Having problems with your LG 24 in. LDS 5811 Built-in Dishwasher ?

Replacing LG Dishwasher door gasket/seal with Part # 3920DD3005A

\015 LG DISHWASHER MODEL LDS 5811ST - DOOR GASKET/SEAL LEAKING ON LEFT CORNER\015\012\015\012HAVE IDENTIFIED REPLACEMENT PART - DOOR GASKET/SEAL PN/ 3920DD3005A -\015\012WHAT SEALANT SHOULD BE USED FOR THIS INSTALLATION\015

Answers :

Problem solved - it was not the gasket - it was the vent tube as defined in one of your on-line reported solutions. Thank you!!!
The reason the gasket is not sold separately is that it is crimped in place. I agree that reason for not selling is unacceptable to a good tech or anyone! Yes, I have a solution instead of the $150 inner door LG forces on you, go NAPA Auto Parts buy for $25 Ameriseal 19600 door seal. Tug pull out old bottom seal. Use a small 90 degree carpenters nail puller or similar angle device and bend out the door metal gasket groove, so the new gasket fits, takes 5 minutes. Insert new gasket and cut to length cause you get 10 feet. Now you need to recrimp. I used a tile cutters pliers, but you could use pliers with tubing on jaws to protect rubber. Now recrimp squeeze over the gasket strange as it seems. Your done in 30 minutes. If you find a better gasket, please post for others. \012PS I will never buy any LG appliance again, bad design horrible support, not made to last
Repair Help & Product Troubleshooting for LG 24 in. LDS 5811 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replacing LG Dishwasher door gasket/seal with Part # 3920DD3005A


Problem solved - it was not the gasket - it was the vent tube as defined in one of your on-line reported solutions. Thank you!!! ... LG 24 in. LDS 5811 Built-in Dishwasher

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

I have a Dishlex Global 450 dishwasher and have a faulty seal to replace. The original door seal had a foot on each side and the replacement I received has 45 degree cuts and no foot. Also the bottom seal replacement appears to be a screw-in type where the original was slipped behind a fold in the door. I have been assured by the supplier that I have received the correct replacement parts. Could you confirm the these parts are in fact correct and if they are which way should the seal lip an


Hello Tony. I am as concerned as you are that this is not the correct replacement part. The key to getting the right part is the model number which is on your machine, if you know where to look. Do this, go to this link to properly locate your mod ... Dishwashers

My dishwasher, a Whirlpool DWF B10, is not cleaning properly. When the cycle has finished, there is always a block of undissolved dishwasher tablet/powder left behind. My guess is that the seal to the powder door has gone and allowing the tablet to get wet too early and part dissolve before the door opens - is this likely to be right? If so, can I get a replacement seal or do I have to replace the whole powder & rinse aid containers ??


... Whirlpool Dishwashers

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

Water leak have the Ge triton dishwasher (Model # GSD5320D02BB, bought it n 2001) and currently have very small amount of water leaking out of the door during a run cycle. I did check levels when running and that seems to be fine......meaning the dishwasher is level and not an over-flow problem. My next thought is maybe it is a faulty door gasket. So my question is, where is the door gasket located and how do I replace it? (and where do I order this part from?). Looked for diagrams to follow and


They are in the bottom left and right of the door opening. GE likes to use L-shaped, molded and ribbed seals on most of their models - hopefully also on yours. Typically these can be removed by hand and easily replaced without taking anything apart. ... GE Tritonr XL GSD6260JCC Dishwasher

How do I replace myself the detergent/rince aid assembly on a Maytag Jetclean dishwasher EQ plus model #MDB9150WB? I only need to replace the door, but I don't see a part for that, just the entire assembly. Please advise how to replace myself the entire assembly or can I just purchase a door from the detergent/rince assembly? Thanks, Carol


Carol,\015\012\015\012This is a simple repair. Remove the screws around the outer door edge and separate the door. The dispenser is clipped into position with several screws. Remove the screws and push the dispenser through the door.You can pur ... Dishwashers

I have Whirlpool ADP 962 dishwasher. The front door is leaking when washer is running. I can feel a rubber seal at the bottom of the door, when I open the door, which seal is wavy and corrugated. How do I replace the seal, and what is replacement part number. Thanks Trevor H


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012\012q4w5ifgf ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

When I first contacted you, I couldn't get the soap door to close in my dishwasher. As suggested I got the part. I now have the door apart. When I work the soap latch I can't see what closes the door. The part I was going to replace seems to be working correctly. over


Well IF the piece, the latch, seems to be working OK, then the only other thing it can be, is the Electronic "Drive" from the controller board, or a disconnection between the Controller and the Latch, Sometimes it can be a "Sensor" not allowing the ... Dishwashers

I have a Maytag dishwasher, model #MDB4100AQ. Is it possible to replace the door panel on this dishwasher? I see the relevant part number (99002109) in various online parts stores, but before I order it I want to make sure this is a do-it-yourself job. I can't see any screws or other hardware that's holding the panel in place.


