solution to this problem would be to sell me your dishwasher. The law \012firm for which I work is looking to acquire an old unrepaired Bosch SHU \01233 dishwasher for some ongoing litigation. If you (or anyone else with \012this model Bosch) could ... Bosch 23 in. SHU33A Built-In Dishwasher

I just purchase LG7392 ST dishwasher and am trying to install. The instructions and photos in the manual for leveling the dishwasher do not match the dishwasher. The front legs are easy to turn. Neither back leg will move even with the assistance of a wrench. There doesn't appear to any way to adjust. Help.


... LG LDF7932ST Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1118 seconds