Having problems with your LG 24 in. LD-12BW5 Free-standing Dishwasher ?

Instead of showinf a time my LG dishwasher (LD-2120w) has code: F on then during a cycle it stops and flashes 0E. I have found OE means to clean the filter which i think i have done, but the priblem is still ocurring


Answers :

With an OE error, the next step is to follow the drain hose from where it connects to the dishwasher through the point where it connects to the drain.

Look for crushed hose, kinked hose. Then look for a plugged drain connection.

Please report back what you find. There are other things that ~could~ cause the problem. OK?
Repair Help & Product Troubleshooting for LG 24 in. LD-12BW5 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Instead of showinf a time my LG dishwasher (LD-2120w) has code: F on then during a cycle it stops and flashes 0E. I have found OE means to clean the filter which i think i have done, but the priblem is still ocurring


With an OE error, the next step is to follow the drain hose from where it connects to the dishwasher through the point where it connects to the drain.Look for crushed hose, kinked hose. Then look for a plugged drain connection. ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Good morning, the rince button is flashing which means according to the manuals, clean the filters. I have done this but the water still wont load into the dishwasher. It starts then shuts down again.


Check the inlet valve is still working correctly ... Indesit Dishwashers

Hi i have a bosch model no sgs53e02au australia 2 weeks ago put a wash through over night woke up in morning noticed still making noise opened up the door of dw still making noise sort of brrrrr noise constant not stopping unless press botton off would turn off still had water in bottom rang company they told me to clean filter which i did found glass particules took water out with sponge clean it rang back they told me to get a piticuler tool size 20 to unscrew and pull out pump sat there unscr


... Bosch Dishwashers

Hi, I have an ASKO D3250 dishwasher and it keeps stopping during the wash cycle and flashing the heavy pots and pots symbol simultaneously. I tried cleaning the filter basket and found a little plastic part floating in there that has printed on it PP-T20. I don't know where this piece goes or if it's even the culprit. There is a little bit of water not draining from the filter area when I unscrew the outer filter basket, I cleaned it out, but when I re-run it, it still stops and gives the dual f


The part is a cap for the drain pump. You can put it back into position by removing the filters and placing it to the left of where the circular filter would be positioned. The part goes in with the part numbers on the bottom facing down. When posit ... Asko 24 in. D3530FI Built-in Dishwasher

I have a Siemens SE65560/12,I have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was ''I'' indicated, or maybe means ''1''. Now the machine does nothing anymore ... I checked already the rotor of the drainage pump, and also the filters are clean ... after pulling MoreI have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was ''I'' indicated, or maybe means ''1''. Now


... Siemens Dishwashers

Not Draining I pulled the filter cover off and found some glass and plastic in the filter area,cleaned it out and it still will not drain.I don't know if this plays into the problem or not,but I replaced the old garbage disposer with a new one.The first time I used the dishwasher after installing the garbage disposer is when I started having the draining problem.


If it does not drain, the drain line can be internally obstructed, follow the instuctions on following link :\015\012\015\012The water doesn't drain from the ... Kenmore 24 in. 15689 Built-in Dishwasher

Hi My dishwaster won't drain from the bottom properly, i have removed the plate and filter & cleaned. I found a piece of broken glass but the water still isn't draining. I also find that unless i rince all the dishes first it doesn't clean properly. Kind Regards


Hi, well usually when a DW will not drain, it has something to do with, the Pump, the outlet hose, or the internal pipes being blocked, or all of them..\015\012\015\012What you need to do, is check for anything blocking the outlet or pump etc ... Dishwashers

I have a Siemens SE65560/12, FD 7808 model. This morning water (not many) was still in the machine, and on the display was "I" indicated, or maybe means "1". Now the machine does nothing anymore ... I checked already the rotor of the drainage pump, and also the filters are clean ... after pulling out the plug from the wall socket, and reconnecting the machine, on the display stays the indication "I" or "1". I can't do anything ...what's the problem


I do not know if you been talking to other experts but without knowing how far you went with them if any I may need to start from the beginning these units are sold in Europe and not the US is that true. Second from your post you went t ... Dishwashers

The dishwasher is not cleanining properly. Cannot lift off the 4-way hydro sweep (with jet spray) (it seems stuck) to clean the removable filter. Kitchenaid Model KUDB220T. I have done this before - but this time cannot remove the 4 - way hydro sweep. found a half ring of metal in bottom of dishwasher - please help


I would suggest you look at diagrams 4 and 5 in the attached assembly drawings. You will have to remove bolt ... KitchenAid Dishwashers

Hello My Miele dishwasher (2 years old) has started a loud crackling sound at the start of the cycle.  It still washes ok. But sounds as though there is some damage being done.  We have cleaned all the filters etc and can't open the base to have a look. Thanks for your help! Karen


... Dishwashers

Can someone please help, my start light has just started flashing on my whirlpool adp 951 dishwasher has never done it before, have cleaned all the arms and filters but is still doing the same thing. please please anyone with any info would be great.


