Having problems with your LG Dishwashers ?

Get an LE message - LG Dishwashers

Answers :

LE is a Motor error\015\012
\015\012\015\012Wiring connection is OK?\015\012The Impeller of Washing Pump is\015\012locked.\015\012The rotor of Washing Motor is\015\012locked.\015\012The Blade is locked.\015\012
\015\012\015\012Check the wiring connection.\015\012Replace the cause of restriction.\015\012Replace the Washing Motor.\015\012Replace the PCB
Repair Help & Product Troubleshooting for LG Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Delonghi dishwasher, it's a stand alone, like a washing machine. The water inlet is connected to the hot water tap, normally used for a washing machine. When we first started using the dishwasher, we kept getting the E4 error message, we reduced the water inlet pressure by turning down the tap, that worked for a while. Just a while ago, we started getting the E4 error message again, not sure we can turn down the tap any further without cutting the water off completely. Do you have a

The E4 error message could be because the water pressure is too low rather than too high. Can you let me know the exact model number of your dishwasher and I should be able to tell you more.\015\012\015\012Regards,\015\012BElectric ... Dishwashers

I have an Electrolux EWDW6505G Dishwasher. Had started a cycle, then opened the door midcycle when water was in the tub -- and accidently pressed "cancel." When I try to start a new cycle now, I was getting an "Error 01" message. After trying to get out of it, I'm now getting a "water serv" message. How can I reset?

... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

Did you get my message about my Miele dishwasher? I don't think I sent it. I am getting suds in the bottom of the dishwasher. Then sometimes all the cycle lights come on when the load is finished.

Hi \015\012\015\012 \015\012\015\012Suds left in the bottom of the\015\012dishwasher tub would indicate:\015\012\015\012Using too much detergent, using\015\012wrong kind of detergen ... Miele Incognito G818SCVi Built-in Dishwasher

My Miele Dishwasher (Excella Series G 2630 SCi) fails to fill. I get the message "Water inlet - Open the stopcock". I checked the water inlet filter and looked for hose kinks to no avail. I even checked the non-return valve. When I start the dishwasher I can hear a low hum (Not the pump) for a few second before the error message displays.

... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

I get an LE error message on my LG Dishwasher. I replaced the pump. Still get the LE error. Replaced the main control. Still get the LE. No blockage in the pump. What now?

When you receive the LE error code, unplug the machine for approximately 15 - 20 minutes. This will reset the microprocessor.Oversudsing is the main cause of LE error codes. Using non-HE detergents or too much detergent will cause stress ... Dishwashers

No matter which cycle selection in pushed, the dishwasher only starts up in the "normal" 93 min cycle. If I try other cycle options, and persist, I get an ER message and the cycle stops prior to the soap powder door opening and never completes the cycle. Only with turning off power for several minutes and receiving the PF message, and resetting ONE TIME that message can I then select any cycle, at which time the machine "defaults" to the "normal" full cycle. If I do not disturb that cycle, it wi

Looks like you are having a good deal of problems with the dishwasher.\015\012\015\012It will be helpful if you provide the make and model no. of the dishwasher.\015\012\015\012At this stage I can speculate the controller (ass ... Dishwashers

I have a Frigidaire ?AquaSurge with Speed Clean? Dishwasher Model FDB4315LFCO. After the dishwasher has been running and seems to be at the drying stage, I get this coded message: working/drying ER Clean S. What gives? Thank you so much for your help!!

... Frigidaire Dishwashers

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w

Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

I have LG dishwasher model LD 14AW1 I get error the message HE about 15 minutes into the wash cycle then the dishwasher turns its self off

HE refers to HEATER ERRORThe water is not heatedor the temperature inthe Tub is overheatedto over 95¡Possible causes¥ The Circuit of Heater is troubled.¥ The Thermistor is troubled.¥ T ... LG 24 in. LD-12BW5 Free-standing Dishwasher

I have a Firdgedaire Electrolux model GLD4355RFB1 DISHWASHER AND an Error message is appearing with flashing lights. The dishwasher will not run. How to I get back up and running? Is it a major issue?

What is the code? ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

I get a water outlet fault message on my asko d3531 dishwasher...water is filling at the bottom of the dishwasher and will not drain.

... Asko 24 in. D3530FI Built-in Dishwasher

We have a miele dishwasher and are getting a technical fault 68 error message. We have turned the dishwasher on and off and this did not fix the problem.

