Having problems with your LG 24 in. LDF7810 Built-in Dishwasher ?

We have been told it is the motor which is locked, and it stop working, is there a way to fix it without going to an appliance store, can i fix it myself and what would i need to do

\015 The dish waher turns on after a few minutes it starts to beep and The letter LE starts to blick,\015

Answers :

The diagnosis is correct. the windings in the electric motor are separated and damaged. replace this motor asap if possible.
Repair Help & Product Troubleshooting for LG 24 in. LDF7810 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have been told it is the motor which is locked, and it stop working, is there a way to fix it without going to an appliance store, can i fix it myself and what would i need to do


The diagnosis is correct. the windings in the electric motor are separated and damaged. replace this motor asap if possible. ... LG 24 in. LDF7810 Built-in Dishwasher

Hello, I have a Fisher Paykel Double dishwasher (DD-603) - about five years old and then top unit is literally going nuts. It turns itself off and on, beeps constantly, and will not run through a cycle. What is causing this issue and how can I go about fixing this problem?. What parts do I need to buy? How do I remove the front panel of the dishdrawer to fix this problem? Do it yourself repair instructions would be terrific.


It sounds like it needs a new computer board (the whole thing) so you cant do it yourself it needs to be orded in. \015\012\015\012If you have any questions please dont hesitate to ask ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I NEED HELP CLEANING OUT MY FILTER ON MY HOTPOINT DISHWASHER..... WHEN WE GO TO RUN IT THE WATER STAY'S IN THE BOTTOM AND WILL NOT DRAIN OUT SO PLEASE HELP ME FIX MY PROBLEM CUZ I CANNOT AFFORD RIGHT NOW SOMEONE COMING OUT TO LOOK AT IT SO IF I CAN FIX IT MYSELF THAT WOULD BE GREAT AND WITH YOUR ALL'S HELP IF YOU WILL THANKS ALICIA


I f you have warranty on this please call them, you have a defective\015\012D/W.Unless there is no charge for repairs ,don't spend a dollar on what\015\012is going to be a on going problem ahead.To explain how to fix this is\015\012what the manufactu ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The fuse in the plug keeps blowing. Initially it would run for a while - sometimes 3 or 4 cycles - before blowing. It now blows the fuse the second that I plug in to the socket, even with the on/off button on the front of the dishwasher set to off.I'm keen to take it apart, but it's full of water as it blew mid-cycle. Is there a clever way to empty the machine without the power being on, or do I need bits of hose and sponges?A schematic blow up would also be extremely helpful.


Lower the outlet hose into a washing up bowl, it should then Drain. Check the heater to see if it is earthing you get to it by removing the right hand side panel. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have an old Bauknecht dishwasher GSF 3160 S that a friend gave us 10 years ago. It was stored for that time, and now if I try to use it, it leaks out through the bottom and floods the kitchen. I would like to know 1) is it worth fixing from the point of view of how energy/water efficient (or inefficient) an old dishwasher is - if you know the specs for this particular machine, and 2) what needs to be changed if it is worthwhile fixing. I don't know what else might not work, because I only pu


... Bauknecht Dishwashers

I have a maytag portable dishwasher that I paid over 500.00 that I would not give 10.00 for another just like it. We have had it a little over a year and I don't use it. It has never thrown all the water out after each cycle and then it over flows. I can't leave it washing and go about my other chores because I can't trust it,so I wash my dishes by hand. I am 58 yrs. old and I am having to go on disability due to an illness and I need my appliances to work.I have a Maytag washer and I like it ju


Call whirlpool at 800-874-4698 have your model and serial handy, tell them what is going on would not mention the 10.00 thing, be nice as you can and ask for some help with this issue and they may help you As dad says it caint hurt to ask\015\0 ... Dishwashers

Blanco BFDW6 dishwasher drains and sounds like it is going to start but stops after 2-3 seconds. Yesterday it was playing up and made a fairly small puddle on the floor. Electrics seem to have been a problem from early on as after a few months it would let me open it during the beginning of the cycle to add items without needing to restart program. I am not sure if problem is electric (may need a reset?) or due to anti-flood feature.


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Hi, I have a whirlpool ADG 7340 dishwasher and it's failing to run a full cycle (it just starts beeping constantly about half way through). The light is flashing 4 times so I guess that means it's fault number 4 but I have no idea what fault 4 means & how it would need to be fixed.


... Whirlpool Dishwashers

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

I have an indesit dishwasher dif16, suddenly it stopped going through its washing cycle, at present it will fill with water and the powder door will open it makes a noise as if a motor of some sort is running and thats it, it will not wash, if i switch it off the appliance the water will pump out, please can you advise what i need to fix this


... Indesit 24 in. D61 Free-standing Dishwasher

The handle on the dishwasher is broken and the door doesn't shut all the way. I removed the screws to look inside and there are wires that go into this component that is connected to the handle. Is this something I can fix? How would I find the parts.


... Amana 24 in. ADB2500AW Built-in Dishwasher

The touch pad for favorite setting and start don't work. The only way we can make it run is by using delay start. Would like to fix it ourselves if someone can tell us what needs to be replaced. Thanks Sue Andrews [email protected]


Your looking at either the main control board or touchpad. I would say 80% controlboard 20% touchpad. Does the bottom light up when you touch the start button or delay button?James Memije\012Head Technician\012Accufix Applianc ... Frigidaire 24 in. GLD3450RD Built-in Dishwasher

Not working It just stop working , I need to find a solovesion, or I would like to know how much it's going to cost to fix it.


