Having problems with your LG 24 in. LDF7810 Built-in Dishwasher ?

Question regarding my lg dishwasher circuit board. a wire melted the plud receptacle han broke off


Answers :

Hi,

I have Uploaded the Service Manual for you :-

http://rapidshare.com/files/369176381/LDF7810xx_Service_Manual.pdf.html

That Service Manual would have all the Details and Schematics that you need.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
HI. I would recommend to replace the entire harness. This would be the best solution. Something caused that circuit to overheat, and the harness may be the culprit. It could also have been an over current issue, due to a surge. In order to direct you to the appropriate parts, I will need the entire model number that is mounted on your unit. To the best of my knowledge, I am sure that the suppliers will not carry the single plug you seek. You will need to purchase a replacement wiring harness.
Repair Help & Product Troubleshooting for LG 24 in. LDF7810 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Question regarding my lg dishwasher circuit board. a wire melted the plud receptacle han broke off


Hi,I have Uploaded the Service Manual for you :-http://rapidshare.com/files/369176381/LDF7810xx_Service_Manual.pdf.htmlThat Service Manual would have all the Details and Schematics that you need.Let me ... LG 24 in. LDF7810 Built-in Dishwasher

Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

Frigidaire dishwasher Rylee, the circuit breaker is fine. There is no fuse on the dishwasher according to the owners manual, the parts manual and the wiring diagram. There is no timer selector switch on this model. While I changed the control circuit board, the only other thing I can think it would be is the control panel with the buttons on it. What do you think


Hi Todd,As a rule:\015\012\015\012Black Smoke = Unburnt Fuel, incomplete combustion, bad mix\015\012Blue Smoke = Burning Oil\015\012White Smoke = Water Va ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

We have a Bosch SHU9925UC dishwasher, installed in 2002. In August 2010, the water didn't drain, and a service technician discovered melted wire nuts at the main incoming power junction, presumably due to a loose connection there. He re-wired it. Now it's March 2011 and yesterday we smelled electric fire smoke coming from the dishwahser, opened it up and again found melted wirenuts. So is it really just poor installation, given that now 2 different installers have created the same problem?


... Bosch SHU9925UC Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

Burnt wiring insulation dishwasher & aluminum house wire


Your problem is most likely the aluminum wiring. Begin by running a copper line to your dishwasher eliminating the aluminum. use Romex Building Wire, NM-B 12/2 with ground and a 20 Amp circuit breaker ... Dishwashers

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

TV static I just installed a new dishwasher. When it is running, it causes static lines on the TV. Prior to the new dish washer, I did not have this problem. It is wired correctley, and not on the same circuit. As I stated I did not have this problem until the new dishwasher. I called the service people for the dishwasher, and they stated they could not help me. Have you got any ideas, or do they make some type of filter I can put on the line to the TV.


There should be a suppressor fitted to the mains terminal block on most dishwashers. if this is not the case you will have to get hold of one you plug in. regards ... Dishwashers

Have a 15 day old Thermador Dish washer direct wired to the circuit breaker, replacing a DW that was there for 10 years. Wiring is the same age. The unit will not turn on and I took the cover off the electric cover the hot wire had melted the connection. what's going on? model DWHD630gcm


... Thermador DWHD630GCP Dishwasher

Bosch dishwasher white wire connection in machine terminal box got hot and melted the wire nut.


... Bosch Dishwashers

I bought this dishwasher 5 years ago and was kept in the box until last month. I installed it, turned on the water and no water is being pumped into the unit from the water release valve in the dishwasher. I then checked all the cycles and everything works except for the pump. Then I checked to see if any power/volts was going to the pump and there is none. Could it be a wiring problem or could it be the circuit board?? please help. thanks


You will have to check all the connections visually. Since you know how to use a meter, see where the current stops. See if there is current coming from the control board to the pump. the water inlet solenoid valve should "free flow" water into the m ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Wiring diagram Thunder storm, lights went out, may have been a spike on electric circuit, every thing ok but HOT-LFT228A dishwasher dead. All fuses ok but control panel blank. Is there a reset somewere? , can't see anything obvious and no joy trying to find wiring diagram.Thanks for any help RL


See the basic diagram and use the VOM for fix it. God bless you ... Hotpoint-Ariston LFT 228A 23 in Builtin Dishwasher

I can not turn my dishwasher on. It is acting like there is no power. Model number gu2275xtvq0 I have checked circuit breakers and wiring to dishwasher. Any suggestions?