You may not have to deal with the screws. Check out ApplianceArt.com to see if they might have a solution to fit your needs. I know they have stainlesss options, but also colors and designs. ... Maytag Dishwasher

Replacing a dishwasher door cable - GE Dishwasher Repair Part - General Electric Door Cable WD7X14


... GE Dishwasher Repair Part - General Electric Door Cable WD7X14

How to replace the door seal on a Simpson Silencio 850 Dishwasher Model No. 82B850WH. The part No. that I have for the door seal is 0208400158G & is Electrolux part number


The around the tank seal just pushes into the groove. make sure that you copy the way the old one comes out. The bottom of the door seal is a bit awkward. Thsi has some screws that are difficult to access. Take the door liner off and possibly two of ... Dishwashers

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Fisher and paykel Nemo dishwasher,door spring replacement instructions.Can you help ? I haven't stripped the door down yet or aquired a replacement. Thought I'd get some info' first. Can I download a parts and schematic diagram ?


... Fisher and Paykel Dishwashers

Door leak I have a small leak between the bottom of the dishwasher door the lower service panel on the dishwashere. I did replace the seal on the inside bottom of the door along with the other parts that come with the door seal. Could there be a gasket leak around the detergent dispenser or the vent at the top of the inside of the door. I did not check the water lever as was mentioned in a previous question on water level, but the float does move up and down quite freely. Any suggestions as to w


I had my dishwasher leaking alot at the bottom of the doo,r and found out that the steam vent was very cloged with gunk. After taking the vent cover off on the inside of the door and cleaning, then putting the vent cover back on NO MORE leaking. Th ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

I have a jenn air dishwasher (floating glass door). The top cap of the door ($5 black plastic strip) broke and I need to replace it. Do you have instructions on how to take the door apart to get to the part?


... Jenn-Air 24 in. JDB1080AW Built-in Dishwasher

Replacement part for danby dishwasher ddw1802w switch in door


... Danby 17 in. DDW1802W Designer Series Built-in Dishwasher

GE dishwasher - my daughter sat on the door and it opens too far now. Which part needs replacing?


Here's a try.You need to pull the unit out from the hole it's in so you can examine it. Most installations have only two screws holding the two tabs to the counter at the top front. Open the dishwasher door, and look at the very top and ... GE Dishwashers

I have two problems with my GUI1500 dishwasher. The 1st is that when water starts entering the dishwasher I hear a loud hammering/vibrating sound. It's strange, but the sound will stop if I turn on a faucet in the house. The other problem I have is that the soap dispensor will no longer stay closed. The Plastic tab that holds it shut has basically disintegrated. Will this cause the dishes to not come clean? Can this part be replaced? I don't see any visable screws holding it onto the door.


Hi - welcome to FixYa,\015\012\015\012The first problem isn't a fault with the washer, it's a plumbing problem called "water hammer", which is a resonating vibration through your pipes. It's usually caused by a toilet flush valve, but can ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

I have a Frigidaire GLD3450RDS0 dishwasher. With a white door I want to replace door with a stainless steel. What part #?


... Frigidaire 24 in. GLD3450RD Built-in Dishwasher

The Frigidaire dishwasher #FDB658RAC1 door latch is broken. Can the part be replaced; does the door come apart easily?


... Frigidaire Dishwashers

I need the soap door replaced on the Sear Kenmore Elite Dishwasher 665.15954000. Does someone have this replacement parts?


Go to www.repairclinic.com they have everything and cheap. just give the model number and it will show you pictures of every part you will want. they sell individual pieces or ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Broken vent in dishwasher door . Is it replaceable?Where do I find replacement part?


Call your local used appliance man, they do repairs and sales of various models. Chances are they may have one and give it to you, if you promise to give them your future business while accepting their business card. ... Dishwashers

My magic chef dishwasher door springs broke. I need to know how to access the bottom of the dishwasher to replace the broken parts.


Open the back door and see whether the hooking points visible.Look from the front end also to get an idea! ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1555 seconds