... Kenmore 16342 / 16344 / 16349 Built-in Dishwasher

Bosch Dishwasher My 8 year old Bosch is not draining. It will not go past 1 minute on the rinse cycle, and 13 minutes on the regular cycle. For the past few weeks I have noticed a lot of bubbles in the bottom of the dishwasher after it is done, but it was draining. Now it's full of water and will not go past the 1 minute mark. I need to fix this, I can fix this, I just need some expert advise on how to do this myself. Thanks!


What is the model #?... there are 2 buttons when pushed together it will drain the water out..try the button to the left next to power scrub... and economy...hold the 2 buttons for 3 sec. you will hear you drain pump running.. if you don't hear any ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a Fisher and Paykel drawer dishwasher and I'm wondering if there's a way to put a panel on it to make it look like and integrated dishwasher. It would need some way of the panel moving to start the dishwasher because the controls are located on the front. I plan on putting it in an Ikea Akurum that is 24" deep. The dishwasher is 22-9/10 deep, so that looks like it would leave some space for the dishwasher to sit back in the cabinet so the door panel could be flush with the cabinet. I'm no


Hmmmm...the first thing that comes to mind is to check out ApplianceArt.com. they have alot of panel options. I'm not sure if they have the integrated ones you are looking for but they have cheap options for everything else. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Blinking clean light on my Kenmore 665.17052400 7 times Did the "reboot" normal wash,heated dry sequence which made the machine work for a while. then it would go less times in between needing to be "rebooted", now it will not go through a cycle w/o the clean light blinking even following a reboot. what is my next step? I have heard that this means the microprocessor will need to be replaced. is it even worth it?


No its about a buck forty but im sure you could do it your self ... Dishwashers

Whirlpool - Quit Partner I - DU1048XTP: Start at the beginning - Dishwasher would go through most of it's wash cycle and stop and the 'Start/Resume' LED would start flashing. Would press 'Start/Resume' and wash cycle would start again and run non-stop. Would have to hit 'Cancel/Drain' to stop. Called local service tech and he said board would need to be replaced. First board he brought failed right away, second board was installed. Tech also replaced latch handle assembly because it was missing


Have you asked the technician if the water temperature is OK.\015\012\015\012Run it again and after 30 minutes cancel and see if water temperature is warm or not. If not warm enough, then likely causes are heater is faulty or if you are u ... Whirlpool Dishwashers

Kenmore Elite I replaced most of my appliances 3 years ago with Kenmore Elite and I've had problems intermittently while the appliances were under warranty, but when the repair person arrives, no problem is detected. Once the appliance is no longer under warranty, the problem becomes persistent. At one point when I explained the difficulty, the technical support person said something to the effect of, "Oh that's an easy one to fix. All you need to do is...Oh wait, the warranty expired on the 3rd


Hmm, I'll start at the top :->. Well, first thing is that Kenmore doesn't manufacture any appliances. The only thing Sears has is the name recognition, therefore, they have GE, LG, Whirlpool, and others to make appliances for them and Kenmore s ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

Hello, My built-in Jenn-Air JDB5900AWB dishwasher door has lost it's springs and comes crashing open. I am pretty handy and would like to try to fix this myself, is it possible? I have a great parts store here that the plumbers use (I was the only person there who wasn't a professional that day!). Where can I see instructions to fix this? Thanks, Miss Fix It


Hello, Welcome to FixYa.While I don`t have diagram or illustration I can give some insight because this is actually very common.It is a fairly minor procedure to replace it/them. Slide the entire unit out from the cabinet a co ... Dishwashers

My Kitchenaid dishwasher failed to drain. Is there a way to fix this without calling in a repair person?


Check underneath and disconnect the drain hose that leads into the pump to see if there is something blocking it.  I had a similar problem and the technician found a cherry pit that was blocking the hose.  He told my wife that it was a ... KitchenAid KUDK03ITBK Built-in Dishwasher

Viking professional dishwasher DFUD142 panel lights flashing, and cannot turn of pump, need to cut power, will not go on? worked perfectly 4 yrs. what to do? repair man did not fix.


... Viking DFUD142 Built-in Dishwasher

I have an Optima series G1470 or G2470 dishwasher with a heavy panel on the front to match the kitchen cabinets. I want to tighten the door spring so I can open it more gently. House guests tend to let go of the door part way down and it bangs open the rest of the way. Also, I have not put salt in. Do I need to in Wisconsin? If so, what kind of salt do I use? Thanks, MJ


About the use of salt depending on water hardness, there is a very good explanation on page 11 ... Miele Premier-Plus Built-in Dishwasher

A part came flying out when I tried to use the handle to open my dishwasher.I now cannot open it without a screwdriver. How can I fix it? What part do I need to fix it.


If the handle is off then you only have to take off the outer door panel. then replace the screws. ... Dishwashers

I have a Bosch SHU9915UC/U11 dishwasher, installed in 2002. Recently, our hot water heater had to be replaced, and we were without hot water for five days. Air got into the hot water pipes, and dried out all the debri in the lines. When we got the new hot water heater going, all of the sediment in the pipes ended up in the in-line screen filters in various appliances (clothes washer, etc.). I have cleaned these out, and these appliances are fine. Since then, the dishwasher has been shutting


All inlet valves have a screen built into the valve itself,shut off the water remove the entire valve and you will be able to see built in screen,if you flush out the debris from it and re-install the valve it should work fine.  ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I have a hobart lx-g model which i purchased used a month ago. At the start everything worked great...then when ever i would push the "off" button it would shut down and restart by iteself... lately i've been getting lots of error msg's (one was E4...) and now it overflows all the time, its as if it's gone banana's... what do I need to do to fix my problems (chane the cpu???)


Hi,Initially would suggest to check that the power supply requirements are satisfied. You might also need to check the breakers. Depending on the exact model number, the AC supply can be as shown below: ... Hobart Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0934 seconds