Having problems with your LG 24 in. LDS 5811 Built-in Dishwasher ?

Dishwasher is not drying properly and is out of warranty. Saw a post that LG has a free retrofit to fix problem but customer service denies. Is there a recall on the LDS5811ww?


Answers :

No recall.
\015\012You should use water temp 120 to 150 F, and make sure you use rinse aid (such as Jet Dry). Plastic items (like cheap advertising cups or storage containers) do not have enough mass to retain heat and dry very well. Item with more mass (glass and metal items) will dry as long as you conform to listed perameters listed above.
Repair Help & Product Troubleshooting for LG 24 in. LDS 5811 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher is not drying properly and is out of warranty. Saw a post that LG has a free retrofit to fix problem but customer service denies. Is there a recall on the LDS5811ww?


No recall. \015\012You should use water temp 120 to 150 F, and make sure you use rinse aid (such as Jet Dry). Plastic items (like cheap advertising cups or storage containers) do not have enough mass to retain heat and dry very well. Item wi ... LG 24 in. LDS 5811 Built-in Dishwasher

Bosch Exxcel Dishwasher (Enr SMS53E12GB/01 FD 9002) bought in July 2010. Error code 15 and "Check Water Supply" light on at same time. Have checked in-line filter in tap connection and all clear, water pressure OK, no kinks/twists in supply hose. Any help would be greatly appreciated - I'll have to call Customer Service in the end as it's outside of my problem-solving ability, but would like to check whether there's a known reset or fix I can try before I call.


... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

Just purchased and installed the LG LDS4821 dishwasher, instantly got the OE error code when we tested it. After following troubleshooting tips and calling customer service, error code still not resolved. Hose is not kinked, hose is not clogged (as no dishes have even been washed in it), and it's level. Does anyone have any idea what we could do to fix this problem?


Try a test cycle with the end of the drain hose placed into a bucket. If the dishwasher does not pump out then, call for warranty service (In the US, find a ... LG LDS4821WW 24 in. Built-in Dishwasher

I have a Kenmore Elite dishwasher, model number: 665.17263. The clean green light is blinking and unit work work. I had this problem before and the service guy showed me how to press the buttons in a certain sequence which fixed the problem. It was the heating element.


All I had to do was to press the heatdry and normal wash buttons until all the lights went on. This happened before...Gingko was fantastic!! ... Dishwashers

Our 9 year old Maytag MDB6100 dishwasher starts fine. Partway throught the cycle, it stops, but lights on buttons stay lit. Pressing the door closed more tightly restarts the cycle until the same problem recurs again. what is the problem and the fix? We had a recall on the wiring harness that was repaired a couple of years ago.


... Maytag Dishwashers

I have a KitchenAid drawer dishwasher model kudd01dppa and it has a mind of its own starting and stopping in the middle of the night/day and chiming all different beeps and sounds like its computer is glitching out. We had a service person out and they changed the main computer board and it seemed to fix it for a few days then started again. They gave up. They also tried some sort of reset or reboot but nothing has fixed this intermitten but long term problem. Any ideas?


"it seemed to fix it for a few days then started again" (sic) OK, well if this is so, then in my experience you are getting some, sort of Power Bourne Spike, Surge, or Transient, problem. If there is nothing else it can possibly be. Use a Pow ... Dishwashers

Hi I have a maytag dishwasher and a maytag fridge my fridge has been nothing but problems it has flooded my house twice in the past 9 years, the part on the inside are braking that hold the shelves in place and my dishwasher is on a recall that i just found out today. IT has a part called vent inlet that is cracked and the part is no longer available,so is part can i use it with out it in and I need to have a repair person in to fix what ever the problem is that has caused house fires I have no


... Kitchen and Much More Dishwashers

Solve problems with service systems and procedures that might affect customers before customer become aware.


... Samsung Dishwasher Accessories

I have a GE dishwasher model no. PDW9280J00SS. After 5 years of faithful service, it quit draining last week. I am unsure how to fix this. Is this a problem that only a repairman or plumber can fix? Any ideas?


Hi\015\012 \015\012Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no v ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

On 2/18/09, I had a part replaced (due to a recent recall issue) on our Bosch dishwasher, SHU43C06UC. I had not had any problems with my dishwasher - ever - and, since the replacement, my dishes are not being properly cleaned. The Sears repairman who replaced the part tells me that the part he replaced has nothing to do with my present issue and, because my DW is no longer under warranty, I would have to pay for any further services he may provide. 1) What do I need to do to troubleshoot this di


Http://www.boschappliances.com/safetyrecall/dishwasher/default.aspx?pid=BCH0905OIQ001 ... Bosch 24 in. SHU43 Built-in Dishwasher

My kitchenaid dishwasher has a bottom rack allignment problem. Especially when it is fully loaded the right rear pair of wheels often slips down off the bottom track and makes rolling the loaded rack fully in very difficult. I've already had a serviceman come out and he sent me a new bottom rack and set of four rollers and that improves the situation but does not eliminate it. Any similar complaints? Any easy fix before I call the service guy again?


Hello. If you have a new rack and new wheels the only fix to your problem is to either replace the dishwasher all together or NOT put as many items in the bottom rack. I am always bothered when anyone tells me they were sold a new rack because the ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Hi I have a maytag quiet series 300 with model # MDBTT60AWW and it will not start. All the lights lite up but it will not start. I recently just had to replace an element due to a recall so when he was hear fixing the element I asked him what he thinks could be the problem and he said it sounds like it possibly needs a new control panel. Does this sound right and if so do you know where I can get a control panel. Thanks for your help


... Dishwashers

My LDS 5811 LG dishwasher is leaking at bottom left corner of door. I have read a few solutions talking about a retrofit kit to not only fix this problem, but also improve the dishwashers drying function.


