Having problems with your LG 24 in. LD-12BW5 Free-standing Dishwasher ?

LG DISHWASHER LDS5811WW HAS ERROR CODE LE.WHAT PART DO I NEED?


Answers :

Check for broken wires... if still cant find the problem take motor off and spin the shaft. if there is resistance then you need a new motor
Repair Help & Product Troubleshooting for LG 24 in. LD-12BW5 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LG DISHWASHER LDS5811WW HAS ERROR CODE LE.WHAT PART DO I NEED?


Check for broken wires... if still cant find the problem take motor off and spin the shaft. if there is resistance then you need a new motor ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Flashes an error code indicating a heater problem -- element looks good. what part may I need? Is it worth the price to fix, or should I replace the dishwasher?


Check the heater or the thermostat. If you have nothing to check them with remove and have someone with a meter check them for you . ... Kenmore 24 in. 17032 Built-in Dishwasher

I have a new world DW60 dishwasher which comes up with an E1 error code. I can't find what it means anywhere & I have checked the manual. Can it be repaired? Do you do the parts needed? I appreciate your help. Michelle


... Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Dishwasher FDB4315LFC0 Error code ER uo Second time it has happened. First time, a repairman came and said I needed a new "vent assembly", but I asked if he could "un stick it," so he took it apart and fiddled with it, and it worked for about a month. Now the error code is back, and he warned that if it came back, I should have it replaced. I've only had this NEW machine 10 months -- this shouldn't happen, right? Any suggestions? Thanks.


Who's to say what should or shouldn't happen?Sounds like you need a new vent assembly. ... Frigidaire Dishwashers

I have an Electrolux dishwasher model EIDW6305GS1. It's been broken 3 times in a year! The error code 03 is on now, meaning that the wash pump is bad. How hard is to replace this part? How long should this part be expected to last? This machine is only a year and a half old. Thanks


... Electrolux EIDW6105GB 24 in Builtin Dishwasher

Frigidaire Dishwasher - Model PLD3460RDC0 WE are having error code "ER" problems with the dishwasher. Over the past 4 years, the control panel has been replaced every year. It runs for up to a year, then needs a new control panel. Suggestions?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. You are right; these Frigidaire models\015\012have had some issues with both the control board and control pane ... Frigidaire 24 in. PLD3460 Built-in Dishwasher

I have an LG dishwasher. Model LDF7811BB. It is giving me a TE error code. I had previously used ya'll for help and ya'll emailed a tech sheet saying to replace the thermister. I called to order the part and the supplier said they can't find a thermister on this unit. Can you tell me what part number it is? Thanks, Greg.


Hi \015\012 \015\012Either the inlet water temp too high over 140 degrees or your thermister went open, or you have a bad control board. This type of error code will require using an ohmmeter to chec ... Dishwashers

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks. My dishwasher showed the error code either OE or E1, I think it was more OE. I stuck my hand in the filter in the bottom of the machine and then it was okay but the next time it was used it leake


What sort of soap powder do you use\015\012some soap powders foam a lot in machine causing dishwasher to leak through seals\015\012also check that the machine is square that is the door is closing parallel with cabinet\015\012do no ... Dishwashers

Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have


... Dishwashers

Dishwasher LG Dishwasher Model LDS5811WW I have an error code LE, what does this mean?


The LE code indicates motor failure (or intermittent problem with motor). Based on what Ive read their support sucks, so sory to be bearer of bad news... ... LG 24 in. LDS 5811 Built-in Dishwasher

Dishwasher model lds5811ww -error code e


... Dishwashers

Our LG Model LDF6810ST Dishwasher (2 years old) does not heat water any more. Dishes do not get clean and do not get dry. I do not get an error code. I assume I need to replace the control board OR heater assembly. How do I determine how to solve the problem?


It cleans poorly ------\015\012\015\012\015\012\015\012\015\012Water-inlet valve\015\012\015\012Most cleaning problems are caused by the dishwasher not getting enough wash water, so the water-inlet valve is often to bl ... Dishwashers

I have a dishdrawer (2) and following the use of a dishwasher cleaner, the bottom drawer appears to have developed a blockage. It will not empty, gets to the pump out part of the cycle and shows the red error code F3, to which there is no reference in the trouble shooting guide. The top drawer has also developed minute leak, sufficient enough to leave dribble marks on the lower drawer and over time, a white deposit on the floor. Is there anything we can do for the blockage problem before reso


Remove the small basket from each drawer and lift up the removable plastic cover and take the drain filters out , empty them of food by products and try it again.. If you've never cleaned them then that's your problem with the drain process.. Hope th ... Fisher and Paykel Dishwashers

Hope you can help me with my Lg ld2060wh dishwasher. I keep getting the error code te on the display panel, I understand that this is related to an issue with the thermistor, I'm not where I should be looking on the machine to locate this part or if any one can direct me to a service manual for my machine.


... LG Dishwashers

I have a Siemens SN25M230GB Dishwasher showing the following: Fault Code E15 Digital display showing (Error) E15 with a flashing 'tap' What does this mean? Is it something that I can fix myself or does it need to be looked at by a professional? Thanks Tina


... Siemens Dishwashers

SMEG STX dishwasher does not complete the wash cycle, stopping after 3 minutes on all cycles displaying error code E1. The machine seems to start with the usual whirring noise but then stops after 3 minutes without pumping in water. The machine is a few years old now but has needed 2 new control panels already although this does not appear to be the problem this time. Any suggestions? Thanks DW


... Dishwashers

My eurotech dishwasher comes up with an error code E1 after running what does this mean and where can i order parts to fix.


... Dishwashers

We have an Hotpoint FDW70 Dishwasher that for some time has had an A10 fault which although stops the machine some times 70% of the time it does a full cycle. However it is now tripping out the electric at the mains. It is not RCD protected, but does not blow it's own 13amp fuse or that of the fused extention lead it is pluged in to. Tends to blow after about 5 minutes. I know about the fault code A10 being 'Fill Valve Triac' but as not an engineer what is that? and what parts are needed and or


Hi the fill valve triac is the plastic vlave that the inlet hose connects to you can get them for about £10 you reset the machine after replacing it by switching it on, pressing the power button leaving it off for about a minute then switching ... Dishwashers

Hi My fdw70 dishwasher blew and smoke started coming out > I replaced the fuse and it was fine for a couple of cycles and now keeps coming up with the A10 error code . what part shall I change where is it and what does it look like > Cheers James


... Dishwashers

I have a problem with a dishwasher Whirlpool ADP6947, error code Fb. I need the service manual for them. Thanks


... Whirlpool 24 in. ADP6940 Dishwasher

Asko 1555 Dishwasher will not drain. Bottom of kick panel pan will fill with water triping the float switch?, leaving an error code. Is it safe to assume that the out pump needs replacing. I had the kick panel off and smacked the motor housing a few times and it ran for a few loads, but is now again stopped working.


It might be the pump, or it might be an obstruction elsewhere. If you have an air gap on your sink/counter top, open it and check for debris. If it is clear, unscrew the main filter basket. There is a black plug on the left side of the bottom well ... Dishwashers

I need support on a dishwasher. The brand is National. Getting an F2 error code. Model UCWNLW88


F2 error usually means there is an accumulation of water (perhaps leaking or not able to drain the water from the DW).If the appliance was recently installed, then it's more likely to be an installation issue with the drain, perhaps the p ... Dishwashers

My Smeg dishwasher shows error-code E5. Which part should I replace?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2269 seconds