Having problems with your LG Dishwashers ?

The metal clips that secure the dishwasher to the counter have broken. can I get the parts# so I can figure out how to order them online? Thanks very much


Answers :

Repair Help & Product Troubleshooting for LG Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The metal clips that secure the dishwasher to the counter have broken. can I get the parts# so I can figure out how to order them online? Thanks very much


... LG Dishwashers

I have a Maytag dishwasher, model #MDB4100AQ. Is it possible to replace the door panel on this dishwasher? I see the relevant part number (99002109) in various online parts stores, but before I order it I want to make sure this is a do-it-yourself job. I can't see any screws or other hardware that's holding the panel in place.


You may not have to deal with the screws. Check out ApplianceArt.com to see if they might have a solution to fit your needs. I know they have stainlesss options, but also colors and designs. ... Maytag Dishwasher

Bosch dishwashers I have 2 in my kitchen. 10 years old. BOTH have broken part on the top rack of the rolling part. Can I order the parts online? Thank-you.


Yes . you can go to thermador .com and order these parts.they will send them to you 2-7days ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

DD603 Double drawer dishwasher: How do you take the clear coverplate completely off the top drawer in order to replace the motor? I can't figure out how to remove the part that attaches to the front of the drawer.


I am assuming you are fully conversant with the unit and have taken out the drawer from housing rail.\015\012\015\012To get the wiring cover off you then have to..\015\012Carefully release the four wiring cover clips from the fro ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

I need to replace the drain pump motor/impeller on my LG ldf6920 dishwasher. How much dissasembly do I have to do, and how do I do it, in order to replace this part?


... LG LDF6920 24 in. Built-in Dishwasher

I put too much voltage into my Frigidaire dishwasher (FDBB2040FS1) is there a replacement part that can be ordered?


You have to check the electrical damage and replace the parts. It may be a fuse problem if you are lucky! ... Frigidaire Dishwashers

Hi, i have a hotpoint bc1450 intergrated slimline dishwasher and the spring part mechanism whch holds the detergent holder has become unopperable due to the tablet holdermdoor not staying shut, there is a small white plastic tea pipe which seems to be the problem, can thisbe ordered? If so where from? Is it easyto fit? Any help would be much appreiated. Thank you


... HP Dishwashers

Can a replacement part be ordered for my frigidaire dishwasher (FDBB2040FS1) since my husband put too much voltage into the power source. It is directly connected (hard connected) there is no plug, it goes straight to the breaker.


... Frigidaire Dishwashers

The dishwasher isn't cleaning well and doesn't use much rinse agent. I have tried and tried to figure out why the dishwasher isn't washing dishes well and I can't figure it out. I haven't called the manufacturer yet and maybe I should. I've changed the cycles and that doesn't matter. First thing is that it doesn't really use very much rinse agent, so my glasses look yucky. Second thing is that I can tell it hasn't cleaned the dishes well because the inside of the door isn't clean. With a s


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

I have a kenmore dishwasher 665.16529000. When I opened the dishwasher this am the pressure tower part number 8268862 was not connected-it was off. The exposed part is a black rubber thing. It looks like a doughnut. I can't figure out how to get the pressure tower re-connected.


The tower attaches to the bottom rack and when the bottom rack is pushed in the tower sits on top of the following part. Check for cracks in the tower. It may explain why you cannot fit it back in place.\015\012\015\012 ... Kenmore Dishwashers

The maytag dishwasher model mdb7130AWB stoped cleaning correctly so we went from the arm assembly in bottom of dishwasher down to the cutter disc and we found a crack in the housing so i ordered that piece. the new part was designed a little different but we put it all back together the way it came off. but it started and ran maybe 1 minute and stopped. so i have pulled up the diagram and see some problems. in the current diagram. original there was no part 37, 17 19 and 3, alos the crew d


... Maytag MDB7130 Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

I am trying to clear the drain on my ge portable dishwasher. I have removed the 2 screws for the drain cover but my dishwasher has another part on top attached to the spray arm that is holding my cover on . I can not figure out how to remove this part. the model # is gsc5511pooww


... GE Dishwashers

My dishwasher Fisher & Paykel dishwasher Mod DD603. Its trim assembly (pn 526744) has broken and I order the part. I want to know how to replace the part. Please help me with step by step. Thank you


Www.stokes-aus.com.au/.../DISHWASHERS/599084%20Dishdrawer-Version%203%20%20eg%20%20DD603%20etc.pdf\015\012\015\012\015\012\015\012There is an exploded diagram?\015\012\015\ ... Dishwashers

My KichenAid KUDS011 has functioned well until this morning. When I push any of the buttons on the keypad, nothing happens. I noticed there is still water in the bottom of the dishwasher from the last dish washing. Also, I've heard there is a screen or similar part in the bottom of the dishwasher that needs to be cleaned occasionally. I haven't figured out how to remove the bottom center of the dishwasher to access this for cleaning.


If the drain or screen are clogged, the machine may no operate.Unscrew the the 2 long screws on bottom, remove the basket, there may be a flapper under the basket, For pics, see here: http://www.contractorssolutions.com/dishwashers. ... Dishwashers

I need to locate a circuit board part for a miele dishwasher G692 SCI PLUS. The part number is EPL 545-A. M.-NR. :05491860. iF YOU CAN HELP ME FIND WHERE I CAN BUY THIS PART IT WOULD BE MUCH APPRECIATED.


... Dishwashers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

Upper spray arm and tube assembly. This part fell off the back wall. Can not figure out how to get it to stay on again. Looks like it should clip in, but nothing to snap it in place. The part does not look brocken when compared to the part would order to replace. No info in the manual and their service department was no help, How do I fix this.


Hi,\012Those p[arts wear and even though the parts do not look broken they are not up to the specs. of a new part...\012That is not that hard to fix and you can easily buy the parts yourself online... ... Bosch 23 in. SHU 8805 Built-in Dishwasher

When I turn on dishwasher it sounds like it's chewing up rocks. Found a broken plastic disk as I was taking it apart just above black plastic rotor above motor. Where can I find an exploded view of parts so I can order the proper parts and attach it in the proper way because original parts are destroyed ?


... Jenn-Air JDB6510 Built-in Dishwasher

Dishwasher problem Our Asko 1353 dishwasher stops halfway through its's wash cycle. I suspected the thermostat, as it seemed loose in it's holder and not tight against the tub. After I tightened the holder the problem is still the same. Also, the on/off switch (pressure switch?) does not stay in the on position and when I looked it over I found one of the crimp on terminals had melted. Short circuit? Too much resistance from bad thermostat? How do I check the thermostat before I order a new one?


I think your switch may just be bad,but to check the t-stat remove both wires and use a multimeter,set the meter to ohms and connect the two leads to the terminals on the t-stat.with the t-stat to off you should read an (ol) open condition,when you t ... Dishwashers

The dishwasher is leaking on the right side, could I order parts for the dishwasher?


Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... GE Nautilus 24" Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

I'm going to install a gu2700xtst dishwasher over a laminate flooring. The dishwasher is on order and I do not know the minimum height. How much clearance do I need under the counter top?


The dealer should be able to provide you with that info. ... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2044 seconds