Having problems with your LG Dishwashers ?

CAN YOU GIVE ME REVIEWS OF LG LDF7551WW? - LG Dishwashers


Answers :

I find\012the LG dishwasher to be of good quality and the only complaint I have regarding the LG brand of dishwasher is that the motors used all have Korean bearings and after a year or so you end up with a dishwasher that gets noisy (a hum) that gets louder, By replacing the motor bearings with good quality bearings solves the problem a small price but you must do this or have it done!!!
Repair Help & Product Troubleshooting for LG Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

CAN YOU GIVE ME REVIEWS OF LG LDF7551WW? - LG Dishwashers


I find\012the LG dishwasher to be of good quality and the only complaint I have regarding the LG brand of dishwasher is that the motors used all have Korean bearings and after a year or so you end up with a dishwasher that gets noisy (a hum) that get ... LG Dishwashers

Looking for LG dishwasher reviews


... LG 24 in. LDS 5811 Built-in Dishwasher

After starting my dishwasher ADG 9340/1 (any program) and after pumping evt. (rest)water , the machine won't take fresh water in and gives an acoustic alarm ! After opening the dishwasher , I can see that the "Start"-led is blinking in sequences of six blinks . Can you give me please, a possible cause and/or solution to this problem !


... Dishwashers

I have a Candy CD650 dishwasher which is not washing properly. Basically, the detergent tablets seem to be getting stuck in the tray. Most times I open the door, the tablet is a pile of mush inside the tray. Other times it is on the bottom of the dishwasher - again a pile of mush! Sometimes, it starts the program & sounds like it's about to start a wash cycle, but then gives up! it gives one short woosh, the stops again. Any ideas how to fix this? I don't have a manual so can't look there.


... Candy 24 in. CD650 Free-standing Dishwasher

LG Dishwasher I just purchase a new LG Dishwasher. The installer told me that the dishwasher can not be flush to the Kitchen cabinets because of the metal cases around the dishwasher and also it can not be aligned with the top and bottom of the cabinets because the door is too thick to give it clearance to open. I have had two other dishwashers in this spot and never had any issue. Thoughts? Thanks, Jen


I can't say for sure, but it is possible this unit is deeper than previous units. The only way to tell for sure is to measure the previous unit and compare to this one.I would be suspect there may be something simple preventing the dishwa ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Dishwasher leaking my GE Natulus dishwasher is leaking from the bottom seal, Is the two pieces that are at the very bottom that hold the motor where the seal is? I'm not seeing a seal. I'm not sure if that is where it is leaking. I've got the thing torn apart so it is difficult for me to say where it is leaking. I'm going to give it a whirl. Don't know if the repair is worth the trouble. The GE dishwasher is only 7 years old. What is the avg life of a dishwasher. I'm sure it's not top of the lin


There is a front door seal that may be the issue. It seals along the door sides/top and continues under the door to seal the bottom surface when closed. Mine pulled out of the seal channel under the open door where you can't see it without a small mi ... GE Nautilus 24" Built-in Dishwasher

The dishwasher cycle starts and gets 20-30 minutes in and then stops giving me the - - - like the door was opened, but it was not. If I use extra heated wash, the cycle stops at 63 minutes left. If I use the regular wash cycle, it stops at 43 minutes left. I have to click the resume button to get the dishwasher to complete the wash cycle. This has been happening evey time I use the dishwasher the last 2 weeks. It is Whirlpool dishwasher model GU2700XTSS! and is only 3.5 years old.


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I suspect based on your description...\015\012\015\012"stops giving me the - - - like the door was opened, but it was not, I have to click the res ... Whirlpool Dishwashers

Leaking FDW60 I have a Hotpoint FDW60 dishwasher. yesterday it tripped our house electrics and then we had water flooding out of the dishwasher. Through a process of elimination I have now discovered that water is leaking from the drainage sump in the centre of the babse down onto the motor or other electrics. I have looked for loose hoses and there are none visible from the base of the dishwasher, can you give some ideas where the water might be coming from?


Had a similar problem when I removed the lower spray arm for replacement (see http://www.fixya.com/support/t234402-fdw60_dishwasher ) and didn't put the centre retai ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hi there I purchased a Simpson Riviera 966 Dishwasher about 10 years ago and was very happy with it. All of a sudden water was flooding the kitchen from somewhere under the dishwasher, and not having the money to repair it at the time, it has just been sitting, and possibly the seals may need replacing. All electronic funtions seem OK on it however. Would it be possible to give me a quote on repairing the dishwasher - I HATE washing up !!!! My name is Hartley Cowderoy, and I Live at 65 Rosemount


... Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

Hello everybody, I hope that you gona a give me some tips for repairing my dishwasher mashine. A few days ago, the error F2 appears on my dishwasher machine (Baucknecht GSI 5894) I checked the pump for the waste water is ok. the tap water is not taking in,I checked the hoses they are ok as well I turned off and on and same time pressed the button reset and choosing the programm on the dishwasher few seconds trying to start and again apperas F2 . Hopefully someone can help me. Best regard


Possible the inlet valve has given up and is not allowing water in.\012Also possible there is a slight leak enough to shut the water off (safety feature) - Check underneath for a float mechanism and any water there. ... Bauknecht Dishwashers

We have the Maytag dishwasher model # MDBH979AWW model code 119540, bought 6/10/2010. The last month it has started making an odd grinding noise............I always (!) rinse anything that goes into the machine... plus the inside of the dishwasher has a build up of dirt..... I was using a liquid dishwashing soap. Any help you might give will be so appreciated.


