Having problems with your LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher ?

E1 display in diswasher

\015 LG Dishwasher model:LD-2040WH E1 code display on mashine, I don'tsee any leakage or blocked RiaTel 0836545141\015

Answers :

If you've checked everything, you will need to replace the impeller possibly.


Leakage error > Conditon: Excessive RPM of washing motor happened \015\012during wash cycle due to water leakage.\015\012Possible cause: Water leakage in hose connections,water is leaked by \015\012damages. The motor water seal leakage of sump assembly. The height of \015\012drain hose connection ( sink drain hose ) is not over 20". Impeller of \015\012the washing pump is worn away.
Repair Help & Product Troubleshooting for LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Electrolux Dishles DX 303 Diswasher is displaying .50 on the led display after stacking and going to start it. It will work for a short time and then this code will display. What does it mean and


... Dishwashers

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Electrolux ESF68040 Diswasher. Digital display flashes without displaying anything and wont turn on


... Dishwashers

LDF8812ST diswasher displays error code LE. On


... LG Dishwashers

E1 display in diswasher


If you've checked everything, you will need to replace the impeller possibly.Leakage error > Conditon: Excessive RPM of washing motor happened \015\012during wash cycle due to water leakage.\015\012Possible cause: Water leakage i ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

Hi my Lg stainless steel diswasher wont work and is displaying a e4 error message


... LG 24 in. LDF 7811 Built-in Dishwasher

Diswasher not draining. showing 0E (flashing) on display


OE means outlet error. Check that you can hear water pumping first if not check your drain lines for obstruction. ... LG Dishwashers

My LG LD 2152WH diswasher displays E1 and stops the cycle. No drying occurs.


... LG Dishwashers

I have an ASKO Diswasher type DW 20.5 XL, model D3132. I have an error display _ _ _ _ _ _ _ _ _ and unable to overcome error. I have swithed off ,unplugged and attemped multiple times to restart, but no change. I am planning to arrange a service call but curious to know if anyone can help in the short term.


... Asko Dishwashers

Ex600 diswasher My electrolux EX600 Dishwasher is loosing power during a cycle so I turn the PowerPoint off and then on again and the dishwasher then has power again but "PF" is displayed. Any ideas?


... Electrolux Dishwashers

Hobart LX15H Diswasher wont fill. Displays E4.


E4 error is for 1. Low water pressure - check for clogged hose strainer; check that site water pressure meets minimum flow pressures.2. Make sure probes are clean3. No water pressure - main wate ... Dishwashers

I have a Bosch SHU43C05UC diswasher. Last night, I put it on before going to bed as usual. I was awakened a couple of hours later to a loud grinding sound (like a pump being run dry), and found the noise coming from the dishwasher. The display read "0" time remaining, so I opened the door and the dishes seemed clean, so I left it shut off. Tonight I have been trying to troubleshoot the problem. The dishwasher will turn on, but it will not seem to fill with water. I have verified that the


Ok well before you can do anything you must obtain a service manual, link below.\015\012\015\012http://allrepairmanuals.com/bosch ... Dishwashers

Dishwasher will not start. Clean light flashes. Time display shows --. Manual states "The diswasher has malfunctioned". (Obviously) "Call for service to check heater circuit". Will replacing the circuit board solve the problem?


Hello, welcome to FixYa.\015\012\015\012I understand how vague those manuals can be, very frustrating.\015\012\015\012In regards to the fault, while the control can be an issue and ultimately require replacement...that is a wo ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

Dishwasher starts and runs to 2nd rinse cycle, when pump starts to pump water out, all lights on front display flash along with key pab lights blinking. you can turn off and restart, but is does the same. Diswasher will also try to start when in off mode. Replaced circuit board and it does to same. Did I get a bad circuit board or is there another problem. Also when I try water service test, I get a Rinse aid fault.


U REPLACED THE CIRCUIT BOARD IN THE DOOR, THE ONE BEHIND THE CONTROL BUTTONS? THAT IS THE TIMER, IT IS KNOWN AS THE CCU OR CENTRAL CONTROL UNIT, THAT IS WHAT CONTROLS ALL TIMED FUNCTIONS, SO THAT REALLY IS THE ONLY PART THAT CAN CAUSE THIS PROBLEM ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My electrolux diswasher displays a code PF it wont reset even if i turn it off at the wall ??


... Electrolux Dishwashers

Our bosch diswasher on auto wash will stop functioning in middle of the cycle start beeping and there is an icon of a faucet on the display. What does this mean?


Did you ever solve this issue?my bosch has started doing the same thing. it will complete the cycle though, just with a really annoying constant beep.i checked to see if there was low water pressure coming in but everything seems normal. ... Bosch Dishwashers

Diswasher siphon blocked


I have the same problem ... Dishwashers

The digital display is showing S2


Try switching off the power for a short time it might reset itself ... Kuppersbusch K 24 in. IGVS 669.1 Built-in Dishwasher

Smeg DW1614 diswasher won't start


... Smeg DWI614 Built-in Dishwasher

Model IGV 659.1 Dishwasher When switched on the 'time display' takes longer than 2 minutes to display the planned wash duration. The display works fine to set a delayed start. After cycling the start delay round to 0, or after RESET (buttons A and C pressed) the unit is then 'nudged' into displaying a time. After, at last, a time is displayed the unit works fine.


... Kuppersbusch Dishwashers

Touchpad--No Response The touch pad and Countdown timer display will NOT respond except when the Rinse Only pad is pressed. The Countdown timer displays "9" when this pad is pressed. As expected the light and display turn off after 30s. If after 30s or longer the Start/Cancel pad is pressed with the dishwasher door closed, then the Countdown timer displays "2H" and the dishwasher runs through the ?Auto Clean? or ?Heavy Wash? cycle. Not sure which since neither pad is lit. Is the problem the


The "2H" is an error code indicating the control panel needs to be replaced. ... Bosch 24 in. SHU53 Built-in Dishwasher

I have Frigidaire FDB956RBC1 diswasher. I have to turn off the water to fix the faucet. When I turned the water back on, water did not go to the diswasher when I used it. The diswasher runs normal except with no water going into it. The water runs find at the facet. There is separate water supply underneath the sink for the faucet and the diswasher. I wonder if there is a mechanism with the dishwasher that stop the water from going into the dishwasher after the water supply been turn off. I did


FRIDG... EXPERT HERE \012\012\012Welcome to fixya\012\012Hello\012\012 \012\012 ... Frigidaire FDB956RB Built-in Dishwasher

Faulty heater sensor on a normende DFSN60 diswasher fault 6


... Dishwashers

Maytag diswasher problem


Liberty, it sounds like your keypad is bad, here is your tech sheet for your dishwasher, it will give you detailed instructions for checking it out. Catriver\015\012 ... Dishwashers

Kenwood Diswasher kdw12sta


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0421 seconds