Having problems with your LG 24 in. LD-12BW5 Free-standing Dishwasher ?

My lg dishwasher is giving an IE error msg.

\015 The pipe is not blocked and the water is turned on. the solinoids are working. how do we know if it is the p.c. board or could it be something else. many thanks louise\015

Answers :

Recommend that you follow the drain hose back from the drain to the dishwasher. Are you connected to a Sink-based Disposal or direct-connect to the drain?\015\012
\015\012The problem really can be that the drain hose has fallen and it never rises at least 30 inches above the floor that the dishwasher is sitting on. That causes a natural syphon effect, which drains the DW constantly, causing the dishwasher to believe it is leaking (which it is, through the drain hose.\015\012
\015\012Either install an AirGap valve and then properly connect it to the disposal or tie the hose up to the bottom of the counter to there is a rise between the DW and the drain.
\015\012
\015\012Good Luck!
Repair Help & Product Troubleshooting for LG 24 in. LD-12BW5 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My lg dishwasher is giving an IE error msg.


Recommend that you follow the drain hose back from the drain to the dishwasher. Are you connected to a Sink-based Disposal or direct-connect to the drain?\015\012\015\012The problem really can be that the drain hose has fallen and it never ris ... LG 24 in. LD-12BW5 Free-standing Dishwasher

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

OE Error We have LG dishwasher which gives an OE error. This was an error 6 months ago and this was under warranty. They had to change the pump. Now it is not under warranty. I checked for clogging in the drain pipe where it connects to the garbage disposal. Could not find a problem. This dishwasher is nothing but trouble. Any ideas/suggestions?


You do not have an "OE" error, it is actually a "DE" error. (Drain error) If after 5 minutes of drain time the pump motor RPM's haven't gone up the dishwasher knows that there is still water in the tub and throws the "DE" error. Often times the pro ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

What does this error msg mean i20 my dishwasher washes for a bit then flashed the above error msg??


... Electrolux 23 in. ESL6114 Built-in Dishwasher

Samsung Dishwasher can drain, but gives "drain error"


Sounds like it could be those same water level sensors you worked on before. Only now its telling the thing that there is water still standing in the unit. Try cleaning those sensors again and I know this sounds obvious but check all your conections. ... Samsung DMT400RHS Builtin Dishwasher

Hello everybody, I hope that you gona a give me some tips for repairing my dishwasher mashine. A few days ago, the error F2 appears on my dishwasher machine (Baucknecht GSI 5894) I checked the pump for the waste water is ok. the tap water is not taking in,I checked the hoses they are ok as well I turned off and on and same time pressed the button reset and choosing the programm on the dishwasher few seconds trying to start and again apperas F2 . Hopefully someone can help me. Best regard


Possible the inlet valve has given up and is not allowing water in.\012Also possible there is a slight leak enough to shut the water off (safety feature) - Check underneath for a float mechanism and any water there. ... Bauknecht Dishwashers

Hi I have a LG LD-2052 dishwasher. It gives me an E 0 error - the water does not pump out when I open the machine after a few minutes when started to wash and message of E 0 appears? Have cleaned an


... LG Dishwashers

Fridgidaire dishwasher 4000 gives error code eu


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Dishwasher turns on by it self. Gives F1 error


Replace control board ... Dishwashers

Omega dishwasher giving error code e4 - Dishwashers


... Dishwashers

My elecrolux dishwasher gives me error code 11. What do I do? I have the manual, which says that it timed out before it could establish a drain... but there is no info on how to fix it. The dishwasher is new, but it has run 6 or 7 times with no problems.


... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher

I have a Twenty-Eight Hundred dishwasher that is giving me a constant Blocked Wash Arm error. I've reached in and freed it, made sure it was as free as possible - have only stopped short of physically crawling into the dishwasher to fix it. I can't get it to work, despite nothing really blocking. Can someone help me out?


... GE Dishwashers

GE profile Dishwasher gives an error: C5 - GE Dishwashers


C5 - Low Water Fill - This error usually indicates bad water inlet valve. Check for low water pressure to unit. ... GE Dishwashers

Hi Masters! My dishwasher was stopped during the program and the second LED ( from the four ) is flashing. Please send me the ARISTON LS 248 T dishwasher error code list if you could or please give advice for me. Many thanks,


... Dishwashers

Kindly give me the meaning of error C8 on Zanussi dishwasher, Mod LS 10-14, and list of error codes and it's meaning. Thanks. Lee


... Dishwashers

Hello, my Frigidaire Professional Series dishwasher (AquaSurge with SpeedClean) gives me error messages; it does not allow me to use any setting other than normal wash; it stops mid-cycle; it needs to be reset - either on the appliance itself or by tripping the breaker. I am never sure that the dishwasher will complete a cycle. Thank you for your assistance.


... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

My dsc dishwasher is giving me E1 (error 1). - DCS DW-24-SS Built-in Dishwasher


... DCS DW-24-SS Built-in Dishwasher

I have a Samsung DMT800 Series Dishwasher - Model DMT800RHS/XAC and it is giving an SE error


... Samsung DMT800RHS Dishwasher

My fisher and paykel dishwasher drawers is giving me an F1 error code, won't stop running and is acting like it's possessed.


... Fisher Dishwashers

LG Dishwasher LDF7810ST. Starts cycle, stops gives error code LE


... LG 24 in. LDF7810 Built-in Dishwasher

My dishwasher a kelvinator kd12dss-2 gives me an error 3


... Kelvinator Dishwashers

We have a Hobart FXS 70N Dishwasher and it gives us a F04 error code. What does it mean and how can it be fixed? Where can we also get a wiring diagram for it? Thanks Engela


... Dishwashers

We have a 3 mo. old bosch dishwasher (she6af06uc), that's giving me error code 24, turning off and not draining. Yes, there's a warranty, but if I can fix it quicker, that would be great.


The code you are getting is a drain pump issue.use a wet dry shop vac attach it to the end of the drain hose to remove the water.then check your drain pump for any kind of obsrtutions.\015\012Also make sure the if it attached to a garbage dispo ... Bosch 24 in. SHX99A15UC Stainless Steel Dishwasher

Brada dishwasher giving error 3 message any ideas


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1767 seconds