OK I SOLVED MY PROBLEM. I HAVE TAKEN IT TO THE TIP. THERE IS ABSOLUTELY NOTHING I COULD DO TO FIX THE PROBLEM. WHIRLPOOL WERE ABSOLUTELY HOPELESS, SO HAVE DECIDED NOT TO BUY ANOTHER ONE FROM THEM AGAIN. HAVE NOW BOUGHT AN LG - SO THAT WILL BE ARR ... Dishwashers

Have a LG model LD-14AW2 dishwasher which has done good service for many years However, it now sems not to have enough water pressure to operate all the rotary sprayers at the one time - thereby not cleaning properly Have purchased a manual and raken the whole machine apart looking for a partial blockage of the water ways - non found - all looks perfect - still no water pressure I would suspect the pump - however, would have thought a pump either gave full service or stopped - not parti


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Dishwashers

I have been negligent in not cleaning out the filters and after the unit more or less stopped, I pulled the two filters finding them full of what looked like soap scum. I cleaned them best I could (but noticed the inner filter still had most of the small holes blocked) Started the unit and it cleaned alright for a couple of days. Last night after running a load all the water did not empty from the bottom of the tub? Any suggestion on what wrong? Bought the unit on 1/19/05. Thanks


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

My Inglis dishwasher (E71195), 13 years old, doesn't clean properly. There is a film on everything that is especially noticable on glassware. I have cleaned every filter and unclogged everything that I could think of. I tried different detergents; right now I am using the same stuff in the dishwasher as we use to clean the milking equipment in our dairybarn because it gives the best result. It still is not as it should be however, there is still something left on the bottom of the glasses. It is


... Dishwashers

Even though I put the machine on the pots and pans setting, it still does not get the dishes clean, for example there is still coffee ground residue in the mugs. Twice before I have had to pay $100-$200 to have a serviceman come and clean out the little fan/cutter that is in the bottom (inside) of the machine. The serviceman found small chicken bones in the base which we had not rinsed off the plates. Can you tell me how to clean out this fan/cutter device myself? Are there any special tools


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... Dishwashers

Does my dishwasher have a filter inside of it that needs cleaning my dishes smells fishy stinks i have used clr and others items to clean it and it still smells fishy if there is a filter where is it its a built in dishwasher in mobile home


Hi,Here is a tip that will help you with how to clean that dishwasher up and get it smelling good again... ... Whirlpool GU2400XTP Built-in Dishwasher

Hi, I have a Fisher Paykel DD603I (integrated) dishdrawer unit. The bottom drawer soap dispenser has water in it after it runs (and leftover soap), and there is a small amount of water sitting in the bottom of the drawer. The dishes don't get totally clean. I have removed and cleaned the spray arm, drain filter, filter plate and bottom of tub. Found nothing clogged or particularly dirty. Put all the parts back in and everything moves freely. Ran it empty, and same problem occurred.


Hi Dishwashers use Bi-Metal strip to allow the dispenser to open/close. This strip when heat up causes the soap door spring to open up the dispenser. If this strip is not heated doe ... Fisher and Paykel Dishwashers

Our Whirlpool ADP5966 is not washing properly: the dishes do not come out clean and the soap mainly stays in the dispenser although it opens normally. The quick wash cycle is hopeless now and the longer ones still not good. We have cleaned filters, soap dispenser etc but still the soap stays in dispenser often turning into a concrete like block. Thanks


Hi, \015\012\015\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Not cleaning my dishwasher goes thought all it's cycles,but when it is done the dishes are still greasy and the top dishes are still dirty.i have checked the water pressure the psi is 64. i have also cleaned all the wands and drain.can you please give me something less to do.my dishwasher is only 3 yrs old. i have not been able to use it in about a year know.


Check the wash arms make sure that they can spin ... open in mid cycle check water level and arm spin...also check water temp... hope it helps ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

Mod #: MDB6600AWB Ser #: 16505148CG No water comes out of spray arms, checked and cleaned filter-OK. Wash impeller is cracked where it slides onto the hexagon rod but it you take the filter flow plate off and put the impeller back on, when you put the unit on rinse only and quickly open the door you can see it is still turning and moving the water. The unit still fills and drains. it just does not have enough force with the impeller to force the water into the spray arms.


Hi,\015\012 \015\012Please check the bellow link regarding your query....\015\012 \015\012 ... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

My Whirlpool Gold Series 980 dishwater no longer fills up with enough water to drive the washing arms, so the dishes do not come out clean. I cleaned the filter on the water intake valve (which was really clogged) and it still did the same thing. Replaced the inlet valve and still no change. The water does not reach the level of the overfill float switch, so that’s not it. Its been working fine for 4-5 years, what else could it be? Thank you.


I hve provided u with all details .read it carefully .it has all the resolutions for all possibilities ... Whirlpool Dishwashers

I have a BOSCH 8280 dishwasher which at the end of its cycle still has soapy water in the bottom of the machine. The dishes, and especially the cutlery, are left smeared and looking unfinished. I lifted out and cleaned the filter in the floor of the machine but the water still doesn't drain away. Are there any other filters etc which may be causing the problem? Any ideas. Thanks.


There is a float, which controls water level, that caused this draining problem.\015\012\015\012Lift out the main filter assembly in the floor of the dishwasher. \015\012You can now see a small cover, positioned at the front right ... Bosch Dishwashers

I have a whirlpool dishwasher model adp 5550 condenser. The dishes do not get clean. I have had a repair man out twice and he replaced the soap dispenser on Friday but it still doesn't work. I went to the store today and bought every cleaning things I could find for dishwashers and also started to investigate online myself. I took the arms off and cleaned them, I took the filter out and cleaned it, and then I noticed that the plastic bar that runs from the top, along the back and into the bottom


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1314 seconds