Having problems with your LG 24 in. LDF 7811 Built-in Dishwasher ?

My LG Dishwasher model LDF7811WW was getting louder and is now throwing a code FE error. Is this an expensive repair.


Answers :

Hi
\015\012\015\012


\015\012Thanks for using FixYa. Error FE in your Dishwasher indicates excessive\015\012water is supplied than the normal water level. If the dishwasher is overfilling it's
caused\015\012because of water-inlet valve going bad. This valve is usually at the bottom\015\012left or right of the dishwasher, behind the lower access panel. It's the device\015\012with the main water line from the house, a rubber tube to the dishwasher, and\015\012two wires attached to it. If the water-inlet valve is defective, you need to\015\012completely replace it. Please accept the solution if the issue is\015\012resolved or post a comment for further assistance.
\015\012
\015\012Thanks

\015\012\015\012

Rylee

Repair Help & Product Troubleshooting for LG 24 in. LDF 7811 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My LG Dishwasher model LDF7811WW was getting louder and is now throwing a code FE error. Is this an expensive repair.


Hi\015\012\015\012\015\012Thanks for using FixYa. Error FE in your Dishwasher indicates excessive\015\012water is supplied than the normal water level. If the dishwasher is overfilling it's ... LG 24 in. LDF 7811 Built-in Dishwasher

Model#lds5811bb--started making noise coming from the water inlet area(bottom left). 3/4's of the way through the cycle, noise became louder and then an error code "le" came on. We tried turning breaker off, then we tried in the rinse only cycle, but 5 minutes into it the "le" code error came on again. I'm fairly handy, so I'm not sure what part I can replace to maybe solve the problem. I can't afford to spend a couple of hundred dollars for a repair man to fix it. I'll appreciate any suggestion


The LE code is a locked motor code. Something may have gotten into the pump impeller. I would take the screens and filters off and clean the and check the pump for something stuck in it. It could also be the motor going bad but I would check the obvi ... LG Dishwashers

Kitchenaid kuddo1dppa I own a KitchenAid KUDD01DPPA, 2 drawer dishwasher. I am not a technician, however I have had a lot of experience in repairing various appliances and am savvy with electronics and mechanical technical issues. Here's the problem: I was getting rinse error codes in both drawers, pulled the bottom drawer out, removed the cover to the circuit board and used a dryer to dry up the moisture on the flood switch. Now I am getting Fill Failure error code on both drawers. I have g


Test this steps and fix it. God bless you\012 \012 Water Inlet Valve\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Dishwashers

Bosch SHE44c getting a E6 code????Just finished E1 code by re-soldering the board and the first wash after fixing that error, I get an E6 code and it did not drain. During the repair of E1 code, I cleaned all hoses out and made sure I had no problems...What is the troubleshoot to search for E6 code?


Thanks, that perfectly nailed my problem. Bad / burnt solder joint on a SHX45P05UC/57 model. A little solder, and it may last a while. But next it fails that way I can order the motherboard without even opening it up. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

We have a Kenwood KDW8ST2A dishwasher. We used to get the error code E3 (when still under warranty) and were told not to use dishwasher tablets as it generated too much foam. The problem has been intermittent but now we get the E3 error every time, no matter what program we run, or how little detergent we put in. I've a feeling its not heating up properly, is there any way to check the heating element? Is it worth attempting a repair?


... Kenwood KDW243A Builtin Dishwasher

Hi There, I have a F&P Dishdrawer Model DD601v2. The top drawer has come up with an error message U3. Can you please advise what this error means and maybe how expensive it could be to repair or whether it's worth repairing? Many Thanks


This applies to all DD601 ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I have a 13 month old Bosch SHE58c dishwasher. The pump runs constantly and will not refill the tank. There are no error codes thrown on the control panel, but not sure there are error codes for this model - the manual doesn't mention any. So I have removed the side panel and can see the bottom pan is bone dry and I made sure the overflow drain switch was not bound and operates freely. Is there some type of reset button or other task I can perform to continue troubleshooting this problem? Repair


I have exactly the same problem. Turn on the machine and it just pumps and pumps, door controls do nothing. According to the technician who came and looked at it the problem is a bad control board. He ordered the part and we are waiting on it. ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Have a lg model lds 5811st model dish washer for a little over 2 years and had the le error button .called technican replaced the motor now 4 weeks later the same error button.and the cancel button wont release the water standing in the bottom.also cant get repair man to garanty his work or parts.


Take off the door cover and you will find the wires melted into a black blown in insulation. Carefully free the wires and run a quick check to see if any of the wires are broken. If they are cut them and splice them back together. It takes a while ... LG LDF6810 Built-in Dishwasher

Our LG Model LDF6810ST Dishwasher (2 years old) does not heat water any more. Dishes do not get clean and do not get dry. I do not get an error code. I assume I need to replace the control board OR heater assembly. How do I determine how to solve the problem?