... Maytag Dishwashers

I have a nardi dishwasher and it does not wash the dishes properly. sometimes the water does not circulate.Sometimes there is no water at all. I use the proper finish stuff, dishwash salt, tablets rinse aid. each time I call an engineer out they all give me a different diagnostic. HELP. Please


Nardi dishwaser water will not drain away after wash cycle. ... Dishwashers

Cuisina Dishwasher Integrated Cuisina dishwasher dw-007 giving E4 code. Thanks.


... Dishwashers

NEED REPAIR MANUAL OR GE PROFILE DISHWASHER MODEL;#PDW7300J01CC CAN NOT FIND MANUAL OR REPAIR INF FOR MY DISHWASHER MODEL #. WILL OTHER MODEL # STILL GIVE ME A WIRING DIAGRAM?


... GE Dishwashers

My elecrolux dishwasher gives me error code 11. What do I do? I have the manual, which says that it timed out before it could establish a drain... but there is no info on how to fix it. The dishwasher is new, but it has run 6 or 7 times with no problems.


... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

Good day I have a whirlpool dishwasher (Turbo silence 635) Could any body give me the wright description I need the manual for the dishwasher


... Whirlpool Dishwashers

OE Error We have LG dishwasher which gives an OE error. This was an error 6 months ago and this was under warranty. They had to change the pump. Now it is not under warranty. I checked for clogging in the drain pipe where it connects to the garbage disposal. Could not find a problem. This dishwasher is nothing but trouble. Any ideas/suggestions?


You do not have an "OE" error, it is actually a "DE" error. (Drain error) If after 5 minutes of drain time the pump motor RPM's haven't gone up the dishwasher knows that there is still water in the tub and throws the "DE" error. Often times the pro ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

Dishwasher Stinks Our dishwasher has recently begun to smell like burning rubber when it is running. Still washes the dishes fine, and we pulled it out several times but can find no smoking, smoldering, etc to pinpoint the problem area. Fumes give me a headache. Can anyone help?


Is your dishwasher less than a year old? if so you need to call bosch and have all the gaskets replaced. they tried a new chemical to make the gasket but now have found that after the dry cycle the gaskets put off a strange odor like your discribing. ... Bosch 24 in. SHX99A15UC Stainless Steel Dishwasher

Whirlpool dishwasher To whom it may concern, The dryer does not dry the dishes all the way. It is a whirlpool dishwasher. Can you give me an idea, what it may be. Thanks


First how old is unit ??? new to you??? a few things to check on your part, for better results run the hot water in your sink b4 you start your d/w. are you using a rinse agent (Rinse Aid) newer machines actually count on this for better drying. is ... Dishwashers

Whirlpool dishwasher I have a whirlpool dishwasher model # 665.16519202, and the clean light flashes 7 times then pauses. I was having a problem with the machine working properly right befor the fault code came up and froze it. Can you give me any guidance as to the problem of this washer? Thanks in advance.


If the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive).To resolve this you will have to reset the console. Do this by closing ... Whirlpool GU2400XTP Built-in Dishwasher

GE profile Dishwasher gives an error: C5 - GE Dishwashers


C5 - Low Water Fill - This error usually indicates bad water inlet valve. Check for low water pressure to unit. ... GE Dishwashers

My brother-in-law put Dawn dishliquid into my dishwasher and I cannot get rid of the suds. Is my dishwasher ruined or can you tell me how to get rid of this mess. When I turn it on to try and run clear water through, it runs all over the floor. Thank you for any help you can give me...


Ooooohhhhhhhhh nnnnnnnnooooooooo!!!!!!!!!!!!!!!!!!!!!!!.go get some vinegar and pour it in the d.w itself your gonna have to start and stopit for a while but the vinegear will cut thought the suds pretty quickly, stand a shallow bowl upright and fill ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

Not cleaning my dishwasher goes thought all it's cycles,but when it is done the dishes are still greasy and the top dishes are still dirty.i have checked the water pressure the psi is 64. i have also cleaned all the wands and drain.can you please give me something less to do.my dishwasher is only 3 yrs old. i have not been able to use it in about a year know.


Check the wash arms make sure that they can spin ... open in mid cycle check water level and arm spin...also check water temp... hope it helps ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1739 seconds