Check timer and power, motor ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My Hotpoint FDW20 dishwasher does not heat up and is washing cold. Could you, please, suggest a solution to the problem. Can you also forward me a circuit diagram for the machine along with a manual with the location of various sensors, switches and other electrical components and the wire colouring to these components. I am an electronics engineer by profession so if had a circuit diagram and a legend of the various sensors and switches along with their location on the machine it should be pos


Hi,Check your heating element.. \015\012A bad heating element causes many problems in dishwashers...Dishwasher Problems The Heating Element n ... Hotpoint Dishwashers

Dishwasher problem Our Asko 1353 dishwasher stops halfway through its's wash cycle. I suspected the thermostat, as it seemed loose in it's holder and not tight against the tub. After I tightened the holder the problem is still the same. Also, the on/off switch (pressure switch?) does not stay in the on position and when I looked it over I found one of the crimp on terminals had melted. Short circuit? Too much resistance from bad thermostat? How do I check the thermostat before I order a new one?


I think your switch may just be bad,but to check the t-stat remove both wires and use a multimeter,set the meter to ohms and connect the two leads to the terminals on the t-stat.with the t-stat to off you should read an (ol) open condition,when you t ... Dishwashers

Burnt wiring on Bosch SHX46A06 Dishwasher


Bill that is exactly what happened, the connection wasn't correct from the start. The Bosch dishwasher pulls 11 amps during the cycle while heating the water to temp. The cooler the water the longer the heat time. Your dishwasher came with a set of w ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher is Amana ADB 2500 AWB. Door handle broke. Installed a new Latch Assy. (many buttons were pushed during process) Now .. door latches good. But when start is pushed, nothing happens. (all the cycles and options will light up) Is there a reset button? Could I have connected a wire incorrectly?


... Dishwashers

Miele dishwasher model G892SCU Plus Type HG01 Won't turn on. No lights on panel. Hard wired. Checked circuit breaker in panel. Not tripped.


... Miele 24 in. G892SCU Plus Built-in Dishwasher

A wire got crossed and appears to have short circuited my Kenmore Dishwasher model 13759. Small puffs of smoke came out the right side of the push button area. I assume the control board got fried. Is is likely anything but this will need to be changed?


Hi\015\012\015\012You'll may need to replace the control panel if the smoke was coming from the control panel. However, the smoke can be due to a burnt wire which may have got short circuited. You'll need to check the control panel for sh ... Kenmore 13759 / 13754 / 13752 Dishwasher

Hiya, I have a Bosch Dishwasher SGV4313GB that wont heat the water, it gets stuck with cold water continually washing (pre wash??) the delf. Its a built in and I have opened the inside metal panel and exposed the control unit (PCB) there is no blackened/loose soldered joint to be resoldered. I am at a loss as to what else in the heating circuit to look for. Can you point me in the direction of what I should look for next? Kind regards Mark


... Bosch Dishwashers

We have a classique dishwasher (cl 6 s-2 made in italy) has been not use for a while. when we want try how is working condition , turn program swith at half way and push on in 3 minits , have a electric shorting sound. after chack found 1, forget turn on water 2, at electric wire in the boteem one small cylinder part have burn. the main supply circuit breaker in the house when the short occured.


... Dishwashers

Dishwasher won't start. circuit breaker not tripped, no reset button where wire connects, fill-level float not stuck in up position


According to what you are writing, it leads me to believe it is the latch switch is broken.\012As long as the machine believe the door is not latched closed it will not attempt to start anything. ... Dishwashers

I have a MDB6759AWS3 that is one year and two months old. This morning I went to the control panel to press the buttons and some would light up and others would not. I disassembled the inner panel and looked at the "computer like" flat ribbon that connects the control panel to the main circuit board and noticed that some of the wires in the flat ribbon had deteriorated. I put it back together and pressed the buttons and they flash very dimly for a few seconds and got the dishwasher working bu


You may want to check the warranty iif it is a maytag or whirlpool, some have a 5 year warranty on the control and board. If not you can go to www.searspartsdirect.com to l ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1918 seconds