Having problems with your lg dishwasher lds5811 ?

how do i adjust door springs

door will not stay closed unless latched

Answers :

Repair Help & Product Troubleshooting for lg dishwasher lds5811

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I've just installed a Miele 5500SCU Dishwasher and the springs that support the door cant be adjusted far enough to take the weight of the door, does anyone have any suggestions?


If the dishwasher is brand new, then there is an issue with the configuration of the springs, i.e not mounted correctly. A factory dishwasher door should not need to be adjusted. However if it is older, it is possible that the springs came off, in wh ... Miele Dishwashers

Door problem Hi, I'm not sure of the model number but our Miele dishwasher has a very tight springback action on the door. This must be adjustable but I cant work out how! It is very tricky trying to load and unload when the door wants to spring closed all the time! Thank you, Sue


On my machine there is a torx screw at the top left hand side. You need to open the door to see the screw which sits behind the off-white flange (look for a hole in the flange). ... Miele Premier-Plus Built-in Dishwasher

Adjusting door spring tension on a Bosch dishwasher


Underneath are 2 L-brackets with the springs attached. Pull those out (with the door closed) and tension will be released. Shorten the strings attached to the springs and reinsert the L-brackets. ... Bosch 24 in. SHU43 Built-in Dishwasher

How to adjust door springs on this model dishwasher.


They are on the side of the unit there are slots on the side of the unit kinda tricky to get at. poss use pies of string or wire to pull it up on to the next notch. Dn load manual might have some illistrations in it? i have it somewhere email me. ch ... GE Profile PDW8060GSS Built-in Dishwasher

Door does not stay horizontal when opened. How do I adjust the door springs?


Hello Slosh,The are four torx screws (Two on each side) of the door panel near the bottom. The top screw controls tension and the bottom allows you to position the door. Be careful when loosening the panel as the screws will come out completely ... Miele 24 in. G638 Plus Free-standing Dishwasher

My miele dishwasher door all of a sudden drops and stays open half way. If i lift it up to close, it falls back down to half way. Adjusting the tension spring makes the door slam shut and not stay open in the down position


... Miele 23 in. Novotronic G841 Built-In Dishwasher

Kitchenaid dishwasher kud102crwh1 issue: door opens too quickly, no "braking" action like it used to have. Door is heavy and falls quickly. Adjustment? Spring broken?


Broken spring. ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

BOSCH DISHWASHER SHV55MO3GB 60CM HOW DO I ADJUST THE DOOR SPRING ON THE MACHINE? AT PRESENT WILL NOT LIE OPEN AND SPRINGS SHUT WHILST TRYING TO UNLOAD.


Do you want to adjust the door spring or the door latch? if the spring is damaged or misplaced you will have to open it and change it ... Dishwashers

Dishwahser AEG Favorit 4220ID (10 Year old) the door opens and falls to quickly, can the spring be adjusted to soften the fall and if so where is the adjuster??


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

Kitchenaid KUDI01IL door springs need adjusting


... KitchenAid 24 in. KUDI01IL - Multiple Color Free-Standing Dishwasher

How to adjust the door spring tension - Asko Dishwashers


... Asko Dishwashers

Where is the door spring adjustment on a Bosch SHV6803UC dishwasher


... Bosch Dishwashers

Adjust door spring tension on a viking dishwasher


... Dishwashers

How to adjust door tension spring on Miele g832sc dishwasher ????


... Miele Touchtronic G832SC Built-in Dishwasher

Want to install door spring on blakeslee d-8 but even with eyebolt adjuster short by 6 inches how to install


... Blakeslee D-8 Dishwasher

The door springs on the dishwasher need adjustment - how do I do this?


The door springs are accessable through the toe kick. There will be 3 or 4 steps where the spring can be attached. With the door closed and latched, so it can't fall accidently, remove the toe kick panel and with a pair of channel locks move the spri ... Indesit 23 in. DV62 IX Built-in Dishwasher

Door spring on model cdi 1012/2 is too stiff and difficult to stay down when loading dishes lost instructions on how to adjust


Went back to store and got them to download new instruction manual ... Candy Dishwashers

Spring adjust on door - Haier HDB24EA Built-in Dishwasher


... Haier HDB24EA Built-in Dishwasher

Cant find screws to adjust the door spring - Baumatic 18 in. BDW45.1 Built-in Dishwasher


... Baumatic 18 in. BDW45.1 Built-in Dishwasher

Dishwasher Door Tension Adjust on Electrolux EDW5500DSS


I just adjusted my Electrolux DW springs. The springs are on the bottom sides near the back. They pull on cables that hold the door (via pulleys). The springs can be moved to five different holes to change the tension, but I needed to pull the DW abo ... Dishwashers

Door Tension Adjustment on Electrolux Dishwasher


You should be able to remove the lower acess panel, and the tension springs are on both sides, cant really picture how to adjust tension( font or back), but there should be enough room to get a flashlight and you hands under there to make the adjustm ... Indesit 23 in. DV62 IX Built-in Dishwasher

Door mechanism door has 2 springs on each side, on the right the spring works on its own. But come to the left side and it has a long belt type piece of metal,the spring and a hook type piece that makes up how the door opens and closes.this left side has come apart and dont know how it goes together,therefore the door just drops very sharply to the dismay of my partner.plz reply to [email protected]


Wind metal strap around plastic bush and hook above hinge ... Candy 24 in. CD622 Free-standing Dishwasher

Door spring does not work.


Bryan,\015\012\015\012\015\012I do not have a place to order parts for a Neff dishwasher, but I know these dishwashers have springs in each hinge that will wear out/break over the years.\015\012\015\012Replacing those s ... Neff 24 in. S5409X0 Built-in Dishwasher

Hi, I have a small leak at the bottom right hand corner of the door. If you push in on the door while it's running it stops and the noise level goes down. Is there an adjustment for the door or would it just be the seal, it's 4 yr. old. My wife say's that the grand kids have leaned on the door in the down position , we try to keep it up when they are around , that's why I am asking about a door adjustment. Thanks


No adjustment. Try cleanig door gasket. If still leaks hinge probably got bent from leaning on door. Or door got bent. Needs to be taken apart to find cause for problem. ... Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0506 seconds