Peace friend,\015\012ngfam1 at your service\015\012\015\012Unfortunately I am not there hands on for you !\015\012You will need a good service tech.TO DIAGNOSE THIS ELECTRONIC PROBLEM!\015\012How old is the appliance? ... Miele Dishwashers

IE message Getting an IE message on dishwasher. Water is coming into the tank and heating, but after about 5 minutes, it kicks into an IE error. We have checked the water inlet and the spray arms and everything appears okay. I have read the comments about checking the float, but how do you do this? Any other suggestions would be helpful.

My solution was, after LG sent me a second dishwasher that ALSO did not work, to demand a refund. Then I went and bought a KitchenAid~ it's awesome! ... LG LDF6810 Built-in Dishwasher

My deceased parents have a GE dishwasher (don't know the model number - can't find it on the machine and can't find the paper work) that stops working shortly you start it and displays a message on the front panel that says "Blocked wash arm - check for wash arm obstruction - restart". We restart it and get the same message shorty thereafter. This happens when the washer is COMPLETELY EMPTY, even when we remove the bottom rack. It first started after several month of inactivity. We'll just t

Could be false sensor input, could be that the arm is not turning, I am not sure how old your machine is, but age could play a part if the arm is "in fact", not turning. If you are not mechanically inclined, I would suggest that a qualified repairma ... Dishwashers

I have a Frigidaire 4000 Series Dishwasher, Model# FDB4315FCO, almost six years old. It acts as if there is no power. There is no error code. If I pull the power cord I get a "PF" message.

... Dishwashers

Error message on a Bosch Dishwasher SMS65E02UK.... Not getting hot :-(

... Dishwashers

Hi There, I have a F&P 918td dishwasher which has stopped working. Whenever I press any of the buttons I get 5 very quick beeps and then nothing - no error message, nothing the display is blank. If I turn it off at the wall and then back on again the display briefly shows two characters that do not show up in the manual as valid errors. Any ideas anyone?

Sounds like a fried board. ... Dishwashers

Hi, I have the Bosch Logixx Dishwasher . BOSCH SGS0922gb /06 .. aged about 6 years old .... When I press the on/off button 'on' the led display only shows the 'not started' message. When I press the on/off button 'off' the led display lights up momentarily with 'start' etc just before I have fully released the button. I have tried a new switch and the same happens so not that. ALSO i can sometimes see S1....> on the top panel and get the machine to show on the top panel the close door

... Dishwashers

BOSCH SGS 5602 Dishwasher It got stuck on 45 mins and the pump was working overtime but there was no water in the machine. Looked it up on the internet and found similar problems caused by the machine getting the message that it was flooding. Emptied the overflow and everything was fine until it reached the same stage in the programme. I assume there is a leak somwhere but how do I find it

... Bosch 24 in. SGS56A72 Built-in Dishwasher

I have a SMEG DWF614 SS dishwasher. I continue to get an E8 error message. The diverter valve motor turns freely & the motor turns freely when they are seperated. However, when they are assembled, the motor turns the valve & continues to try turning the valve when the valve is on its stop position. Is the motor & valve faulty or is it the control. If you can answer, what part number would I require. Regards Leighton Davies

... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

My fisher paykel dishwasher is filled with water and will not drain. I have looked for damage to ring( none) or any impingements( none). I get a F2 message which I believe indicates a rotary problem.

Hi,no problem with our chat sesson...but your answer is here----if you pull out the lower drawer, there s aside release pin on either side of bottom corner of hte drawers when extended. a small maybe quarter sized hole( no nee ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Get an LE message - LG Dishwashers

LE is a Motor error\015\012\015\012\015\012Wiring connection is OK?\015\012The Impeller of Washing Pump is\015\012locked.\015\012The rotor of Washing Motor is\015\012locked.\015\012The Blade is locked.\015\012\015\012\015\012Check the wir ... LG Dishwashers

Getting an E4 error message on portable dishwasher - Kenmore 18" ,mg DDW1805W.

E4 means the overflow sensor has activated.Under the washer is a pan - with a sensor. If it gets any sort of water - it activates.You can remedy this issue by pulling ut the dishwasher, and tilting it up to about a 45 degree angle to empt ... Kenmore 17459 Free-standing Dishwasher

Getting error message E1 what does this mean - LG LDF6810ST Stainless Steel Built-in Dishwasher

E1 leakage error\015\012\015\012The excessive RPM of\015\012Washing Motor\015\012happened during Wash\015\012cycle due to water\015\012leakage.\015\012\015\012\015\012Water leakage in Hose connections.\015\012Water is leaked by damages.\0 ... LG LDF6810ST Stainless Steel Built-in Dishwasher

My Adora S dishwasher doesn't seem to complete its cycle and the water doesn't seem to get hot. It always comes to a stop with a flashing message 'F7'. What does this mean? Many thanks, Maria

... General Electric Adora GHDA670N Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1800 seconds