Having problems with your LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher ?

Parts for LG Dishwasher take weeks to get.

\015 How long should it take to obtain parts for an LG Dishwasher. Model # LDF7811ST. Specifically, the motherboard? \015\012\015\012I'm more than 2 months without my dishwasher and the repair folks don't seem to have a clue.\015

Answers :

You could order direct... maybe quicker\015\012http://www.lg.com/us/support/parts/support-find-parts.jsp\015\012I got my part in 3 days
Repair Help & Product Troubleshooting for LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Parts for LG Dishwasher take weeks to get.

You could order direct... maybe quicker\015\012http://www.lg.com/us/support/parts/support-find-parts.jsp\015\012I got my part in 3 days ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I had a mouse get into the under part of the dishwasher. He/she/it got trapped and died. The smell made us aware of the problem. I had to take apart the bottom of the dishwasher and take out all the tubes to clean them. Very messy... My question...I took care to note where all the wires went, but somehow did not take care to note where all the tubes go. Can you advise or show a schematic. I have a Bosch SHy56 stainless dishwasher.

There are no diagrams available of this - however using some logic - you can figure out the path of the water.A picture of the bottom of the washer would be helpful as well.Water comes in from the water inlet hose to the pump. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I have a Whirlpool Quiet Partner I (DU920PWKQ0) that the detergent dispenser door is not opening to allow the detergent out during the cleaning cycle. So, the dishes are not being properly cleaned. I do not regularly run a dishwasher cleaner through the dishwasher like some sites recommend. Is this problem more related to cleaning than mechanical ..... If it is a mechanical problem, can I take the door plate off the inside of the dishwasher and get parts if needed??? without a service vist? Than

... Whirlpool Dishwashers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl

If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c

You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

I need to take apart the inside of my whirlpool dishwasher and can't get the mesh filter part under the spinning arms off it has a plastic part with a metal screw in the middle.

... Dishwashers

I have a 1999 bosch SHU 4300 dishwasher given to me. It worked great for about two weeks. Now it takes for ever *3-4 hours* to complete a cycle (if it does). I have opened the door to see it filled with sudsy soap after this long. I have checked the hoses and they are not kinked. Once the cycle of cleaning is over, If I reset it manually, it will rinse the dishes and empty just fine. But I have to manually get the dishwasher to advance to the rinse and dry cycle every time now.

Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch 24 in. SHU43 Built-in Dishwasher

What's a reasonable price for a dishwasher service call? How do I find someone who knows what they are doing and not just a random 'repair' guy? Should I expect them to have the parts on the truck or will I have to pay them for the time it takes to go get them?

You get what you pay for. The "random" repair guys usually yield random results. Some of the independent guys are very reputable and offer great service at a fairly reasonable price. Some, however, can lead to the need to call a follow up repair c ... Maytag MDB5100 Dishwasher

My Whirlpool Gold dishwasher has been wonderful until recently. In the last 2-3 weeks, the top rack of dishes does NOT get clean - AT ALL. It appears that the spray arm is not moving, or at least not moving much. What can I do myself to check this out and possibly take things apart to see if something is clogged?

Take a tork #20 screwdriver and remove the screen go all the way to the choper and make sure its not broken on clogged. ... Dishwashers

I have the part to fix my dishwasher. The handle broke. I do not want to take the door apart and not get it back the way it should be

Dishwasher not draining where is the filter located ... Jenn-Air Dishwashers

Stupid neff semi integrated dishwasher is doin my head in... it's about 10 years old and the wooden panel fell off.... the 2 plastic parts at the top where the screws go into are stuck in the door.. do i take the door itself apart to get them set in right again?????

