Having problems with your Kms Factory Reconditioned Power Boss 20344R 2500 PSI 23 GPM 160cc Honda GCV Gas Powered Pressure Washer With 25Foot Hose ?

I'm Just Not Getting Any Pressure, There Is A Plastic Type Valve That Needs To Be Replaced And I Need The Correct Name Of The Part, Any Assistance In This Regard Would Be Greatly Appreciated.


Answers :

Repair Help & Product Troubleshooting for Kms Factory Reconditioned Power Boss 20344R 2500 PSI 23 GPM 160cc Honda GCV Gas Powered Pressure Washer With 25Foot Hose

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I'm Just Not Getting Any Pressure, There Is A Plastic Type Valve That Needs To Be Replaced And I Need The Correct Name Of The Part, Any Assistance In This Regard Would Be Greatly Appreciated.


... Kms Factory Reconditioned Power Boss 20344R 2500 PSI 23 GPM 160cc Honda GCV Gas Powered Pressure Washer With 25Foot Hose

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

II need an owners manuel, on how to operate my maytag legacy series DISHWASHER!!!!!!! Any assistance in this matter would be greatly appreciated, also is there a way i can down load the owners manuel, ITS A MAYTAG LEGACY SERIES ,,,, AND THE NUMBERS ARE #MDBH965AWB--3391777--- 50208 USA-- LR111720,,,,, Please email me a manuel so that i may began to understand how to operate this equipment, Sincere Thanks Windell l smith P,S


Take this link to Maytag and scroll down the page to find a list of owner's manuals to choose from.\015\012\015\012 ... Dishwashers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

I need to locate a circuit board part for a miele dishwasher G692 SCI PLUS. The part number is EPL 545-A. M.-NR. :05491860. iF YOU CAN HELP ME FIND WHERE I CAN BUY THIS PART IT WOULD BE MUCH APPRECIATED.


... Dishwashers

The door now drops hard when opening. In the past the door would drop slowly and was "not heavy" . I found a rubber piece on the floor just below the door. It looks like a rectangular washer . I am assuming the rubber piece helped slow down the drop of the door. Is this a correct assumption? Is this an easily repaired problem? Your help would be greatly appreciated


... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

I have a dif16uk indisit dishwasher and the start button needs pressed many many times to start it . what is the part name i would need?


... Indesit Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Coleman power washer PW0912201. Water is blowing out of the chemical pickup tube when water hose is turned on prior to starting. After starting the water realy blows out from there. Would the unloader be faulty? I tried to pull out the unloader stem assembly from the manifold but it appears to be pressed in. Do I need a new manifold kit? or am I looking at the wrong part to correct this?


... Coleman Pressure Washers

The release clasp on the front of the dishwasher seems to be broken. It does not click correctly when I attempt to open the door and seems "free". For a few times, it seemed like it was hard to open but no one used a lot of force, we just tried several times and then it would open. Can this be a part I can replace myself or do I need to call a repairman?


... Maytag Dishwashers

We just hooked up our old built in GE dishwasher and the water is shooting out the left side of the unit where the black water hose enters the tub. Shouldn't the water be entering into the wash arm? The hose isn't clogged. It attaches to a white plastic piece that is part of the unit itself. The water is entering both the tub but also shooting out of 2 slits approx 1 1/2" each. located right below where u attach the hose.. Any help would be greatly appreciated!


... GE GSD5130 Dishwasher

6 weeks ago we had supplied a Siemens dishwater via Magnet Joinery. !Q 100 -SN65MO31GB . We do not seem to be using this machine correctly and need some help. The tablet stays in its slot throughout the period of washing and the soke dishes are not satisfactorily clean I would appreciate your help


... Siemens Dishwashers

I have whirlpool Dish washer model GU 120 ES (bought in 2001). When we start the dish washer cycle the unit starts for a minute, then the "start indicator" light flashes. As indicated in the instructions, we press the "start button" for five (5) seconds, at this time the washer clears the water out and stops. If you can assist this would be greatly appreciated. Thanks Jeff


I called the service tech.... ... Whirlpool Dishwashers

My wife filled the dishwasher with regular dawn detergent instead of the jet dry stuff. How can I get this soap out of the system? She said she put quite a bit in and only realized what she had done after she was done. Any suggestions would be greatly appreciated. Regards, Dominic


Can you easily hook up the hot water supply to the unit to a cold water supply? if so it will purge the system faster,but if not,just keep running the unit without soap till its purged of soap and no suds left ... Dishwashers

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I have a Kenmore dishwasher 363.15171000 that drains but still leaves standing water in the food catcher. What part would I need to correct this? Thanks! Joe


... Kenmore Dishwashers

I brought a Buffalo WHR-G300N Wireless N Router, did all the login screen thing, connected all the cables correctly and everything.. but I can't load the IP Address ( 196.182.11.1 .. Not sure if thats exactly right) but anyway, it wont load.. so I cant configure the router to connect to my laptop, which has wireless network enability so, i have no idea what to do, any suggestions? Any help would be greatly appreciated!


If you are using the router as an Access Point, 192.168.11.1 wont work unless it is in Router Mode. You should find out LAN IP for the G300N, and use that to access it with username "root"and nothing for the password.\015\012\015\012192.1 ... Dishwashers

Dishwasher has stopped working, Hasn't completely drained water. When you restart it, it makes a humming sound and then stops. The light above the 'on' button, usually blue, turns red. Have removed most of the water ourselves and tried to restart it to no avail. Any assistance would be greatly appreciated.


Hi,Here is a tip that I wrote that will help you with your dishwasher ... Fisher and Paykel DD24SDFTX6 Dishwasher

I have a frigidaire 640 series dishwasher, P/N 154374101. I need to know how to hook up new latch wires (plug on). part number is 5304442152. If you could help that would be great.


... Frigidaire Dishwashers

Kitchen Aid Superba Selectra 21 Mod.: KUDS21SS1 MS S/N: FE 84757436 After whole house power outage, dishwasher began constant high pitch beep or whine. Machine controls unresponsive; display shows F. Cycling power has no effect {except noise stops and display goes off when powered down - of course). Any troubleshooting and parts availability advice would be greatly appreciated!


... KitchenAid Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

Owners Manual I need to find an owners manual for this dishwasher in my new house. Any help would be greatly appreciated?


I uploaded one to this site ... Miele 23 in. Novotronic G841 Built-In Dishwasher

I have two questions and would greatly appreciate some help: - What oil to use in the pressure pump of a Ryobi Pressure Washer RY80030? - How much to put in? The pump model is MTP092150 from FAIP. As per the manufacturer, the oil is not to be changed or topped up by the end-user, I know, I know, but brought to a service center instead - I certainly don't want to do that, and there is none close to my place anyway. The reason I need this is that I had to take the pump apart and a


... FAIP Non Marking Pressure Washer Hose 4000 Psi, 50ft. Length

KUD102CRWH1 The dishwasher does not start after a cycle. I have to reset the breaker in order to get it to run. The green led light flashes twice when I press start and I also replace the thermal fuse. Any assistance would be greatly appreciated. Unit is approximately 4 years old and not sure if there are any recalls on this. Thanks


... KitchenAid Dishwashers

I need to remove a broken heating element from my Whirlpool dishwasher and install the replacement part. I was hoping it would just "pop" out and the new piece would push in, however, it seems that it is not that simple. I need instructions.


Depend on how the heating element goes through the tub you do have to go underneath (if it goes down through the tub in the front) or even remove the dishwasher from the cabinet (if it does it on the back of the dishwasher). The tub is made of ... Whirlpool GU1200XTLS Stainless Steel Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1249 seconds