It cleans poorly ------\015\012\015\012\015\012\015\012\015\012Water-inlet valve\015\012\015\012Most cleaning problems are caused by the dishwasher not getting enough wash water, so the water-inlet valve is often to bl ... Dishwashers

I have a Frigidaire 4000 Series Dishwasher, Model# FDB4315FCO, almost six years old. It acts as if there is no power. There is no error code. If I pull the power cord I get a "PF" message.


... Dishwashers

Danby Dishwasher DDW1806BSL Dishes weren't getting clean for awhile. Now, we get an E3 error code and it won't continue through the cycle. There are no repair services in our area for Danby. Help!


Fault Codes E3: Longer heating time, but required temp not met. Possible Causes: Malfunction of temp sensor or heating element. ... Danby DDW1806BSL Stainless Steel Built-in Dishwasher

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

I have an Electrolux dishwasher Model # EIDW6305GS1. I am getting an error "01", which means a leak is detected. It did this 5 months ago and the repair man replaced the pump and control panel. Now, after it happened again, I contacted Electrolux. The sent me a Leak Repair Kit, but with no instructions. I contacted Electrolux again and they said that they could not provide the installation guide. Can you help me located the installation guide or offer assistance?


... Dishwashers

Fisher & Paykel DD603 Error code F2. My top dish draw is showing the error F2 , I have taken out the baskets, spray arm, propellors. The metal shaft is completley frozen, I can't move it at all. I see other posts say to wiggle it to free it but that doesn't work here. Can I get a copy of the service manual too? We are along way from a repair man to come look and I like to try myself before spending more money on it. My e-mail is [email protected] Thanks.


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Have a dishwasher with only model number i can find of DW009H. I am getting E6 error code and do not have a manual. Where can I get a manula ? who makes this dishwasher


... Dishwashers

Bosch Dishwasher has error code e24, I checked the line, replaced with new pump, new control unit and call repair man no luck. It works on and off. I get it run then next cyle nothing. Heelp!


... Dishwashers

My bosch dishwasher model shx45m runs for hours. It gets down to the last minute on the cycle time and then will not move on to the next cycle. The error code is 01.


... Bosch Integra 500 SHX45M0 Built-in Dishwasher

Hello, my hotpoint ultima FDW85 keeps coming up with a H20 error code, even though the water s getting through ok it stops partway through a cycle, how can i repair this? Many thanks.


... Dishwashers

Hi there,we are getting error code 004 coming up on our dishwasher, make is Heller, model is HDWE 12, as we don't have a manual,thanks


I have the HDWE12/SS manual, the following may help, or not!\015\012\015\012According to my manual error 4 means it is "overfilled", and the possible cause is "too much inlet water". I doubt that is much help but that's all the manual say ... Dishwashers

The power is going to the dishwasher. The on off buttons work. No error codes. The salt light is lite (has been for 5 years) but now I get zero response when shutting the door (after selecting any of the 6 run options). There is no noise, no water, nothing happens. How do I repair this dishwasher so that it will run again?


Door switch failure. This will shut down all other start options. Inspect and possible replacement. See if you can activate it with something with door open. Give it a good close look... ... Dishwashers

Getting error code 0E on LD-14AW3 model dishwasher after 2 minutes. Checked drain hose and water seems to be coming out but won'y go any further in cycle Also makes a loud humming noise when running.


To little info, but looks like pipe is much to low. Not getting the opportunity to fill up properly.Raise it higher.(Im asuming that you can hear the drain pump run and water is being pumped out as wall. ... Dishwashers

I have a fridgidaire dishwasher, model PLD3460. Getting no water, cycle selector is stuck on on china setting. It did show an error code of EE. Any ideas?


... Frigidaire 24 in. PLD3460 Built-in Dishwasher

Hi I have a GE Dishwasher model gsd2200g -03 and I am getting C1 & C2 error codes but it seems to be working fine. I disconnected the drain hose and the water appears to be draining properly


Hello there: if you have installed a new garbage disposal make sure the knock out has been removed if removed then check the drain valve in the pump hope this helps you out sincerely D.Jones ... GE Profile PDW9880NSS Stainless Steel Dishwasher

Getting error code LE after starting any cycle. solenoids appear fine, the drain hose is not blocked, and the hose is up over 30 inches above the floor... Model LG 24 inch LDS5811WW purchased about a year and a half ago


Http://spares.bigwarehouse.com.au/file.php?document_id=5831Check out this web site. Has trouble shooting methods not mention in manual ... LG 24 in. LD-12BW5 Free-standing Dishwasher

LG dishwasher Model: LDS5811ST getting error code: 0E


OE is a drainage problem...check for twist or obstruction in drain hose .. make sure filter screen is clear... Hope this helps.. ... LG Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1558 seconds