Hello,W/D here.Almost everything that is attached to the doors is fitted from inside the door panel. You'll need to remove the inner door to get at the parts. The screws are around the inner edges and the top; not all are of the same len ... Dishwashers

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee

Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

My dishwasher filter keeps getting plug up with large food particles. I take it apart and clean the screen. It works for a 2-3 -4 weeks before I have to do it again. There is a spinning fan on the screen. I'm wondering if this scrapper fan is working at all. If it was I think it would keep the small screen free from particles. The first thing that happens is the top cleaning arm stops working.' Thanks

Hi Judy. The only way to know for sure is to power up the fan independent of the machine and see if it still works. In the meantime, rinse and remove all debris from the dishes prior to placing them in the machine, including pots and pans. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a jenn air dishwasher (floating glass door). The top cap of the door ($5 black plastic strip) broke and I need to replace it. Do you have instructions on how to take the door apart to get to the part?

... Jenn-Air 24 in. JDB1080AW Built-in Dishwasher

Over the last several weeks the dishwasher is getting the dishes less and less clean. I am sure the loading is not the problem, the water is OK and the detergent is OK. Is there a filter I can clean...or can I take something apart to clean or to check?

Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. Please make sure that the soap is\015\012stored in a dry environment and it is not stale and clumping together. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Hi :) We have a Bosch slimline dishwasher type SRS56A02 GB/08 - it doesn't draw in water - the timer counts down but nothing happens. We checked these pages and cleaned the filters on the inlet water line but no change :( I saw that it might be the inlet water valve - is this easy to get to - do we need to take off panels? if so, is there a manual available please? Over the past week or so it had got noiser - it was at its quietest while the water was draining out of the machine.

... Dishwashers

When dishwasher drains the water not all the water is drained. Some stays standing at the bottom and starts getting an odor after awhile. This is a replacement dishwasher in a 35 year old house. How important is the air release part in the draining situation? I was told by someone that the newer dishwashers have the air release part which was not hooked up on this dishwasher when installed last year. Are there some other possibilities of things that can be checked. Model Number is DU

... Whirlpool DU1055XTS Built-in Dishwasher

The dishwasher cycle starts and gets 20-30 minutes in and then stops giving me the - - - like the door was opened, but it was not. If I use extra heated wash, the cycle stops at 63 minutes left. If I use the regular wash cycle, it stops at 43 minutes left. I have to click the resume button to get the dishwasher to complete the wash cycle. This has been happening evey time I use the dishwasher the last 2 weeks. It is Whirlpool dishwasher model GU2700XTSS! and is only 3.5 years old.

Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I suspect based on your description...\015\012\015\012"stops giving me the - - - like the door was opened, but it was not, I have to click the res ... Whirlpool Dishwashers

I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.

... Bosch 24 in. SHU43 Built-in Dishwasher

My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F

Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f

... Fisher and Paykel DS602 Dishwasher

Smeg dishwasher the same problem interference suppression filter part number F3CF70002L is gone. Where can i get one in uk? Can it be another problem with this dishwasher if this part is broken. Can i run without it. If yes how to conect wires 4 colors brown and blue in the lead and red and white in the dishwasher?

... Dishwashers

Dishwasher problems I have a counter top dishwasher and it's not cleaning things like it used to i think its clogged but i cant get to the drain because it is in the bottom i tried draino but it didn't work i also tried unscewing the bottom but i cant get that part out i think there is somthing stuck in there.

First thing to check water hose that connect at back of machine. pull the screen out and clean it. use a pliers. I run my under water then use a q-tip if its clog to clean the rest.\015\012\015\012Then pour a cup of vingar in machine and ... Danby 22 in. DDW396 Free-standing Dishwasher

I have a Danby Dishwasher model # 67638 18052. There is a slight crack in one of the parts underneath that is allowing water to leak out. The part is located in the back corner and it is a pale yellowish elbow shaped connector. Can I get some some kind of glue to seal it, or do I need to get it replaced? It that going to cost a lot? Is it going to be worth it?Thank you for your time.

... Danby DDW1805W Designer Series Free-Standing Dishwasher

Danby ddw1805w dishwasher doesnt cycle. Timer switch does not respond to any commands or move through cycle or turn off when forced to end of cycle. Need help. I contacted Sears parts direct last week and this week they've told me that they dont have the part afterall. Need a repair fast. I am technical and can fix it myself if necessary.

... Danby Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2238 seconds