Hi,\015\012I have checked those out and it seems that someone was talking out a line there... there is absolutly no other documentation to back up his claims... at least none that I could find...\015\012\015\012That being said.. tho ... LG 24 in. LDS 5811 Built-in Dishwasher

Our SB915WJ doesn't heat water though the heating element is ok, I checked with my multimeter. Is there a mains relay or something i need to change in the circuitry to fix this problem? Does anyone out there have a service manual you can email me? Also the fan drier isn't working, also the relay that is supposed to flip open the soap dispenser doesn't work. The unit is only eighteen months old. I'm not impressed with it's working life.


THERE IS A HIGH TEMPERATURE CUT OFF SWITCH WHICH LOOKS LIKE THE BAK OF A STAINLESS STEEL WATCH IT HAS TWO LUGS THAT THE HEATER ELEMENT IS ATTACHED TO. IF YOU TEST IT YOU WILL FIND THAT IS IS OPEN CERCUIT. I'M NOT SURE WHERE IT IS ON THAT MODEL BUT ... Westinghouse Dishwashers

We had a problem with our garbage disposal and it resulted with water leaking from our dishwasher. The disposal is fixed, I removed the excess water from the dishwasher. I tried to run the dishwasher empty to clean it. It runs but then the E-2 alert shows on the control panel meaning high water level. I read in the book that I may have to have a service person do some sort of a reset. Is this correct?


Contacted the company and they e-mailed instructions to fix problem ... Asko 24 in. 1895 Built-in Dishwasher

The opening latch on the amana sofsound II dishwasher came loose. To avoid a service call, I would like to disconnect the door and haul the door to the repair shop. How do I disconnect the door? This same problem has happend before and I tried to replace the opening latch myself but I ended up having to have a guy come out and fix it.


... Amana 24 in. ADB2200AW Built-In Dishwasher

Problems with Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher. Will not clean dishes and leaves debris on everything! Had it serviced multiple times, changed soaps, tried additives, rinse agent, redirected exit water hose, Nothing works to fix it. It's a total lemon. Anyone else have experience with this unit?


... Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher

The normal light on my Whirlpool DU1101XTPQ7 is blinking. Service company installed a new circuit board but this did not solve the problem. Now they are saying it's the control panel (after the third visit to my home to fix this).


A blinking indicator light means the thouch key that geos with that light is stuck. So yes you need a control panel since the touch pad assembly is installed on it at the factory. I would have them put your old control board in with the new touch pad ... Dishwashers

Flood switch activated no flood or problem with water any way to fix without getting service?


... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Brand new Miele 2170/2180 dishwasher. First time we try to use it, it stops after a few minutes, the warning beep beeps incessantly, and all of the program lights are flashing. According to the manual, we should turn it off and on and then try again, which we did. The problem persisted. The manual says that this may indicate "a technical fault" and we should contact customer service. Unfortunately, they are closed for a three-day weekend. Any suggestions?


It is just possible you have a problem with the drain.if you plumbed the drain to a spigot on the sink trap, did you make sure the spigot is not blanked? the sink spigot will be blanked if it has not been used before to stop water from the sink ... Miele Dishwashers

We have a service contract with Broward Factory Service. My GE dishwaher went out with eater in it, no power. Checked the panel box flipped switch, nothing. The service tech. said the rinse aid cup leaked and ate thru the wiring, and he had read a recall about this. I am checking to see if Model #GSD3610Z00AA, Serial #ZS782757B is on the recall list.


I was trying to find out if the dishwasher was on a recall list, and I did by calling GE direct. It was not, so the service I have is replacing the rinse aid box.\015\012Thank you, ... GE Dishwashers

Hello, I have a Fisher Paykel Double dishwasher (DD-603) - about five years old and then top unit is literally going nuts. It turns itself off and on, beeps constantly, and will not run through a cycle. What is causing this issue and how can I go about fixing this problem?. What parts do I need to buy? How do I remove the front panel of the dishdrawer to fix this problem? Do it yourself repair instructions would be terrific.


It sounds like it needs a new computer board (the whole thing) so you cant do it yourself it needs to be orded in. \015\012\015\012If you have any questions please dont hesitate to ask ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Technical Support, Instructions & Repair Service Dear Yolanda Palacios, Thank you for purchasing FixYa.com's Premium Live Chat Assistance. You should be able to view a transcript of your Live Chat in the My Problems section of your My Profile page at www.fixya.com. Please email [email protected] if you have any problems with this service. This email is your receipt. Please keep a copy for your records. Purchase Details Name: FixYa Ltd ID:51-363488-1 D


Please send a mail to [email protected] They will surely do the needful for you. ... Dishwashers

Dishwasher is locked out. Toddles was playing with buttons and now cant get it to work. I know there's a way this can be fixed for Ive had this problem before and got it fixed very quickly w/o a problem.


Press and hold the lock key for 3 seconds. The button has a picture of a padlock on it. ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

Hi i have a Simpson dishwasher EZIset 52B850wj*05 The problem is the timer that you pull out to turn on and change the cycle will turn but won't engauge into the different cycles. I have had this fixed once and it worked for maybe 1 month and then the same problem & I refuse to pay to get it fixed again especially if it is going to happen agian and again. Toni


HI. This will occur when there are issues that concern the timer motor. This mechanism is responsible for the forward advancement of the timer plate over the dial cogs. if the motor is faulty, it will cause the cycle to not advance correctly. If this ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1025 seconds