Having problems with your LG Dishwashers ?

Hook up water supply hot or cold water - LG Dishwashers


Answers :

Repair Help & Product Troubleshooting for LG Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

Hook up water supply hot or cold water - LG Dishwashers


... LG Dishwashers

Can i use my candy aquaviva cd 622 dishwasher if i only have a cold water supply to connect to it - even though it has pipes to connect both hot and cold water supplies?


I strongly advice against it, because the pumps are gonna assume thier is water their and is gonna try to pump the water in, and u will burn them up if their is no water their.. how ever you could get a splitter and run water to both hoses. even thou ... Candy 24 in. CD622 Free-standing Dishwasher

I have a kenmore ultra wash quietguard deluxe & notice it has been connected to the hot water supply. As I am making some changes I would prefer to connect the cold water supply will this make any difference to the operation of the dishwasher. The unit is less than 2 years old. Thank you


Depends... some units heat the water for you in which case it would not matter and would infact save you money over time. If your unit does not heat the water your going to want to leave it alone for better cleaning performance. Check your owners man ... Kenmore Dishwashers

Asko dishwasher D5122XXL I've got the F2 light flashing. How do I reset it? Or do I have to get service people to do it? I think there's nothing wrong with the pump or drain, since I actually poured a jug of hot water in to the dishwasher. ( it's hooked up to cold water pipe)


... Asko D5122XXLS 24 in Builtin Dishwasher

My dishwasher DW60 does not complete the program and drain the hotwater leaving hot water in the bottom of the dishwasher however when I run a prewash cold water cycle the water does drain away and the dishwasher program works correctly do you know why it drains cold water okay but not hot water


... Dishwashers

RE: Whirlpool dishwasher, [email protected] DU810CWDG0, Serial #FE1711925. I have an older model that was given to me & I'm trying to hook it up without a manual. Do I hook it up to HOT water or COLD?


Hot water only on dishwashers ... Dishwashers

Dishwasher Do you hook up a dishwasher to the hot water line or the cold?


Hook it up to HOT WATER! ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Do we hook up the cold water side or the hot water side when installing the dishwasher?


Hot ... Kenmore 24 in. 15932 Built-in Dishwasher

Should the bosch dishwasher be hooked up to the hot water or cold water line when making the connection?


... Bosch SHU5315UC Dishwasher

Does the dishwasher hook up to a cold or hot water line?


... Maytag Dishwashers

Hot cold water supply - Tecnik 18 in. TKD7000 Built-in Dishwasher


... Tecnik 18 in. TKD7000 Built-in Dishwasher

Hot or cold water supply to a skt50 bosch tabletop dishwasher


... Bosch Dishwashers

Have been given a LG dishwasher LD12AW2 from friend but they didnt tell me whether it hooks up to cold water or hot can you tell me please


Hi,\015\012 You should be able to use either.\015\012It really depends on your cheapest method of water heating.\015\012If you use hot, then the connector hose should be for hot water. \015\012Using a hot supply will result in ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Does the water supply hook up to hot or cold input line?


Cold water in ... the machine will heat it if necessary ... ... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

I have a GE Nautilus dishwasher GSD2230F01WW is it hooked into the hot water under the sink or the cold ?


It should definitely be hooked into the hot water...and the temp of the hot water should be around 120degrees and not to exceed 150 degrees as dish damage can occur. There is a heat assist in the DW that helps to heat the water temp also.I hope ... GE Nautilus 24" Built-in Dishwasher

Need a new sink- now THE SINK has 4 holes to accomodate hot cold water faucet and an air gap thing that is hooked under the sink to dishwasher and garbage disposal- can we not rehook that air gap kit and just get a sink with three holes for faucet only?? a quiet wash whirlpool model DU7800XS_3 -need info. linda


Yes you just need to run the hose to the top of the counter hieght to create a high loop. Basically does the same thing as an air gap. Here is a video showing this\015\012 ... Whirlpool GU2400XTP Built-in Dishwasher

Need install guide for bosch dishwasher model smu 2042 uc Need to know if it suppose to hook up to cold or hot water?


Hi,\015\012\015\012Welcome to FixYa.\015\012\015\012The dishwasher must be connected to an adequate hot water supply.\015\012\015\012Adequate meaning a good strong rate of flow and pressur ... Bosch 24 in. SMU20 Built-in Dishwasher

Kenmore dishwasher. The upper rack is not getting clean. Even very light residue remains. And, detergent is left in door at end of cycle. The bottom is filling up, so I don't think it's the intake valve. Also, all the blade openings appear clear. I am noticing that hot water is not filling the dishwasher when I first run the cycle. Even if I have hot water running in the sink, the dishwasher fills with cold or warm water. So, I think this is the problem. What should I do? Thank you in advance!


I find it odd that the dishwasher is filling with cold water if the water is hot at the sink. It sounds like the dishwasher is connected to the cold water line rather than the hot. Check under your sink; if you've got standard plumbing, the dishwas ... Dishwashers

I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

Disconnected dishwasher and moved out in order to tile the kitchen floor. Ten days later reconnected dishwasher. Turned on water supply to leak check -- no water is getting into the washer. - Ran hot water from sink side to see if that would help, no such luck - Disconnected water line and water is in the line up to the connection point at dishwasher. Looked inside valve of dishwasher for obstruction - no such luck - Disconnected both ends of water line and blew in line to check for obst


... Bosch Evolution 500 SHE45M05UC Stainless Steel Dishwasher

I have a Neff Dishwasher and I think the problem is due to the cold water inlet valve. When the dishwasher starts it drains any water and then should stat to fill. If I monitor the voltage to the valve it does switch to 240V but still fails to fill. I have verified that the cold supply works OK and the filter on the inlet is clean. The dishwasher is a NEFF GB5121 and is about 20 Years old.


... Dishwashers

Water drips out where the prtable dishwasher hooks up to the water supply. It is not the washer. It looks like it could be an o-ring inside the assembly that hook up to the water supply


... Whirlpool 24 in. DP940PWP Free-standing Dishwasher

Leaking from under dishwasher. Has run great since 1996. Under counter model in manufactured home. Chnaged to drop in pellet dishwasher detergent and it ran great. There is no water inside the dishwasher circular drain. We never use the heating coil to dry the dishes. We have turned off the water supply line under the sink to the dishwasher. Cool clear water is running out from under the bottom right corner. The hot water heater is right next to it and everything is dry and warm under it which i


Hi,Depending on the model you have this could be a couple of things. The most likely suspect is the water inlet valve. What I would recommend to do is take the bottom toe panel off, typically there are either 2 or 4 screws holding this pa ... Dishwashers

Zanussi DW908 dishwasher will not fill with water, when filled manually completes cycle untill fill time again. when filled continues on until water needed again. Only cold supply to machine. Water coming to valve, removed valve and freed it up as it was stuck, water flows through the valve when disconected from the dishwasher at filler pipe which leads up the side of washing chamber. When all connected up water will not enter the dishwasher. I,m beaten as I cannot access this area without maj


\012\012Hi,\012Here\012is a tip that will help you to find out why water will not come into\012the dishwasher... Dishwasher Trouble ... Zanussi Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2080 seconds