Having problems with your LG 24 in. LDS 5811 Built-in Dishwasher ?

I am getting "LE" for an error code. I can't find


Answers :

Hello

LE error in your LG front load washer is displayed when either the motor is not working or the control board thinks that the motor is locked up. A Hall effect sensor is used in these washer which monitors the speed and direction of the motor and then forwards this information to the control board. Hope you understand by now that this LE error is displayed when their is an issue with the motor or when the hall effect sensor sends wrong signal to the control. Conclusion is you'll have to check both motor and hall sesor and replace the part# that is bad, usually I have seen the sensor going bad. Please get back to me if you have any other questions.

Kevin
Repair Help & Product Troubleshooting for LG 24 in. LDS 5811 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Zanussi zt695 gets part way thru wash then stops with Normal light flashing - guess this is an error code bbut cant find on the net and haven't got instruction book


... Dishwashers

Hotpoint fdw70 error code A10 have replaced the inlet water valve but still have an error code flashing A10 hoped to find a reset button but cant find it anywhere can u possibl advise.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I cant get siemens dishwasher to work . An error E25 keeps appearing on the screen . What does this mean ? and how do I get rid of it and get machine to wash ?


... Siemens 24 in. SE20T590GB Free-Standing Dishwasher

Like sand Not getting the dishes clean it seems like sand and other stuf in the glasses :( cant find any extra filters , have clean the regular ones in the bottom of the machine. Please can someone help me find a solution or find a manual online.


Clean out both top and bottom spray arms\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

I have an lg dishwasher mod#LDF7811ST, get error codeIE, changed the inlet valve, machine worked once then got IE error code again. Any suggestions?


If you are getting a IE or similar error on your LG dishwasher and have not been able to solve the problem using information based on that code, check the serial number of the dishwasher. If the first three numbers are between 501 and 702 you may ha ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Error code f4 is the error code i am getting...can't find out what this indicates.


Thanks for responding...I figured out it was the drain line being air locked...blew it out...works like a champ. ... Dacor ED24 Built-in Dishwasher

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Have a dishwasher with only model number i can find of DW009H. I am getting E6 error code and do not have a manual. Where can I get a manula ? who makes this dishwasher


... Dishwashers

Have a lg model lds 5811st model dish washer for a little over 2 years and had the le error button .called technican replaced the motor now 4 weeks later the same error button.and the cancel button wont release the water standing in the bottom.also cant get repair man to garanty his work or parts.


Take off the door cover and you will find the wires melted into a black blown in insulation. Carefully free the wires and run a quick check to see if any of the wires are broken. If they are cut them and splice them back together. It takes a while ... LG LDF6810 Built-in Dishwasher

Err4 came on drain clogged..have fixed but cant get error to stop


Hold the start button in for at least 3 seconds and it should reset ... Whirlpool 24 in. ADP5962 Free-standing Dishwasher

Oe error...manual says clogged but cant find clog


It is important to start where the drain hose connects to the drain. Probably connects indirectly to the garbage disposal. Look for blockage there and work your way back to the dishwasher.IF you can't find a blockage, then it is time to ... LG 24 in. LDS 5811 Built-in Dishwasher

I'm getting an error I cannot find in the book.


The "half E" is supposed to be a T. The code is TE, and means "\015\012Thermistor trouble or very high inlet water\015\012temperature. (over 194℉)" Some people have posted possible solutions on this site. ... LG LDF6810ST Stainless Steel Built-in Dishwasher

The power went out and we cant use the reset button to get the alarm to go off. The error says 8. When the power went off it was not washing dishes and the door was not locked. Dish washer Model KDS-17A Thanks, Todd


I would try unplugging it for 30 minutes .. ... KitchenAid Dishwashers

I have a Bosch diswasher She6Af02uc/03 and its not even 6 months old. There is an error code that keeps appearing e-02 but I cant find what that means? Any help would sure be appreciated! Thanks in advance.


The machine is under the makers 12 months warranty contact the supplier.adrian,,,,,,,, ... Bosch 24 in. SHU43 Built-in Dishwasher

Water gets too hot on all progs - thermostat gone, presumably. It is an integrated dishwasher, and cant find model number. Manual says 9000 112 902 (8507) but no apparent model number.


... Bosch Dishwashers

We have a Meiko FV 40.2 and are getting Error 111, code 1 We can no longer find our manual. Any assistance you can provide would be appreciated. Thank you.


... Meiko FV 40.2 Dishwasher

I have a bosch SHV43A03GB dishwasher. It has a problem when it cut out water flow in. the guy who repairs it seem s only to have to push a button or switch under the machine to get it to work again, cant find switch/ button- please help!


Programmer not working ... Bosch 24 in. SHU53 Built-in Dishwasher

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

How do i clean the drain or screen at the bottom im getting an odor cant find the manual


Hi,Here is a tip that will help you with how to clean that dishwasher up and get it smelling good again... ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

DELONGHI DISHWASHER HI, we just purchased a Delonghi dishwasher DW67S/W and it reads Error code 4 which says that the inlet has been overfilled. How do we drain it or get it working? It wont allow us to do anything more. The store we purchased it from is closed so i cant ask them. Thanks for your help. Chocy


... Dishwashers

Error code e4 flashes on belling dishwasher idw604 , washer is empty cant get any programs to work


I found the solution myself. Underneath the machine, there is a plate. \015\012On the plate, there is a float and a\015\012 microswitch, when the water leaks onto the bottom plate it raises the \015\012float and activates the microswith which shuts d ... Dishwashers

New World Integrated Dishwasher DW60 E4 flashing and beeping. Managed to get it going for a while with a d/w cleaner, it filled, water heated but then E4 error kept flashing and it stopped, had to scoop water out. Cannot find instruction booklet to check fault. Please advise. Many thanks.


... Dishwashers

I have bought a fisher and paykel model DW60CSX1 second hand... i have connected all the relevant pipes and taps, the washer gets to a point in the cycle where it stops and thw 1st, 2nd and 4th lights flash and beep.. i cant find a users manual anywhere...


My manual says that this means the drain hose is crimped or bent, or the drain hose is too high. In other words, the drain can't drain for some reason. ... Fisher Dishwashers

I just installed a new Frigidaire dishwasher. Took it through 1 cycle as the directions indicate looking for leaks. I now have it full of dishes for its maiden voyage, and I get an Er uo code. Cannot find this error code anywhere. Can someone help me. M# FGHD2433KW Jamie


This is a vent problem you need to check the vent motor and make sure tha the wire have not been pinched by the door spring and make sure it is connected properly.the vent should be located on the top or possibly the right side of the cabinet. ... Dishwashers

I am getting "LE" for an error code. I can't find


HelloLE error in your LG front load washer is displayed when either the motor is not working or the control board thinks that the motor is locked up. A Hall effect sensor is used in these washer which monitors the speed and directio ... LG 24 in. LDS 5811 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1065 seconds